회원 및 비회원 모두 열람이 가능합니다. 최대 업로드 가능한 용량은 20MB 입니다.
글 수 1,910
근래, 여러가지 드라이버들을 업데이트 할 일들이 있어서 콘솔 모드로 작업 중에 있습니다.
그러다라 여러 application package들이 예전 버전이라 버그나 여러가지 문제가 있어서
고민을 하다가 유형목님께 부탁해서 root filesystem을 요청했더니...
거의 2.4Gbytes짜리 거대한 Slackware arm 버전을 주시네요.
돌려본 결과로는 훌륭합니다.
아직, LCD는 없이 동작시키고 없는데(제가 LCD없고 touch도 망가진 보드를 사용중이라)
ssh로도 접속되고 하니 쓸만합니다.
그리고, 더 좋은 것은 native compiler가 있어서 이만큼 좋은게 없네요.
그냥
./configure --prefix=/usr
make
make install
하니 아주 편합니다....ㅎㅎ
시간나는대로 X-windows도 올려보고, Xorg용 가속기 코드까지 올려보고 싶습니다만
이래저래 요즘은 시간이 안나네요....맨날 일하는데도요...ㅠ.ㅠ
여하튼.......로그 보시면 대략 아실테니 로그 올립니다.
=========================================================================
U-Boot 2010.12 (Mar 04 2013 - 01:45:42) for Insignal ORIGEN
CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1000MHz, MPLL = 800MHz
DRAM: 1023 MiB
TrustZone Enabled BSP
BL1 version: 20121128
Checking Boot Mode ... EMMC4.41
REVISION: 1.1
MMC Device 0: 3816 MB
MMC Device 1: 0 MB
MMC Device 2 not found
Hit any key to stop autoboot: 0
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x40008000, Download Filesize:0x39eda0
Checksum is being calculated....
Checksum O.K.
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-rc6 (root@godori) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #78 SMP PREEMPT Sun Dec 22 16:57:00 KST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ORIGEN_QUAD
[ 0.000000] Truncating RAM at 60000000-6fffffff to -6f7fffff (vmalloc region overlap).
[ 0.000000] Ignoring RAM at 70000000-7fefffff (vmalloc region overlap).
[ 0.000000] cma: CMA: reserved 16 MiB at 6e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412211)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000
[ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_jpeg: source is mout_jpeg0 (0), rate is 50000000
[ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 200000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 50000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0e3b000 s11392 r8192 d13184 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 184848
[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.199:/hdd/nwork/18.5420-slackware/03.slack-14.0-arm-all-root/rfs_14.0 ip=192.168.0.101:192.168.0.199:192.168.0.1:255.255.255.0::eth0:off console=ttySAC2,115200n81 hwaddr=00:01:3f:00:00:10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 713528k/713528k available, 64712k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0712670 (7210 kB)
[ 0.000000] .init : 0xc0713000 - 0xc075ac80 ( 288 kB)
[ 0.000000] .data : 0xc075c000 - 0xc07cd628 ( 454 kB)
[ 0.000000] .bss : 0xc07cd64c - 0xc0840ae0 ( 462 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] Initializing cgroup subsys cpuacct
[ 0.045000] Initializing cgroup subsys freezer
[ 0.045000] ftrace: allocating 19450 entries in 58 pages
[ 0.065000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.065000] Setting up static identity map for 0x4051a270 - 0x4051a2c8
[ 0.065000] L310 cache controller enabled
[ 0.065000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.115000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.155000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.195000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.195000] Brought up 4 CPUs
[ 0.195000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[ 0.195000] devtmpfs: initialized
[ 0.200000] dummy:
[ 0.200000] NET: Registered protocol family 16
[ 0.210000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.215000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.215000] EXYNOS4x12 PMU Initialize
[ 0.220000] EXYNOS: Initializing architecture
[ 0.220000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.240000] bio: create slab <bio-0> at 0
[ 0.240000] exynos_ion_heap_create: 34
[ 0.240000] exynos_ion_heap_create: 34
[ 0.240000] exynos_ion_heap_create: 34
[ 0.240000] SCSI subsystem initialized
[ 0.240000] usbcore: registered new interface driver usbfs
[ 0.240000] usbcore: registered new interface driver hub
[ 0.245000] usbcore: registered new device driver usb
[ 0.245000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.245000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
[ 0.355000] vdd_mif range: 800 <--> 1100 mV at 1100 mV
[ 0.370000] vdd_arm range: 800 <--> 1350 mV at 1200 mV
[ 0.385000] vdd_int range: 800 <--> 1150 mV at 1000 mV
[ 0.400000] vdd_g3d range: 850 <--> 1200 mV at 1100 mV
[ 0.415000] vdd_ldo8 range: 1000 mV
[ 0.430000] vdd_lcd fixed: 3300 mV
[ 0.445000] vdd_ldo10 range: 1800 mV
[ 0.465000] vdd_ldo12 range: 3000 <--> 3300 mV at 3000 mV
[ 0.480000] vdd_ldo15 range: 1000 mV
[ 0.490000] vddioperi_28: 2800 mV
