회원 및 비회원 모두 열람이 가능합니다. 최대 업로드 가능한 용량은 20MB 입니다.
안녕하세요.
고도리입니다.
근래, 몇가지 처리할일이 있어서 새롭게 ARMv7-a/NEON 을 enable 시킨 툴체인과
이를 이용한 Root Filesystem/Ramdisk를 만들어 보았습니다.
대략 RAMDisk 크기는 25M 정도 되도록 구성하였고, 로그 보시면 아시겠지만
4초 정도면 부팅이 됩니다. 실제 조금 더 튜닝하면 3초 정도는 끊을 듯 합니다.
사이트 안정화 되는대로 올리도록 하겠습니다...^^
현재 Exynos4210(V310) 800Mhz에서 테스트한 것입니다.
===================================================================================
OK
U-Boot 2010.03 (Sep 25 2011 - 22:16:42) for ORIGEN Android
APLL = 800MHz, MPLL = 800MHz
Checking Boot Mode ...OMPIN : 3
SDMMC
PMIC: ARM 1.20V, INT 1.16V, G3D 1.11V
[I2C->ERR] Timeout Slave Address
[I2C->ERR] Timeout Slave Address
[I2C->ERR] Timeout Slave Address
Board: origen
DRAM: 1 GB
MMC: host->clock: 400000
host->clock: 50000000
3827 MB
host->clock: 400000
host->clock: 50000000
In: serial
Out: serial
Err: serial
Checking Boot Mode ...OMPIN : 3
SDMMC
board_late_init
Hit any key to stop autoboot: 0
ORIGEN #
ORIGEN #
ORIGEN # dnw 40008000
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x40008000, Download Filesize:0x301140
Checksum is being calculated....
Checksum O.K.
ORIGEN # dnw 48000000
Insert a OTG cable into the connector!
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x48000000, Download Filesize:0x618cf8
Checksum is being calculated.......
Checksum O.K.
ORIGEN # setenv bootargs root=/dev/ram0 rw rootfstype=ext2 console=ttySAC2,115200n81
ORIGEN # bootm 40008000 48000000
Boot with zImage
## Loading init Ramdisk from Legacy Image at 48000000 ...
Image Name: Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6393016 Bytes = 6.1 MB
Load Address: 41000000
Entry Point: 41000000
Starting kernel ...
U.compressing Lin
one, booting th[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.7 (root@godori) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #35 SMP PREEMPT Wed Nov 9 18:20:06 KST 2011
[ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: SMDKV310
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Truncating RAM at 60000000-7fffffff to -67ffffff (vmalloc region overlap).
[ 0.000000] CPU S5PV310 (id 0x43210010)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] mout_audss: bad source 0
[ 0.000000] S5PV310: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
[ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_sata: source is mout_mpll (0), rate is 133333333
[ 0.000000] sclk_spi: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_spi: source is mout_mpll (6), rate is 80000000
[ 0.000000] sclk_spi: source is xusbxti (1), rate is 24000000
[ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 200000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 133333333
[ 0.000000] sclk_pwi: source is xusbxti (1), rate is 12000000
[ 0.000000] mem infor: bank0 start-> 0x40000000, bank0 size-> 0x20000000
[ 0.000000] bank1 start-> 0x60000000, bank1 size-> 0x8000000
[ 0.000000] CMA reserve : fimg2d, addr is 0x5f800000, size is 0x800000
[ 0.000000] CMA reserve : jpeg, addr is 0x5f700000, size is 0x100000
[ 0.000000] CMA reserve : fimc3, addr is 0x5f400000, size is 0x300000
[ 0.000000] CMA reserve : fimc2, addr is 0x5dc00000, size is 0x1800000
[ 0.000000] CMA reserve : fimc1, addr is 0x5d300000, size is 0x900000
[ 0.000000] CMA reserve : fimc0, addr is 0x5cf7c000, size is 0x384000
[ 0.000000] CMA reserve : mfc1, addr is 0x5ab7c000, size is 0x2400000
[ 0.000000] CMA reserve : mfc0, addr is 0x5877c000, size is 0x2400000
[ 0.000000] CMA reserve : fimd, addr is 0x582cc000, size is 0x4b0000
