회원 및 비회원 모두 열람이 가능합니다. 최대 업로드 가능한 용량은 20MB 입니다.

안녕하세요.


고도리입니다.


근래, 몇가지 처리할일이 있어서 새롭게 ARMv7-a/NEON 을 enable 시킨 툴체인과

이를 이용한 Root Filesystem/Ramdisk를 만들어 보았습니다.


대략 RAMDisk 크기는 25M 정도 되도록 구성하였고, 로그 보시면 아시겠지만

4초 정도면 부팅이 됩니다. 실제 조금 더 튜닝하면 3초 정도는 끊을 듯 합니다.


사이트 안정화 되는대로 올리도록 하겠습니다...^^


현재 Exynos4210(V310) 800Mhz에서 테스트한 것입니다.

===================================================================================


OK

U-Boot 2010.03 (Sep 25 2011 - 22:16:42) for ORIGEN Android

        APLL = 800MHz, MPLL = 800MHz


Checking Boot Mode ...OMPIN : 3
 SDMMC
PMIC:   ARM 1.20V, INT 1.16V, G3D 1.11V

[I2C->ERR] Timeout Slave Address

[I2C->ERR] Timeout Slave Address

[I2C->ERR] Timeout Slave Address
Board:  origen
DRAM:    1 GB
MMC:   host->clock: 400000
host->clock: 50000000
        3827 MB
host->clock: 400000
host->clock: 50000000
In:    serial
Out:   serial
Err:   serial


Checking Boot Mode ...OMPIN : 3
 SDMMC
board_late_init
Hit any key to stop autoboot:  0
ORIGEN #
ORIGEN #
ORIGEN # dnw 40008000
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x40008000, Download Filesize:0x301140
Checksum is being calculated....
Checksum O.K.
ORIGEN # dnw 48000000
Insert a OTG cable into the connector!
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x48000000, Download Filesize:0x618cf8
Checksum is being calculated.......
Checksum O.K.
ORIGEN # setenv bootargs root=/dev/ram0 rw rootfstype=ext2 console=ttySAC2,115200n81
ORIGEN # bootm 40008000 48000000
Boot with zImage
## Loading init Ramdisk from Legacy Image at 48000000 ...
   Image Name:   Ramdisk
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    6393016 Bytes =  6.1 MB
   Load Address: 41000000
   Entry Point:  41000000

Starting kernel ...