[ 0.495000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.495000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.495000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
[ 0.495000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.495000] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.495000] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[ 0.495000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.495000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.495000] s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz
[ 0.495000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.495000] s3c-i2c s3c2440-i2c.6: slave address 0x10
[ 0.495000] s3c-i2c s3c2440-i2c.6: bus frequency set to 97 KHz
[ 0.495000] s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
[ 0.495000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.495000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[ 0.495000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.495000] Linux media interface: v0.10
[ 0.495000] Linux video capture interface: v2.00
[ 0.495000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.495000] Switching to clocksource mct-frc
[ 0.520000] NET: Registered protocol family 2
[ 0.520000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.520000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[ 0.525000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.525000] TCP: reno registered
[ 0.525000] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.525000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.525000] NET: Registered protocol family 1
[ 0.525000] RPC: Registered named UNIX socket transport module.
[ 0.525000] RPC: Registered udp transport module.
[ 0.525000] RPC: Registered tcp transport module.
[ 0.525000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.525000] Attached IOMMU controller to exynos4-fimc.0 device.
[ 0.525000] Attached IOMMU controller to exynos4-fimc.1 device.
[ 0.525000] Attached IOMMU controller to exynos4-fimc.2 device.
[ 0.525000] Attached IOMMU controller to exynos4-fimc.3 device.
[ 0.525000] Attached IOMMU controller to s5p-mfc-l device.
[ 0.525000] Attached IOMMU controller to s5p-mfc-r device.
[ 0.525000] Attached IOMMU controller to s5p-mixer device.
[ 0.525000] Attached IOMMU controller to s5p-fimg2d device.
[ 0.525000] Failed to declare coherent memory for MFC device (0 bytes at 0x43000000)
[ 0.540000] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.540000] fuse init (API version 7.19)
[ 0.540000] msgmni has been set to 1425
[ 0.540000] io scheduler noop registered
[ 0.540000] io scheduler deadline registered
[ 0.540000] io scheduler cfq registered (default)
[ 0.540000] start plist test
[ 0.545000] end plist test
[ 0.560000] s3c-fb exynos4-fb.0: window 0: fb
[ 0.575000] s3c-fb exynos4-fb.0: window 1: fb
[ 0.590000] s3c-fb exynos4-fb.0: window 2: fb
[ 0.605000] s3c-fb exynos4-fb.0: window 3: fb
[ 0.620000] s3c-fb exynos4-fb.0: window 4: fb
[ 0.630000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.630000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.635000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.635000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.735000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.735000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 0.735000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 0.735000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 1.620000] console [ttySAC2] enabled
[ 1.620000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 1.635000] Mali: init_mali_clock mali_clock c0787648
[ 1.640000] Mali: Mali device driver loaded
[ 1.650000] brd: module loaded
[ 1.660000] loop: module loaded
[ 1.660000] usbcore: registered new interface driver asix
[ 1.665000] usbcore: registered new interface driver cdc_ether
[ 1.670000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.680000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.685000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.690000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 1.705000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.705000] hub 1-0:1.0: USB hub found
[ 1.710000] hub 1-0:1.0: 3 ports detected
[ 1.715000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.720000] exynos-ohci exynos-ohci: PHY already ON
[ 1.725000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 1.730000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 1.740000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 1.800000] hub 2-0:1.0: USB hub found
[ 1.805000] hub 2-0:1.0: 3 ports detected
[ 1.810000] Initializing USB Mass Storage driver...