[ 0.000000] CMA reserve : pmem_gpu1, addr is 0x578cc000, size is 0xa00000
[ 0.000000] CMA reserve : pmem, addr is 0x538cc000, size is 0x4000000
[ 0.000000] PERCPU: Embedded 7 pages/cpu @e0008000 s5888 r8192 d14592 u65536
[ 0.000000] pcpu-alloc: s5888 r8192 d14592 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162560
[ 0.000000] Kernel command line: root=/dev/ram0 rw rootfstype=ext2 console=ttySAC2,115200n81
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 512MB 128MB = 640MB total
[ 0.000000] Memory: 431380k/431380k available, 223980k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
[ 0.000000] .text : 0xc0032000 - 0xc056e000 (5360 kB)
[ 0.000000] .data : 0xc058e000 - 0xc05d4880 ( 283 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:396
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC2] enabled
[ 0.479749] Calibrating delay loop... 1595.80 BogoMIPS (lpj=3989504)
[ 0.591325] pid_max: default: 32768 minimum: 301
[ 0.596024] Mount-cache hash table entries: 512
[ 0.600818] Initializing cgroup subsys debug
[ 0.604683] Initializing cgroup subsys cpuacct
[ 0.609146] Initializing cgroup subsys freezer
[ 0.613570] CPU: Testing write buffer coherency: ok
[ 0.618576] L310 cache controller enabled
[ 0.622427] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache Size: 1048576 B
[ 0.635026] >made stopper
[ 0.645023] >made stopper
[ 0.655100] CPU1: Booted secondary processor
[ 0.655163] Brought up 2 CPUs
[ 0.660914] SMP: Total of 2 processors activated (3191.60 BogoMIPS).
[ 0.671966] regulator: core version 0.5
[ 0.674441] NET: Registered protocol family 16
[ 0.679597] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.685026] s3c_rtc_base: e8808000
[ 0.693325] S5PV310: Initializing architecture
[ 0.697033] samsung-pd samsung-pd.0: power domain registered
[ 0.702046] samsung-pd samsung-pd.1: power domain registered
[ 0.707654] samsung-pd samsung-pd.2: power domain registered
[ 0.713243] samsung-pd samsung-pd.3: power domain registered
[ 0.718886] samsung-pd samsung-pd.5: power domain registered
[ 0.724523] samsung-pd samsung-pd.6: power domain registered
[ 0.730168] samsung-pd samsung-pd.4: power domain registered
[ 0.736095] UMP: UMP device driver loaded
[ 0.753504] bio: create slab <bio-0> at 0
[ 0.766181] SCSI subsystem initialized
[ 0.768640] usbcore: registered new interface driver usbfs
[ 0.774166] usbcore: registered new interface driver hub
[ 0.779361] usbcore: registered new device driver usb
[ 0.784659] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.789294] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
[ 0.835053] regulator: VDD_33_ABB: 3300 mV
[ 0.839759] regulator: VDD_11ON: 1100 mV
[ 0.844294] regulator: VDD_11OFF: 1100 mV
[ 0.848918] regulator: VDD_18ON: 1800 mV
[ 0.853459] regulator: VDD_18OFF: 1800 mV
[ 0.858077] regulator: VDD_18AUD: 1800 mV
[ 0.862708] regulator: VDD_33OFF: 3300 mV
[ 0.867331] regulator: VDD_33ON: 3000 mV
[ 0.871870] regulator: VDD_11ON_PLL: 1100 mV
[ 0.876741] regulator: VDD_AUD: 3000 mV
[ 0.881185] regulator: AVDD18_SWB: 1800 mV
[ 0.885898] regulator: VDD_33ON_LAN: 3300 mV
[ 0.890777] regulator: VDD_33OFF_EXT1: 3300 mV
[ 0.895832] regulator: VDD33_SWB: 3300 mV
[ 0.900449] regulator: VDD_33OFF_EXT2: 3300 mV
[ 0.905508] regulator: VDD_MIF: 1200 mV
[ 0.909242] regulator: VDD_ARM: 775 <--> 1250 mV at 1250 mV
[ 0.914899] regulator: VDD_INT: 750 <--> 1100 mV at 1100 mV
[ 0.920530] regulator: VDD_G3D: 900 <--> 1200 mV at 1100 mV
[ 0.926173] Division by zero in kernel.