U.compressing Lin
                  one, booting th[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.7 (root@godori) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #35 SMP PREEMPT Wed Nov 9 18:20:06 KST 2011
[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: SMDKV310
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Truncating RAM at 60000000-7fffffff to -67ffffff (vmalloc region overlap).
[    0.000000] CPU S5PV310 (id 0x43210010)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] s3c_register_clksrc: clock armclk has no registers set
[    0.000000] mout_audss: bad source 0
[    0.000000] S5PV310: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
[    0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[    0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[    0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[    0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[    0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[    0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_cam0: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_cam1: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000
[    0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_sata: source is mout_mpll (0), rate is 133333333
[    0.000000] sclk_spi: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_spi: source is mout_mpll (6), rate is 80000000
[    0.000000] sclk_spi: source is xusbxti (1), rate is 24000000
[    0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
[    0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 200000000
[    0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 133333333
[    0.000000] sclk_pwi: source is xusbxti (1), rate is 12000000
[    0.000000] mem infor: bank0 start-> 0x40000000, bank0 size-> 0x20000000
[    0.000000] bank1 start-> 0x60000000, bank1 size-> 0x8000000
[    0.000000] CMA reserve : fimg2d, addr is 0x5f800000, size is 0x800000
[    0.000000] CMA reserve : jpeg, addr is 0x5f700000, size is 0x100000
[    0.000000] CMA reserve : fimc3, addr is 0x5f400000, size is 0x300000
[    0.000000] CMA reserve : fimc2, addr is 0x5dc00000, size is 0x1800000
[    0.000000] CMA reserve : fimc1, addr is 0x5d300000, size is 0x900000
[    0.000000] CMA reserve : fimc0, addr is 0x5cf7c000, size is 0x384000
[    0.000000] CMA reserve : mfc1, addr is 0x5ab7c000, size is 0x2400000
[    0.000000] CMA reserve : mfc0, addr is 0x5877c000, size is 0x2400000
[    0.000000] CMA reserve : fimd, addr is 0x582cc000, size is 0x4b0000
[    0.000000] CMA reserve : pmem_gpu1, addr is 0x578cc000, size is 0xa00000
[    0.000000] CMA reserve : pmem, addr is 0x538cc000, size is 0x4000000
[    0.000000] PERCPU: Embedded 7 pages/cpu @e0008000 s5888 r8192 d14592 u65536
[    0.000000] pcpu-alloc: s5888 r8192 d14592 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 162560
[    0.000000] Kernel command line: root=/dev/ram0 rw rootfstype=ext2 console=ttySAC2,115200n81
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 512MB 128MB = 640MB total
[    0.000000] Memory: 431380k/431380k available, 223980k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
[    0.000000]     vmalloc : 0xe8800000 - 0xf0000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0032000   ( 168 kB)
[    0.000000]       .text : 0xc0032000 - 0xc056e000   (5360 kB)
[    0.000000]       .data : 0xc058e000 - 0xc05d4880   ( 283 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:396
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC2] enabled
[    0.479749] Calibrating delay loop... 1595.80 BogoMIPS (lpj=3989504)
[    0.591325] pid_max: default: 32768 minimum: 301
[    0.596024] Mount-cache hash table entries: 512
[    0.600818] Initializing cgroup subsys debug
[    0.604683] Initializing cgroup subsys cpuacct
[    0.609146] Initializing cgroup subsys freezer
[    0.613570] CPU: Testing write buffer coherency: ok
[    0.618576] L310 cache controller enabled
[    0.622427] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache Size: 1048576 B
[    0.635026] >made stopper
[    0.645023] >made stopper
[    0.655100] CPU1: Booted secondary processor
[    0.655163] Brought up 2 CPUs
[    0.660914] SMP: Total of 2 processors activated (3191.60 BogoMIPS).
[    0.671966] regulator: core version 0.5
[    0.674441] NET: Registered protocol family 16
[    0.679597] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.685026] s3c_rtc_base: e8808000
[    0.693325] S5PV310: Initializing architecture
[    0.697033] samsung-pd samsung-pd.0: power domain registered
[    0.702046] samsung-pd samsung-pd.1: power domain registered
[    0.707654] samsung-pd samsung-pd.2: power domain registered
[    0.713243] samsung-pd samsung-pd.3: power domain registered
[    0.718886] samsung-pd samsung-pd.5: power domain registered
[    0.724523] samsung-pd samsung-pd.6: power domain registered
[    0.730168] samsung-pd samsung-pd.4: power domain registered
[    0.736095] UMP: UMP device driver  loaded
