회원 및 비회원 모두 열람이 가능합니다. 최대 업로드 가능한 용량은 20MB 입니다.
글 수 1,910
자료에 올라와 있는 Aesop_V210_Kernel_2.6.32_1026 을 다운 받아 컴파일 후 zImage 를
#> dnw 0xc0008000;nand erase 80000 300000;nand write 0xc0008000 80000 300000
$> smdk-usbdl -a 0xc0008000 -f ./zImage 호스트 PC에서 실행
#> setenv bootcmd nand read 0xc0008000 80000 300000;bootm 0xc0008000
#> saveenv #> boot 와 같이 하여 다운후 다시 부팅 하면 아래와 같이 커널패닉이 나는데...왜 그런거죠?.. FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hubstatus=0x0000, (1 << USB_DEVICE_SELF_POWERED)=0x0001
eth0: link down
IP-Config: Complete:
device=eth0, addr=192.168.139.200, mask=255.255.255.0, gw=192.168.139.2,
host=192.168.139.200, domain=, nis-domain=(none),
bootserver=192.168.139.128, rootserver=192.168.139.128, rootpath=
Looking up port of RPC 100003/2 on 192.168.139.128
g_ether gadget: high speed config #1: CDC Ethernet (ECM)
rpcbind: server 192.168.139.128 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.139.128
rpcbind: server 192.168.139.128 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
Root-NFS: Server returned error -5 while mounting /nfsroot/RootFS-S5PV210-Xwindows
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 512 mtdblock0 (driver?)
1f01 5120 mtdblock1 (driver?)
1f02 518656 mtdblock2 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
#> saveenv #> boot 와 같이 하여 다운후 다시 부팅 하면 아래와 같이 커널패닉이 나는데...왜 그런거죠?.. FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hubstatus=0x0000, (1 << USB_DEVICE_SELF_POWERED)=0x0001
eth0: link down
IP-Config: Complete:
device=eth0, addr=192.168.139.200, mask=255.255.255.0, gw=192.168.139.2,
host=192.168.139.200, domain=, nis-domain=(none),
bootserver=192.168.139.128, rootserver=192.168.139.128, rootpath=
Looking up port of RPC 100003/2 on 192.168.139.128
g_ether gadget: high speed config #1: CDC Ethernet (ECM)
rpcbind: server 192.168.139.128 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.139.128
rpcbind: server 192.168.139.128 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
Root-NFS: Server returned error -5 while mounting /nfsroot/RootFS-S5PV210-Xwindows
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 512 mtdblock0 (driver?)
1f01 5120 mtdblock1 (driver?)
1f02 518656 mtdblock2 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
김정현
Root-NFS: Server returned error -5 while mounting /nfsroot/RootFS-S5PV210-Xwindows>> server측 응답실패로 nfs mount에 실패한 것으로 보여집니다.
/etc/exports 설정을 확인해보시고,(ex) /etc/exports
/nfsroot/RootFS-S5PV210-Xwindows *(rw,sync,no_subtree_check,no_root_squash,no_all_squash)
nfs 서버를 재시작해보세요./etc/init.d/nfs-kernel-server restart
추가로, bootargs와 현재 네트워크 구성을 확인해보시면 될 듯 합니다.현재 host:~.200, nfs-server:~.128, gateway:~.2, LAN(eth0)을 사용하도록 구성하셨네요.
/etc/exports 설정을 확인해보시고,(ex) /etc/exports
/nfsroot/RootFS-S5PV210-Xwindows *(rw,sync,no_subtree_check,no_root_squash,no_all_squash)
nfs 서버를 재시작해보세요./etc/init.d/nfs-kernel-server restart
추가로, bootargs와 현재 네트워크 구성을 확인해보시면 될 듯 합니다.현재 host:~.200, nfs-server:~.128, gateway:~.2, LAN(eth0)을 사용하도록 구성하셨네요.
올려주신 로그를 보면 부트 아규먼트가Kernel command line: console=ttySAC1,115200 root=/dev/nfs rw nfsroot=192.168.12.1:/nfsroot/RootFS-S5PV210-Xwindows ip=192.168.139.150:192.168.12.1:192.168.139.1:255.255.255.0::usb0:off ethaddr=00:40:5c:26:0a:5b
네트워크 설정이 어제 올리신것과 조금 다른 듯 하네요...
이렇게 해보면 되지 않을까 싶은데요...
Kernel command line: console=ttySAC1,115200 root=/dev/nfs rw nfsroot=192.168.12.1:/nfsroot/RootFS-S5PV210-Xwindows ip=192.168.12.2:192.168.12.1:192.168.12.1:255.255.255.0::usb0:off ethaddr=00:40:5c:26:0a:5b
네트워크 설정이 어제 올리신것과 조금 다른 듯 하네요...
이렇게 해보면 되지 않을까 싶은데요...
Kernel command line: console=ttySAC1,115200 root=/dev/nfs rw nfsroot=192.168.12.1:/nfsroot/RootFS-S5PV210-Xwindows ip=192.168.12.2:192.168.12.1:192.168.12.1:255.255.255.0::usb0:off ethaddr=00:40:5c:26:0a:5b