[ 0.928720] [<c003a318>] (unwind_backtrace+0x0/0xfc) from [<c01f8e9c>] (Ldiv0+0x8/0x10)
[ 0.937435] regulator: VDD_M15OFF: 1500 mV
[ 0.942869] regulator: VDD_33OFF_EXT3: 3300 mV
[ 0.946932] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.951347] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.956353] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
[ 0.962630] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.967593] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.972578] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[ 0.978519] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.983812] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.988809] s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz
[ 0.994750] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 1.000042] s3c-i2c s3c2440-i2c.4: slave address 0x10
[ 1.005040] s3c-i2c s3c2440-i2c.4: bus frequency set to 97 KHz
[ 1.010981] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
[ 1.016266] s3c-i2c s3c2440-i2c.5: slave address 0x10
[ 1.021272] s3c-i2c s3c2440-i2c.5: bus frequency set to 97 KHz
[ 1.027212] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
[ 1.032496] s3c-i2c s3c2440-i2c.6: slave address 0x10
[ 1.037504] s3c-i2c s3c2440-i2c.6: bus frequency set to 97 KHz
[ 1.043452] s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
[ 1.048729] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 1.053736] s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz
[ 1.059678] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 1.065637] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 1.071767] Bluetooth: Core ver 2.15
[ 1.074896] NET: Registered protocol family 31
[ 1.079258] Bluetooth: HCI device and connection manager initialized
[ 1.085588] Bluetooth: HCI socket layer initialized
[ 1.090464] Switching to clocksource mct-frc
[ 1.104504] NET: Registered protocol family 2
[ 1.107462] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.114493] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.122030] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[ 1.128671] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.134655] TCP reno registered
[ 1.137782] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.143708] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.150153] NET: Registered protocol family 1
[ 1.154568] RPC: Registered udp transport module.
[ 1.159049] RPC: Registered tcp transport module.
[ 1.163732] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.170272] Trying to unpack rootfs image as initramfs...
[ 1.176021] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 1.208263] Freeing initrd memory: 6240K
[ 1.211063] PMU: registered new PMU device of type 0
[ 1.216606] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 1.220605] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.226875] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 1.231742] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.244282] ashmem: initialized
[ 1.246500] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.250228] msgmni has been set to 854
[ 1.254350] alg: No test for stdrng (krng)
[ 1.258073] io scheduler noop registered
[ 1.261931] io scheduler deadline registered
[ 1.266191] io scheduler cfq registered (default)
[ 1.285238] Console: switching to colour frame buffer device 128x37
[ 1.299727] FIMD src sclk = 133333333
[ 1.302758] s3cfb s3cfb.0: registered successfully
[ 1.412801] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.419025] s5pv210-uart.0: s3c2410_serial0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
[ 1.426152] s5pv210-uart.1: s3c2410_serial1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
[ 1.434286] s5pv210-uart.2: s3c2410_serial2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
[ 1.442447] s5pv210-uart.3: s3c2410_serial3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
[ 1.450592] s5pv210-uart.4: s3c2410_serial4 at MMIO 0x13840000 (irq = 320) is a S3C6400/10
[ 1.459593] brd: module loaded
[ 1.464203] loop: module loaded
[ 1.465915] pmem: 0 init
[ 1.469934] pmem_gpu1: 0 init
[ 1.472038] at24 0-0050: 16384 byte 24c128 EEPROM (writable)
[ 1.477111] at24 0-0052: 16384 byte 24c128 EEPROM (writable)
[ 1.484830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.490026] s5p-ehci s5p-ehci: s5pv210 EHCI
[ 1.494102] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.501187] s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
[ 1.515995] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.519967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.526708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.533908] usb usb1: Product: s5pv210 EHCI
[ 1.538072] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
[ 1.543627] usb usb1: SerialNumber: s5pv210
[ 1.548308] hub 1-0:1.0: USB hub found
[ 1.551540] hub 1-0:1.0: 3 ports detected
[ 1.555827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.561733] [usb_host_phy_init]Already power on PHY
[ 1.566558] s5p-ohci s5p-ohci: s5pv210 OHCI
[ 1.570723] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[ 1.577758] s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
[ 1.638805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.644131] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.651333] usb usb2: Product: s5pv210 OHCI
[ 1.655480] usb usb2: Manufacturer: Linux 2.6.35.7 ohci_hcd
[ 1.661060] usb usb2: SerialNumber: s5pv210
[ 1.665694] hub 2-0:1.0: USB hub found
[ 1.668961] hub 2-0:1.0: 3 ports detected
[ 1.673268] Initializing USB Mass Storage driver...
[ 1.677974] usbcore: registered new interface driver usb-storage
[ 1.683794] USB Mass Storage support registered.