[    0.753504] bio: create slab <bio-0> at 0
[    0.766181] SCSI subsystem initialized
[    0.768640] usbcore: registered new interface driver usbfs
[    0.774166] usbcore: registered new interface driver hub
[    0.779361] usbcore: registered new device driver usb
[    0.784659] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.789294] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
[    0.835053] regulator: VDD_33_ABB: 3300 mV
[    0.839759] regulator: VDD_11ON: 1100 mV
[    0.844294] regulator: VDD_11OFF: 1100 mV
[    0.848918] regulator: VDD_18ON: 1800 mV
[    0.853459] regulator: VDD_18OFF: 1800 mV
[    0.858077] regulator: VDD_18AUD: 1800 mV
[    0.862708] regulator: VDD_33OFF: 3300 mV
[    0.867331] regulator: VDD_33ON: 3000 mV
[    0.871870] regulator: VDD_11ON_PLL: 1100 mV
[    0.876741] regulator: VDD_AUD: 3000 mV
[    0.881185] regulator: AVDD18_SWB: 1800 mV
[    0.885898] regulator: VDD_33ON_LAN: 3300 mV
[    0.890777] regulator: VDD_33OFF_EXT1: 3300 mV
[    0.895832] regulator: VDD33_SWB: 3300 mV
[    0.900449] regulator: VDD_33OFF_EXT2: 3300 mV
[    0.905508] regulator: VDD_MIF: 1200 mV
[    0.909242] regulator: VDD_ARM: 775 <--> 1250 mV at 1250 mV
[    0.914899] regulator: VDD_INT: 750 <--> 1100 mV at 1100 mV
[    0.920530] regulator: VDD_G3D: 900 <--> 1200 mV at 1100 mV
[    0.926173] Division by zero in kernel.
[    0.928720] [<c003a318>] (unwind_backtrace+0x0/0xfc) from [<c01f8e9c>] (Ldiv0+0x8/0x10)
[    0.937435] regulator: VDD_M15OFF: 1500 mV
[    0.942869] regulator: VDD_33OFF_EXT3: 3300 mV
[    0.946932] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.951347] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    0.956353] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
[    0.962630] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.967593] s3c-i2c s3c2440-i2c.2: slave address 0x10
[    0.972578] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[    0.978519] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.983812] s3c-i2c s3c2440-i2c.3: slave address 0x10
[    0.988809] s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz
[    0.994750] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[    1.000042] s3c-i2c s3c2440-i2c.4: slave address 0x10
[    1.005040] s3c-i2c s3c2440-i2c.4: bus frequency set to 97 KHz
[    1.010981] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
[    1.016266] s3c-i2c s3c2440-i2c.5: slave address 0x10
[    1.021272] s3c-i2c s3c2440-i2c.5: bus frequency set to 97 KHz
[    1.027212] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
[    1.032496] s3c-i2c s3c2440-i2c.6: slave address 0x10
[    1.037504] s3c-i2c s3c2440-i2c.6: bus frequency set to 97 KHz
[    1.043452] s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
[    1.048729] s3c-i2c s3c2440-i2c.7: slave address 0x10
[    1.053736] s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz
[    1.059678] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[    1.065637] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    1.071767] Bluetooth: Core ver 2.15
[    1.074896] NET: Registered protocol family 31
[    1.079258] Bluetooth: HCI device and connection manager initialized
[    1.085588] Bluetooth: HCI socket layer initialized
[    1.090464] Switching to clocksource mct-frc
[    1.104504] NET: Registered protocol family 2
[    1.107462] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[    1.114493] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.122030] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[    1.128671] TCP: Hash tables configured (established 32768 bind 32768)
[    1.134655] TCP reno registered
[    1.137782] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.143708] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.150153] NET: Registered protocol family 1
[    1.154568] RPC: Registered udp transport module.
[    1.159049] RPC: Registered tcp transport module.
[    1.163732] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.170272] Trying to unpack rootfs image as initramfs...
[    1.176021] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    1.208263] Freeing initrd memory: 6240K
[    1.211063] PMU: registered new PMU device of type 0
[    1.216606] Loaded driver for PL330 DMAC-1 s3c-pl330
[    1.220605]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.226875] Loaded driver for PL330 DMAC-2 s3c-pl330
[    1.231742]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.244282] ashmem: initialized
[    1.246500] ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.250228] msgmni has been set to 854
[    1.254350] alg: No test for stdrng (krng)
[    1.258073] io scheduler noop registered
[    1.261931] io scheduler deadline registered
[    1.266191] io scheduler cfq registered (default)
[    1.285238] Console: switching to colour frame buffer device 128x37
[    1.299727] FIMD src sclk = 133333333
[    1.302758] s3cfb s3cfb.0: registered successfully