[ 1.815000] usbcore: registered new interface driver usb-storage
[ 1.820000] USB Mass Storage support registered.
[ 1.825000] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
[ 1.830000] s3c-hsotg s3c-hsotg: PHY already ON
[ 1.835000] s3c-hsotg s3c-hsotg: EPs:15
[ 1.835000] s3c-hsotg s3c-hsotg: dedicated fifos
[ 1.845000] s3c-hsotg s3c-hsotg: still being used
[ 1.845000] file system registered
[ 1.850000] gadget: Mass Storage Function, version: 2009/09/11
[ 1.855000] gadget: Number of LUNs=1
[ 1.860000] lun0: LUN: removable file: (no medium)
[ 1.865000] gadget: android_usb ready
[ 1.870000] s3c-hsotg s3c-hsotg: bound driver android_usb
[ 1.875000] s3c-hsotg s3c-hsotg: PHY already ON
[ 1.880000] s3c-hsotg s3c-hsotg: still being used
[ 1.885000] mousedev: PS/2 mouse device common for all mice
[ 1.890000] input: samsung-keypad as /devices/platform/samsung-keypad/input/input0
[ 1.900000] input: unidisplay_ts as /devices/platform/s3c2440-i2c.3/i2c-3/3-0041/input/input1
[ 1.905000] Unidisplay touch driver registered successfully
[ 1.915000] wake enabled for irq 439
[ 1.915000] GPIO Input Driver: Start gpio inputs for origen-keypad in interrupt mode
[ 1.925000] input: origen-keypad as /devices/virtual/input/input2
[ 1.930000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 1.935000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.940000] s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it
[ 1.950000] i2c /dev entries driver
[ 1.955000] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[ 1.960000] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[ 1.965000] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[ 1.970000] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[ 1.975000] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[ 1.980000] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[ 1.990000] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[ 1.995000] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[ 2.000000] exynos4-fimc-is driver not found, deffering probe
[ 2.005000] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[ 2.010000] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[ 2.020000] HDMI unplugged
[ 2.020000] s5p-hdmiphy 8-0038: probe successful
[ 2.025000] s5p-hdmi exynos4-hdmi: probe successful
[ 2.025000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 2.035000] i2c i2c-6: attached s5p_ddc into i2c adapter successfully
[ 2.045000] i2c-core: driver [s5p_ddc] using legacy suspend method
[ 2.050000] i2c-core: driver [s5p_ddc] using legacy resume method
[ 2.055000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 2.060000] s5p-mixer s5p-mixer: probe start
[ 2.065000] s5p-mixer s5p-mixer: resources acquired
[ 2.070000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 2.080000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 2.085000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video10
[ 2.090000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video11
[ 2.100000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video12
[ 2.105000] s5p-mixer s5p-mixer: probe successful
[ 2.110000] Initialize JPEG driver
[ 2.115000] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
[ 2.120000] [fimg2d_probe] base address: 0x10800000
[ 2.125000] [fimg2d_probe] irq: 121
[ 2.130000] [fimg2d_clk_setup] parent clk: mout_g2d0
[ 2.135000] [fimg2d_clk_setup] sclk: sclk_fimg2d
[ 2.135000] [fimg2d_clk_setup] clkrate: 200000000 parent clkrate: 800000000
[ 2.145000] [fimg2d_clk_setup] gate clk: fimg2d
[ 2.150000] [fimg2d_probe] enable runtime pm
[ 2.155000] [fimg2d_probe] sysmmu disabled for fimg2d
[ 2.160000] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
[ 2.165000] hub 1-2:1.0: USB hub found
[ 2.165000] hub 1-2:1.0: 3 ports detected
[ 2.175000] Exynos: Kernel Thermal management registered
[ 2.180000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.185000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
[ 2.195000] cpuidle: using governor ladder
[ 2.195000] cpuidle: using governor menu
[ 2.200000] sdhci: Secure Digital Host Controller Interface driver
[ 2.205000] sdhci: Copyright(c) Pierre Ossman
[ 2.210000] Synopsys Designware Multimedia Card Interface Driver
[ 2.220000] dw_mmc dw_mmc: Using internal DMA controller.
