iMX21(M9328MX21ADSE) 개발 보드 판매합니다.

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M9328MX21ADSE&parentCode=i.MX21&fpsp=1

를 참조 하시면 됩니다.

현재는 windosCE.net이 설치되어 있는 모습에 사진을 첨부 합니다.

Mainboard + LCD 입니다.

가격은 13만원으로 정해 봤습니다만, 네고 가능합니다.

분당 직거래이며, 나머지 지역은 택배로 합니다.

연락은 공일공-칠235-오66삼 으로 메시지 부탁합니다.


i.MX21 Processor
Two clock-source crystals, 32.768 KHz and 26 MHz
Power connector for +5.0-volts in from an external, regulated power supply, an in-line fuse, and a power on/off switch.
Voltage regulators that step down the 5.0-volt input to Vcc (3.0-volts), 2.5-volts, 1.8-volts, and 1.5-volts.
Multi-ICE debug support
Two 8M × 16-bit Burst Flash memory devices, configured as one 32MB, 32-bit device
Two 16M × 16-bit SDRAM devices, configured as one 64MB, 32-bit device
High speed expansion connectors for optional add on cards
Two-board system: modular CPU board plugs into Base board; Base board has connections for LCD display panel and keypad and TV Encoder card
Memory mapped expansion I/O
Configuration and user definable DIP switches
SD/MMC memory card connector
Two RS232 transceivers and DB9 connectors (one configured for DCE and one for DTE operation) supporting on-chip UART ports
External UART with RS232 transceiver and DB9 connector
IrDA transceiver that conforms to Specification 1.4 of the Infra-red Data Association
USB OTG (On The Go) interface transceiver and USB mini AB
connector
Separate LCD panel assembly with a ribbon cable that connects to the Base board and interfaces directly with the M9328MX21ADS
Touch panel controller for use with the LCD
Separate Keypad unit with 36 push button keys
Separate CMOS Image Sensor Card
Audio CODEC includes an 11.28MHz crystal oscillator, a 3.5mm audio input jack, a 3.5mm microphone jack, and a 3.5mm headphone jack
Cirrus Logic CS8900A Ethernet controller, with RJ-45 connector for connecting to a system hub
Two 32 × 3-pin DIN expansion connectors with most i.MX21 I/O signals
Variable resistor for emulation of a battery voltage level
NAND Flash card (Plugs into CPU)
LED indicators for power, external bus activity, Ethernet activity, and two LEDs for user defined status indiction
Universal power supply with 5.0-volt output @ 2.4A
USB cable
RS232 serial cable
Two RJ-45 Ethernet cables, network and crossover