[    1.412801] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.419025] s5pv210-uart.0: s3c2410_serial0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
[    1.426152] s5pv210-uart.1: s3c2410_serial1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
[    1.434286] s5pv210-uart.2: s3c2410_serial2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
[    1.442447] s5pv210-uart.3: s3c2410_serial3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
[    1.450592] s5pv210-uart.4: s3c2410_serial4 at MMIO 0x13840000 (irq = 320) is a S3C6400/10
[    1.459593] brd: module loaded
[    1.464203] loop: module loaded
[    1.465915] pmem: 0 init
[    1.469934] pmem_gpu1: 0 init
[    1.472038] at24 0-0050: 16384 byte 24c128 EEPROM (writable)
[    1.477111] at24 0-0052: 16384 byte 24c128 EEPROM (writable)
[    1.484830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.490026] s5p-ehci s5p-ehci: s5pv210 EHCI
[    1.494102] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    1.501187] s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
[    1.515995] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    1.519967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.526708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.533908] usb usb1: Product: s5pv210 EHCI
[    1.538072] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
[    1.543627] usb usb1: SerialNumber: s5pv210
[    1.548308] hub 1-0:1.0: USB hub found
[    1.551540] hub 1-0:1.0: 3 ports detected
[    1.555827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.561733] [usb_host_phy_init]Already power on PHY
[    1.566558] s5p-ohci s5p-ohci: s5pv210 OHCI
[    1.570723] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[    1.577758] s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
[    1.638805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.644131] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.651333] usb usb2: Product: s5pv210 OHCI
[    1.655480] usb usb2: Manufacturer: Linux 2.6.35.7 ohci_hcd
[    1.661060] usb usb2: SerialNumber: s5pv210
[    1.665694] hub 2-0:1.0: USB hub found
[    1.668961] hub 2-0:1.0: 3 ports detected
[    1.673268] Initializing USB Mass Storage driver...
[    1.677974] usbcore: registered new interface driver usb-storage
[    1.683794] USB Mass Storage support registered.
[    1.688515] usbcore: registered new interface driver ums-alauda
[    1.694411] usbcore: registered new interface driver ums-cypress
[    1.700397] usbcore: registered new interface driver ums-datafab
[    1.706385] usbcore: registered new interface driver ums-freecom
[    1.712373] usbcore: registered new interface driver ums-isd200
[    1.718275] usbcore: registered new interface driver ums-jumpshot
[    1.724351] usbcore: registered new interface driver ums-sddr09
[    1.730255] usbcore: registered new interface driver ums-sddr55
[    1.736157] usbcore: registered new interface driver ums-usbat
[    1.742027] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
[    1.742034] s3c-udc : version 15 March 2009 (DMA Mode)
[    1.754855] g_ether gadget: using random self ethernet address
[    1.760536] g_ether gadget: using random host ethernet address
[    1.766733] usb0: MAC 42:b0:c2:fc:39:4c
[    1.770143] usb0: HOST MAC 26:d9:34:0a:9b:91
[    1.774692] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    1.781230] g_ether gadget: g_ether ready
[    1.784987] Registered gadget driver 'g_ether'
[    1.790989] input: insignal-keypad as /devices/virtual/input/input0
[    1.796156] wake enabled for irq 337
[    1.799334] !!!!! s3c_irqwake_eintmask = 0xffffdfff !!!!!
[    1.804715] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    1.810066] wake enabled for irq 338
[    1.813568] !!!!! s3c_irqwake_eintmask = 0xffff9fff !!!!!
[    1.818950] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    1.824301] wake enabled for irq 339
[    1.827803] !!!!! s3c_irqwake_eintmask = 0xffff1fff !!!!!
[    1.833185] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    1.838530] wake enabled for irq 340
[    1.842038] !!!!! s3c_irqwake_eintmask = 0xfffe1fff !!!!!
[    1.847420] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    1.852767] wake enabled for irq 341
[    1.856274] !!!!! s3c_irqwake_eintmask = 0xfffc1fff !!!!!
[    1.861655] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    1.866970] insignal-keypad insignal-keypad.0: insignal keypad input driver Initialized!!
[    1.875503] input: unidisplay_ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0041/input/input1
[    1.884591] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[    1.889084] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    1.894866] using rtc device, s3c, for alarms
[    1.898672] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    1.905018] i2c /dev entries driver
[    1.910103] Linux video capture interface: v2.00
[    1.913462] Initialize JPEG driver