[ 1.688515] usbcore: registered new interface driver ums-alauda
[ 1.694411] usbcore: registered new interface driver ums-cypress
[ 1.700397] usbcore: registered new interface driver ums-datafab
[ 1.706385] usbcore: registered new interface driver ums-freecom
[ 1.712373] usbcore: registered new interface driver ums-isd200
[ 1.718275] usbcore: registered new interface driver ums-jumpshot
[ 1.724351] usbcore: registered new interface driver ums-sddr09
[ 1.730255] usbcore: registered new interface driver ums-sddr55
[ 1.736157] usbcore: registered new interface driver ums-usbat
[ 1.742027] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
[ 1.742034] s3c-udc : version 15 March 2009 (DMA Mode)
[ 1.754855] g_ether gadget: using random self ethernet address
[ 1.760536] g_ether gadget: using random host ethernet address
[ 1.766733] usb0: MAC 42:b0:c2:fc:39:4c
[ 1.770143] usb0: HOST MAC 26:d9:34:0a:9b:91
[ 1.774692] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 1.781230] g_ether gadget: g_ether ready
[ 1.784987] Registered gadget driver 'g_ether'
[ 1.790989] input: insignal-keypad as /devices/virtual/input/input0
[ 1.796156] wake enabled for irq 337
[ 1.799334] !!!!! s3c_irqwake_eintmask = 0xffffdfff !!!!!
[ 1.804715] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 1.810066] wake enabled for irq 338
[ 1.813568] !!!!! s3c_irqwake_eintmask = 0xffff9fff !!!!!
[ 1.818950] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 1.824301] wake enabled for irq 339
[ 1.827803] !!!!! s3c_irqwake_eintmask = 0xffff1fff !!!!!
[ 1.833185] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 1.838530] wake enabled for irq 340
[ 1.842038] !!!!! s3c_irqwake_eintmask = 0xfffe1fff !!!!!
[ 1.847420] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 1.852767] wake enabled for irq 341
[ 1.856274] !!!!! s3c_irqwake_eintmask = 0xfffc1fff !!!!!
[ 1.861655] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 1.866970] insignal-keypad insignal-keypad.0: insignal keypad input driver Initialized!!
[ 1.875503] input: unidisplay_ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0041/input/input1
[ 1.884591] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[ 1.889084] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 1.894866] using rtc device, s3c, for alarms
[ 1.898672] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.905018] i2c /dev entries driver
[ 1.910103] Linux video capture interface: v2.00
[ 1.913462] Initialize JPEG driver
[ 1.917044] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 1.923177] S5P HPD Driver, (c) 2009 Samsung Electronics
[ 1.928766] S5P CEC Driver, (c) 2009 Samsung Electronics
[ 1.934313] sysmmu_set_tablebase: CP15 TTBR0 : 0x40004000
[ 1.939041] sysmmu_set_tablebase: SYSMMU_G2D sysmmuconp->regs + S5P_PT_BASE_ADDR:0xE89A0014
[ 1.947375] sysmmu_on:SYSMMU_G2D sysmmuconp->regs + S5P_MMU_CTRL:0xE89A0000, reg:0x5
[ 1.955603] MFC(Multi Function Codec - FIMV v5.x) registered successfully
[ 1.962291] Mali: init_mali_clock mali_clock c059fc4c
[ 1.970557] Mali: Mali device driver loaded
[ 1.973341] s3c_bat_init
[ 1.975914] sec-fake-battery sec-fake-battery: s3c_bat_probe
[ 1.982394] Add ewtsa i2c driver
[ 1.984912] device-mapper: uevent: version 1.0.3
[ 1.989582] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 2.004796] device-mapper: multipath: version 1.1.1 loaded
[ 2.008808] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.015415] Bluetooth: Virtual HCI driver ver 1.3
[ 2.020211] Bluetooth: HCI UART driver ver 2.2
[ 2.024424] Bluetooth: HCI H4 protocol initialized
[ 2.029226] Bluetooth: HCI BCSP protocol initialized
[ 2.034164] Bluetooth: HCILL protocol initialized
[ 2.040049] cpuidle: using governor ladder
[ 2.043418] cpuidle: using governor menu
[ 2.046940] sdhci: Secure Digital Host Controller Interface driver
[ 2.052999] sdhci: Copyright(c) Pierre Ossman
[ 2.057444] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (88888888 Hz)
[ 2.064154] mmc0: no vmmc regulator found
[ 2.069274] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 2.075182] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (88888888 Hz)
[ 2.081939] mmc1: no vmmc regulator found
