2GB micro SD 에 최근 업로드된 Froyo 를 구어서
부팅하면 처음은 되는데요,
파워버튼 오래눌러 Power Off 선택해서 끈 다음 다시 시작하려면 부팅이 안됩니다.
4번이나 이미지 굽는 삽질을 했네요.. 일단 켰다가 끄면 영영 돌아올 수 없습니다. ㅠㅠ
adb_open 상태에서 멈춰 있습니다.
시리얼포트로 로그를 받아보았습니다.
...
Console: colour dummy device 80x30
console [ttySAC2] enabled
Calibrating delay loop... 996.00 BogoMIPS (lpj=1945600)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
S5PC110 Hardware version : EVT1
S3C Power Management, Copyright 2004 Simtec Electronics
invalid media device
invalid media device
S5PV210 Power Domain API Enable
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2410-i2c.0: slave address 0x10
s3c-i2c s3c2410-i2c.0: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2410-i2c.1: slave address 0x10
s3c-i2c s3c2410-i2c.1: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2410-i2c.2: slave address 0x10
s3c-i2c s3c2410-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c.2: i2c-2: S3C I2C adapter
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1268K
--------------------------------------------------------
hkc1xx_sysfs_init(431) : Sleep Disable Flag SET!!(Wake_lock_init)
--------------------------------------------------------
Loaded driver for PL330 DMAC-0 s3c-pl330
DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
NetWinder Floating Point Emulator V0.97 (extended precision)
ashmem: initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 572
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
s3cfb s3cfb: [fb2] dma: 0x54902000, cpu: 0xe9000000, size: 0x007f8000
fbcon: s3cfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
FIMD src sclk = 133400000
s3cfb s3cfb: registered successfully
max8698_ldo_enable[251] ldo 2
regulator: LDO2: 1100 mV
regulator: LDO3: 1100 mV
max8698_ldo_enable[251] ldo 4
regulator: LDO4: 3300 mV
regulator: LDO5: 2800 mV
regulator: LDO6: 2600 mV
regulator: LDO7: 2800 mV
regulator: LDO8: 3300 mV
regulator: LDO9: 3000 mV
max8698_ldo_enable[251] ldo 10
regulator: BUCK1: 750 <--> 1500 mV
max8698_ldo_enable[251] ldo 11
regulator: BUCK2: 950 <--> 1200 mV
regulator: BUCK3: 1800 mV
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5pv210-ehci s5pv210-ehci: s5pv210 EHCI
s5pv210-ehci s5pv210-ehci: new USB bus registered, assigned bus number 1
s5pv210-ehci s5pv210-ehci: irq 87, io mem 0xec200000
s5pv210-ehci s5pv210-ehci: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5pv210-ohci s5pv210-ohci: s5pv210 OHCI
s5pv210-ohci s5pv210-ohci: new USB bus registered, assigned bus number 2
s5pv210-ohci s5pv210-ohci: irq 87, io mem 0xec300000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c05d7420
android_bind
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
f_adb init
android_register_function adb
f_mass_storage init
android_register_function usb_mass_storage
mass_storage_bind_config
fsg_probe pdata: c05d7444
android_usb gadget: Number of LUNs=1
adb_bind_config
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: hkc1xx-keypad as /devices/virtual/input/input0
--------------------------------------------------------
HardKernel : ODROID-T Keypad driver initialized!! Ver 1.0
--------------------------------------------------------
input: hkc1xx-touch as /devices/virtual/input/input1
HKC1XX TOUCH request_irq = 40
--------------------------------------------------------
HardKernel : ODROID-T(MT) Multi-Touch driver initialized!! Ver 1.0
--------------------------------------------------------
input: orientation as /devices/virtual/input/input2
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
using rtc device, s3c, for alarms
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
bma150 4-0038: bma150 found
bma150 4-0038: al_version=2, ml_version=1
input: accelerometer as /devices/virtual/input/input3
input: geomagnetic as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input4
input: geomagnetic_raw as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input5
i2c-gpio i2c-gpio.4: using pins 16 (SDA) and 14 (SCL)
Linux video capture interface: v2.00
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PV210 HPD Driver, (c) 2009 Samsung Electronics
S5PC11X CEC Driver, (c) 2009 Samsung Electronics
max17040 2-0036: MAX17040 Fuel-Gauge Ver 02
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc2::
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI WM8991 ADC/DAC Primary
In hkdkc110_audio_init function
wm8991: WM8991 Audio Codec 0.2
s3c_preallocate_dma_buffer: VA-ff00a000, PA-34E60000, 131072bytes
s3c_preallocate_dma_buffer: VA-ff02a000, PA-34E80000, 131072bytes
asoc: WM8991 ADC/DAC Primary <-> s3c64xx-i2s mapping ok
s3c_preallocate_dma_buffer: VA-ff04a000, PA-34EA0000, 131072bytes
s3c_preallocate_dma_buffer: VA-ff06a000, PA-34EC0000, 131072bytes
asoc: WM8991 ADC/DAC Primary <-> s3c64xx-i2s mapping ok
Failed to add route LIN4->LIN34 PGA
hkdkc110_wm8991_init_tx
Failed to add route MicIn->AINL
ASoC: Failed to create RIN4/RXP debugfs file
ASoC: Failed to create LIN4/RXN debugfs file
ALSA device list:
#0: hkdkc110 (WM8991)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
mmc0: new high speed SD card at address a3f2
mmcblk0: mmc0:a3f2 SD02G 1.87 GiB
mmcblk0: p1
regulator_init_complete: incomplete constraints, leaving VCC_MEM on
regulator_init_complete: incomplete constraints, leaving {VADC/VSYS/VKEY}_2.8V on
regulator_init_complete: incomplete constraints, leaving VUOTG_A_3.3V/VUHOST_A_3.3V on
regulator_init_complete: incomplete constraints, leaving VCC_2.6V on
regulator_init_complete: incomplete constraints, leaving VMMC_2.8V/VEXT_2.8V on
regulator_init_complete: incomplete constraints, leaving V_MIPI_1.8V on
regulator_init_complete: incomplete constraints, leaving VUOTG_D_1.1V/VUHOST_D_1.1V on
============== RTC Debug Param =================
tm_year = 110
tm_mon = 9
tm_mday = 1
tm_hour = 16
tm_min = 5
tm_sec = 38
================================================
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-10-01 16:05:38 UTC (1285949138)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
Freeing init memory: 152K
mmc1: new SD card at address aaaa
mmcblk1: mmc1:aaaa SU02G 1.84 GiB
mmcblk1: p1 p2
init: cannot open '/initlogo.rle'
PA FB = 0x54902000, bits per pixel = 32
screen width=1360 height=768 va=0xe4902000 pa=0x54902000
Back frameBuffer[0].VAddr=e4cfe000 PAddr=54cfe000 size=4177920
invalid media device
EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
init: cannot find '/system/bin/orientationd', disabling 'orientationd'
init: cannot find '/system/bin/geomagneticd', disabling 'geomagneticd'
init: cannot find '/system/bin/sh', disabling 'console'
init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
init: cannot find '/system/bin/vold', disabling 'vold'
init: cannot find '/system/bin/netd', disabling 'netd'
init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/app_process', disabling 'zygote'
init: cannot find '/system/bin/mediaserver', disabling 'media'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/installd', disabling 'installd'
init: cannot find '/system/bin/keystore', disabling 'keystore'
enabling adb
adb_open
일단 다시 한번 복구한 다음 정상 종료로 셧다운을 한번 해보시고 재부팅 후 다시 강제 종료 테스트 부탁드립니다.