[    1.917044] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[    1.923177] S5P HPD Driver, (c) 2009 Samsung Electronics
[    1.928766] S5P CEC Driver, (c) 2009 Samsung Electronics
[    1.934313] sysmmu_set_tablebase: CP15 TTBR0 : 0x40004000
[    1.939041] sysmmu_set_tablebase: SYSMMU_G2D sysmmuconp->regs + S5P_PT_BASE_ADDR:0xE89A0014
[    1.947375] sysmmu_on:SYSMMU_G2D sysmmuconp->regs + S5P_MMU_CTRL:0xE89A0000, reg:0x5
[    1.955603] MFC(Multi Function Codec - FIMV v5.x) registered successfully
[    1.962291] Mali: init_mali_clock mali_clock c059fc4c
[    1.970557] Mali: Mali device driver  loaded
[    1.973341] s3c_bat_init
[    1.975914] sec-fake-battery sec-fake-battery: s3c_bat_probe
[    1.982394] Add ewtsa i2c driver
[    1.984912] device-mapper: uevent: version 1.0.3
[    1.989582] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[    2.004796] device-mapper: multipath: version 1.1.1 loaded
[    2.008808] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.015415] Bluetooth: Virtual HCI driver ver 1.3
[    2.020211] Bluetooth: HCI UART driver ver 2.2
[    2.024424] Bluetooth: HCI H4 protocol initialized
[    2.029226] Bluetooth: HCI BCSP protocol initialized
[    2.034164] Bluetooth: HCILL protocol initialized
[    2.040049] cpuidle: using governor ladder
[    2.043418] cpuidle: using governor menu
[    2.046940] sdhci: Secure Digital Host Controller Interface driver
[    2.052999] sdhci: Copyright(c) Pierre Ossman
[    2.057444] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (88888888 Hz)
[    2.064154] mmc0: no vmmc regulator found
[    2.069274] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    2.075182] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (88888888 Hz)
[    2.081939] mmc1: no vmmc regulator found
[    2.088032] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[    2.093659] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
[    2.100421] mmc2: no vmmc regulator found
[    2.106120] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    2.111735] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (88888888 Hz)
[    2.118500] mmc3: no vmmc regulator found
[    2.123593] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    2.130038] usbcore: registered new interface driver usbhid
[    2.135051] usbhid: USB HID core driver
[    2.140313] logger: created 64K log 'log_main'
[    2.143462] logger: created 256K log 'log_events'
[    2.148188] logger: created 64K log 'log_radio'
[    2.152686] logger: created 64K log 'log_system'
[    2.157700] No device for DAI RT5625 HiFi
[    2.161102] No device for DAI RT5625 Voice
[    2.165528] RT5625 Audio Codec 0.03 alsa 1.0.23rt5625_probe: 1
[    2.170992] rt5625_probe: 2
[    2.173759] rt5625_probe: 3
[    2.176573] rt5625_add_i2c_device: 1
[    2.181548] asoc: RT5625 HiFi <-> s3c64xx-i2s-v4 mapping ok
[    2.209706] mmc2: new high speed SDHC card at address b368
[    2.214001] mmcblk0: mmc2:b368 NCard 3.73 GiB
[    2.218313]  mmcblk0: p1 p2 p3 p4
[    2.221783] g_ether gadget: high speed config #1: CDC Ethernet (ECM)
[    2.238076] rt5625: initial ok
[    2.239796] rt5625_add_i2c_device: 2
[    2.247335] ALSA device list:
[    2.248819]   #0: origen (RT5625)
[    2.252187] TCP cubic registered
[    2.255350] NET: Registered protocol family 17
[    2.259875] Bluetooth: L2CAP ver 2.14
[    2.263400] Bluetooth: L2CAP socket layer initialized
[    2.268497] Bluetooth: SCO (Voice Link) ver 0.6
[    2.272983] Bluetooth: SCO socket layer initialized
[    2.277924] Bluetooth: RFCOMM TTY layer initialized
[    2.282701] Bluetooth: RFCOMM socket layer initialized
[    2.287811] Bluetooth: RFCOMM ver 1.11
[    2.291543] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.296837] Bluetooth: BNEP filters: protocol multicast
[    2.302046] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.308081] ++ s5pv310_cpufreq_init
[    2.311497] -- s5pv310_cpufreq_init
[    2.316126] SMDKV310 Button init function
[    2.318877] wake enabled for irq 355
[    2.322425] !!!!! s3c_irqwake_eintmask = 0x7ffc1fff !!!!!
[    2.327806] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[    2.333127] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
[    2.341663] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[    2.349264] ctrl->mem.size = 0x384000
[    2.352826] ctrl->mem.base = 0x5cf80000
[    2.357006] FIMC0 registered successfully
[    2.369778] ctrl->mem.size = 0x900000
[    2.371952] ctrl->mem.base = 0x5d304000
[    2.376041] FIMC1 registered successfully
[    2.389772] ctrl->mem.size = 0x1800000
[    2.392038] ctrl->mem.base = 0x5dc04000
[    2.396087] FIMC2 registered successfully
[    2.409771] ctrl->mem.size = 0x300000
[    2.411950] ctrl->mem.base = 0x5f404000
[    2.416004] FIMC3 registered successfully
[    2.430249] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[    2.582835] RAMDISK: gzip image found at block 0
[    3.383533] VFS: Mounted root (ext2 filesystem) on device 1:0.
INIT: version 2.84 booting
INIT: Entering runlevel: 3