[ 2.225000] mmc0: no vmmc regulator found
[ 2.255000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.260000] dw_mmc dw_mmc: Version ID is 240a
[ 2.265000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[ 2.275000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
[ 2.280000] Registered chained gpio int handler for interrupt 78.
[ 2.285000] Registered interrupt support for gpio group 22.
[ 2.295000] mmc1: no vmmc regulator found
[ 2.300000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 2.310000] mmc0: new high speed MMC card at address 0001
[ 2.315000] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB
[ 2.320000] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB
[ 2.325000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 2.335000] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB
[ 2.335000] usbcore: registered new interface driver usbhid
[ 2.335000] usbhid: USB HID core driver
[ 2.350000] ashmem: initialized
[ 2.350000] mmcblk0: p1 p2 p3 p4
[ 2.355000] logger: created 256K log 'log_main'
[ 2.360000] logger: created 256K log 'log_events'
[ 2.360000] mmcblk0boot1: unknown partition table
[ 2.360000] mmcblk0boot0: unknown partition table
[ 2.375000] logger: created 256K log 'log_radio'
[ 2.380000] logger: created 256K log 'log_system'
[ 2.385000] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[ 2.390000] audss_init: RCLK SRC[busclk]
[ 2.395000] snd_soc_instantiate_card: call ==> soc_bind_dai_link(card, 0)
[ 2.400000] soc_bind_dai_link: binding rt5631_playback at idx 0
[ 2.405000] soc_bind_dai_link: cpu_dai->name = samsung-i2s.4, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.415000] soc_bind_dai_link: cpu_dai->name = samsung-i2s.0, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.425000] soc_bind_dai_link: cpu_dai->name = rt5631-voice, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.435000] soc_bind_dai_link: cpu_dai->name = rt5631-hifi, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.445000] soc_bind_dai_link: cpu_dai->name = snd-soc-dummy-dai, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.450000] usb 1-2.2: new high-speed USB device number 3 using s5p-ehci
[ 2.460000] soc_bind_dai_link: codec->name = rt5631.1-001a, dai_link->codec_name = rt5631.1-001a
[ 2.470000] soc_bind_dai_link: codec->name = snd-soc-dummy, dai_link->codec_name = rt5631.1-001a
[ 2.475000] snd_soc_instantiate_card: soc_bind_dai_link return value = 0
[ 2.485000] snd_soc_instantiate_card: call ==> soc_bind_dai_link(card, 1)
[ 2.490000] soc_bind_dai_link: binding rt5631_capture at idx 1
[ 2.495000] soc_bind_dai_link: cpu_dai->name = samsung-i2s.4, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.505000] soc_bind_dai_link: cpu_dai->name = samsung-i2s.0, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.515000] soc_bind_dai_link: cpu_dai->name = rt5631-voice, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.525000] soc_bind_dai_link: cpu_dai->name = rt5631-hifi, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.530000] soc_bind_dai_link: cpu_dai->name = snd-soc-dummy-dai, dai_link->cpu_dai_name = samsung-i2s.0
[ 2.540000] soc_bind_dai_link: codec->name = rt5631.1-001a, dai_link->codec_name = rt5631.1-001a
[ 2.550000] soc_bind_dai_link: codec->name = snd-soc-dummy, dai_link->codec_name = rt5631.1-001a
[ 2.560000] snd_soc_instantiate_card: soc_bind_dai_link return value = 0
[ 2.565000] Codec driver version 0.1.0 alsa 1.0.25
[ 2.570000] hub 1-2.2:1.0: USB hub found
[ 2.570000] hub 1-2.2:1.0: 4 ports detected
[ 2.680000] rt5631_init: 1
[ 2.685000] asoc: rt5631-hifi <-> samsung-i2s.0 mapping ok
[ 2.685000] rt5631_init: 1
[ 2.690000] asoc: rt5631-hifi <-> samsung-i2s.0 mapping ok
[ 2.695000] rt5631-dai: register card rt5631-hifi -> samsung-i2s.0
[ 2.700000] GACT probability NOT on
[ 2.705000] Mirror/redirect action on
[ 2.710000] u32 classifier
[ 2.710000] Actions configured
[ 2.715000] Netfilter messages via NETLINK v0.30.