[ 2.088032] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 2.093659] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
[ 2.100421] mmc2: no vmmc regulator found
[ 2.106120] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 2.111735] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (88888888 Hz)
[ 2.118500] mmc3: no vmmc regulator found
[ 2.123593] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 2.130038] usbcore: registered new interface driver usbhid
[ 2.135051] usbhid: USB HID core driver
[ 2.140313] logger: created 64K log 'log_main'
[ 2.143462] logger: created 256K log 'log_events'
[ 2.148188] logger: created 64K log 'log_radio'
[ 2.152686] logger: created 64K log 'log_system'
[ 2.157700] No device for DAI RT5625 HiFi
[ 2.161102] No device for DAI RT5625 Voice
[ 2.165528] RT5625 Audio Codec 0.03 alsa 1.0.23rt5625_probe: 1
[ 2.170992] rt5625_probe: 2
[ 2.173759] rt5625_probe: 3
[ 2.176573] rt5625_add_i2c_device: 1
[ 2.181548] asoc: RT5625 HiFi <-> s3c64xx-i2s-v4 mapping ok
[ 2.209706] mmc2: new high speed SDHC card at address b368
[ 2.214001] mmcblk0: mmc2:b368 NCard 3.73 GiB
[ 2.218313] mmcblk0: p1 p2 p3 p4
[ 2.221783] g_ether gadget: high speed config #1: CDC Ethernet (ECM)
[ 2.238076] rt5625: initial ok
[ 2.239796] rt5625_add_i2c_device: 2
[ 2.247335] ALSA device list:
[ 2.248819] #0: origen (RT5625)
[ 2.252187] TCP cubic registered
[ 2.255350] NET: Registered protocol family 17
[ 2.259875] Bluetooth: L2CAP ver 2.14
[ 2.263400] Bluetooth: L2CAP socket layer initialized
[ 2.268497] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.272983] Bluetooth: SCO socket layer initialized
[ 2.277924] Bluetooth: RFCOMM TTY layer initialized
[ 2.282701] Bluetooth: RFCOMM socket layer initialized
[ 2.287811] Bluetooth: RFCOMM ver 1.11
[ 2.291543] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.296837] Bluetooth: BNEP filters: protocol multicast
[ 2.302046] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.308081] ++ s5pv310_cpufreq_init
[ 2.311497] -- s5pv310_cpufreq_init
[ 2.316126] SMDKV310 Button init function
[ 2.318877] wake enabled for irq 355
[ 2.322425] !!!!! s3c_irqwake_eintmask = 0x7ffc1fff !!!!!
[ 2.327806] !!!!! s3c_irqwake_intmask = 0xffffffdd !!!!!
[ 2.333127] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
[ 2.341663] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 2.349264] ctrl->mem.size = 0x384000
[ 2.352826] ctrl->mem.base = 0x5cf80000
[ 2.357006] FIMC0 registered successfully
[ 2.369778] ctrl->mem.size = 0x900000
[ 2.371952] ctrl->mem.base = 0x5d304000
[ 2.376041] FIMC1 registered successfully
[ 2.389772] ctrl->mem.size = 0x1800000
[ 2.392038] ctrl->mem.base = 0x5dc04000
[ 2.396087] FIMC2 registered successfully
[ 2.409771] ctrl->mem.size = 0x300000
[ 2.411950] ctrl->mem.base = 0x5f404000
[ 2.416004] FIMC3 registered successfully
[ 2.430249] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[ 2.582835] RAMDISK: gzip image found at block 0
[ 3.383533] VFS: Mounted root (ext2 filesystem) on device 1:0.
INIT: version 2.84 booting
INIT: Entering runlevel: 3
Linux 2.6.35.7-Origen(by InSignal Co., Ltd.)
/) /)
(='.'=)
login[1216]: root login on 's3c2410_serial2'
root@godori:~#
ToolChain spec입니다.
root@godori:~/soc/v310# arm-unknown-linux-gnueabi-gcc -v
Using built-in specs.
Target: arm-unknown-linux-gnueabi
Configured with: /home/ghcstop/ct/crosstool-ng-1.12.0/.build/src/gcc-4.4.6/configure --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu --target=arm-unknown-linux-gnueabi --prefix=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi --with-sysroot=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --enable-languages=c,c++ --disable-multilib --with-pkgversion='crosstool-NG 1.12.0' --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-mpfr=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-ppl=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-cloog=/home/ghcstop/ct/crosstool-ng-1.12.0/.build/arm-unknown-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --enable-threads=posix --enable-target-optspace --with-local-prefix=/home/ghcstop/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --disable-nls --enable-c99 --enable-long-long
Thread model: posix
gcc version 4.4.6 (crosstool-NG 1.12.0)