Linux 2.6.35.7-Origen(by InSignal Co., Ltd.)

 /) /)
(='.'=)

login[1216]: root login on 's3c2410_serial2'
root@godori:~#

"사람은 자기가 보고 싶은 현실만 볼 뿐이다." - Gaius Julius Caesar
엮인글 :
http://www.aesop.or.kr/index.php?mid=Board_Community_Freeboard&document_srl=12673&act=trackback&key=53e

고도리

2011.11.17 02:16:47
*.200.239.234

ToolChain spec입니다.


root@godori:~/soc/v310# arm-unknown-linux-gnueabi-gcc -v
Using built-in specs.
Target: arm-unknown-linux-gnueabi
Configured with: /home/ghcstop/ct/crosstool-ng-1.12.0/.build/src/gcc-4.4.6/configure --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu --target=arm-unknown-linux-gnueabi --prefix=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi --with-sysroot=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --enable-languages=c,c++ --disable-multilib --with-pkgversion='crosstool-NG 1.12.0' --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-mpfr=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-ppl=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-cloog=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --enable-threads=posix --enable-target-optspace --with-local-prefix=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --disable-nls --enable-c99 --enable-long-long
Thread model: posix
gcc version 4.4.6 (crosstool-NG 1.12.0)

List of Articles
번호 제목 글쓴이 날짜 조회 수sort
공지 교육 홍보 및 광고는 "교육 및 세미나 홍보" 게시판을 이용해 ... 관리자 2010-07-15 107989

[개발] UBI/UbiFS/Ubiblk 을 MLC nand에 올렸습니다. [4]

[Origen보드] 새로운 툴체인/RootFS/ramdisk 테스트 [1]

ODROID-T를 받으면 해보고 싶은 것. [4]

[ODROID-S] 구동 동영상 및 부팅 로그 [17]

단축url url단축 링크줄이기 주소줄이기 링크주소줄이기 짧은링크...

[ArndaleBoard] Exynos5250 slackware for arm boot log

Ubuntu 9.10 에서 Android 및 Odroid 개발 가능 [8]

kernel 2.6.29 android 부팅로그 (aesop-6410) [5]

ODROID Eclair 2.1 포팅 중간 결과~~ file [7]

S5PC110 보드 구동 사진 file [51]

AESOP-6410 - 리눅스 최종 배포본 사진 file [3]

갤럭시 S2 폰의 프레임버퍼를 삼성 MFC 코덱으로 처리한 결과... file

[참고] aesop-6410 2.6.29-android kernel sound테스트까지 했습... [2]

드디여 사이트가 오픈 했습니다...^^

Samsung Application Processor S5PC110/S5PV210 [11]

Android Gstreamer빌드중.. external/webkit/JavaScriptCore/run... [1]

  • 2009-08-15
  • 조회 수 16410

Cortex A8 보드 제작 [17]

[정보] aesop-6410 kernel 2.6.28 기본 포팅 완료 [1]

[개발] S3C6400용 커널 sound/fb까지 확인했습니다 [4]

사용자 로그인