[ 2.720000] nf_conntrack version 0.5.0 (11404 buckets, 45616 max)
[ 2.725000] ctnetlink v0.93: registering with nfnetlink.
[ 2.730000] xt_time: kernel timezone is -0000
[ 2.735000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.740000] arp_tables: (C) 2002 David S. Miller
[ 2.745000] TCP: cubic registered
[ 2.750000] Initializing XFRM netlink socket
[ 2.755000] NET: Registered protocol family 10
[ 2.760000] mip6: Mobile IPv6
[ 2.760000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.765000] sit: IPv6 over IPv4 tunneling driver
[ 2.770000] NET: Registered protocol family 17
[ 2.775000] NET: Registered protocol family 15
[ 2.780000] NET: Registered protocol family 4
[ 2.785000] NET: Registered protocol family 35
[ 2.790000] EXYNOS4X12: Adaptive Support Voltage init
[ 2.795000] EXYNOS4X12(SG): ORIG : 6 MOD : 0 RESULT : 6
[ 2.800000] EXYNOS: Fail to get HPM Value
[ 2.800000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.810000] Registering SWP/SWPB emulation handler
[ 2.815000] DVFS : VDD_INT Voltage table set with 0 Group
[ 2.860000] vddioperi_28: incomplete constraints, leaving on
[ 2.865000] usb 1-2.2.4: new high-speed USB device number 4 using s5p-ehci
[ 2.870000] vdd_lcd fixed: incomplete constraints, leaving on
[ 2.875000] vdd_ldo8 range: incomplete constraints, leaving on
[ 2.880000] vdd_arm range: incomplete constraints, leaving on
[ 2.885000] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.285000] asix 1-2.2.4:1.0: eth0: register 'asix' at usb-s5p-ehci-2.2.4, ASIX AX88772 USB 2.0 Ethernet, 00:01:3f:00:00:10
[ 4.695000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.435000] asix 1-2.2.4:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 6.445000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.465000] IP-Config: Complete:
[ 6.465000] device=eth0, addr=192.168.0.101, mask=255.255.255.0, gw=192.168.0.1
[ 6.475000] host=192.168.0.101, domain=, nis-domain=(none)
[ 6.480000] bootserver=192.168.0.199, rootserver=192.168.0.199, rootpath=
[ 6.485000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPLUG
[ 6.495000] ALSA device list:
[ 6.495000] #0: origen-rt5631q
[ 6.510000] VFS: Mounted root (nfs filesystem) on device 0:11.
[ 6.515000] devtmpfs: mounted
[ 6.515000] Freeing init memory: 284K
INIT: version 2.88 booting
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /run type tmpfs (rw,mode=0755)
Starting udevd: /sbin/udevd --daemon
[ 7.240000] udevd[1419]: starting version 182
Triggering udev events: /sbin/udevadm trigger --action=add
Fuse filesystem already available.
Mounting fuse control filesystem.
Setting system time from the hardware clock (localtime): Sat Jan 1 00:00:06 KST 2000
Testing root filesystem status: read-write filesystem
*** ERROR: Root partition has already been mounted read-write. Cannot check!
For filesystem checking to work properly, your system must initially mount
the root partition as read only. Please modify your kernel with 'rdev' so that
it does this. If you're booting with LILO, add a line:
read-only
to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it.
If you boot from a kernel on a floppy disk, put it in the drive and type:
rdev -R /dev/fd0 1
If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag.
This will fix the problem *AND* eliminate this annoying message. :^)
Press ENTER to continue. mount: can't find / in /etc/fstab or /etc/mtab
Checking non-root filesystems:
fsck from util-linux 2.21.2
Mounting non-root local filesystems:
nothing was mounted
Using /etc/random-seed to initialize /dev/urandom.
INIT: Entering runlevel: 3
Going multiuser...
Updating shared library links: /sbin/ldconfig &
setterm: cannot (un)set powersave mode: Invalid argument
Starting sysklogd daemons: /usr/sbin/syslogd /usr/sbin/klogd -c 3 -x
Updating X font indexes: /usr/bin/fc-cache -f &
Triggering udev events: /sbin/udevadm trigger --action=change
Starting RPC portmapper: /sbin/rpc.portmap
Starting RPC NSM (Network Status Monitor): /sbin/rpc.statd
Starting OpenSSH SSH daemon: /usr/sbin/sshd
Starting system message bus: /usr/bin/dbus-uuidgen --ensure ; /usr/bin/dbus-daemon --system
Updating gtk.immodules for arm-slackware-linux-gnueabi:
/usr/bin/gtk-query-immodules-2.0-32 --update-cache
Updating gtk.immodules for arm-slackware-linux-gnueabi:
/usr/bin/gtk-query-immodules-3.0-32 --update-cache
Updating gdk-pixbuf.loaders for arm-slackware-linux-gnueabi:
/usr/bin/gdk-pixbuf-query-loaders-32 --update-cache
Updating pango.modules for arm-slackware-linux-gnueabi:
/usr/bin/pango-querymodules-32 \
> /etc/pango/arm-slackware-linux-gnueabi/pango.modules
/usr/bin/pango-querymodules-32: error while loading shared libraries: libharfbuzz.so.0: cannot open shared object file: No such file or directory
Loading /usr/share/kbd/keymaps/i386/qwerty/uk.map.gz
Welcome to Linux 3.5.0-rc6 (ttySAC2)
slackware login: root
Password:
Linux 3.5.0-rc6.
Last login: Sun Dec 22 15:31:23 +0900 2013 on /dev/ttySAC2.
You have mail.
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~# uname -a
Linux slackware 3.5.0-rc6 #78 SMP PREEMPT Sun Dec 22 16:57:00 KST 2013 armv7l ARMv7 Processor rev 0 (v7l) ORIGEN_QUAD GNU/Linux
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~# gcc -v
Reading specs from /usr/lib/gcc/arm-slackware-linux-gnueabi/4.8.2/specs
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/arm-slackware-linux-gnueabi/4.8.2/lto-wrapper
Target: arm-slackware-linux-gnueabi
Configured with: ../gcc-4.8.2/configure --with-arch=armv5te --with-float=soft --disable-werror --prefix=/usr --mandir=/usr/man --infodir=/usr/info --libdir=/usr/lib --enable-bootstrap --enable-checking=release --with-system-zlib --disable-libunwind-exceptions --with-python-dir=/lib/python2.7/site-packages --enable-shared --enable-languages=ada,c,c++,fortran,go,java,objc,lto --enable-objc-gc --enable-threads=posix --enable-__cxa_atexit --enable-libssp --enable-lto --with-gnu-ld --verbose --enable-java-home --with-java-home=/usr/lib/jvm/jre --with-jvm-root-dir=/usr/lib/jvm --with-jvm-jar-dir=/usr/lib/jvm/jvm-exports --with-arch-directory= --with-antlr-jar=/root/slackware64-current/source/d/gcc/antlr-runtime-3.4.jar --enable-java-awt=gtk --disable-gtktest --host=arm-slackware-linux-gnueabi --build=arm-slackware-linux-gnueabi --target=arm-slackware-linux-gnueabi
Thread model: posix
gcc version 4.8.2 (GCC)
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~# cat hello.c
#include <stdio.h>
int main(void)
{
printf("Hello Armed Slackware\n");
return 0;
}
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~# gcc -o hello hello.c
root@slackware:~#
root@slackware:~#
root@slackware:~# ./hello
Hello Armed Slackware
root@slackware:~#
root@slackware:~#
root@slackware:~#
root@slackware:~#
우왓! 어디 다녀온 사이에 생각지도 못한 소식이 있군요...
올해 연말은 아니더라도 구정전까지는 기대해볼만도....(부담되시려나)
그래도 고생해주시는덕에.. 감사할 따름입니다..............................T.T