오드로이드에 USB NFS를 이용해 볼려고 이제현님이 올려주신 글을 따라하면서
커널을 올렸는데요.
커널 올리고 패닉이 나서 복구용 컴파일 이미지를 다시 올렸는데도 자꾸 패닉이 나네요.
뭐가 문제인지 초보라 잘 모르겠네요.
아래 부팅로그 올립니다.
어떤 문제인지 알려주시면 감사하겠습니다.
참 그리고 오드로이드 커널 컴파일시 이솝용 S5PC100 크로스 컴파일러를 사용하면 혹시 문제가 되나요.
그리고 일반 리눅스 올릴려고 하는데요. 이솝용 S5PC100 루트파일 시스템을 사용해도 혹시 되는지요?
잘 몰라서 또 질문이 많네요.
그럼 수고하세요~^^
Starting kernel ...
Uncompressing Linux.............................................................
Linux version 2.6.27 (
c@server) (gcc version 4.2.2) #14 Sun Oct 25 17:04:42 KST9
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=00c5387f
Machine: SMDKC100
Memory policy: ECC disabled, Data cache writeback
CPU S5PC100 (id 0x43100000)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S5PC100: PLL settings, A=1332000000, M=267000000, E=67500000, H=24000000
S5PC100_: ARMCLK=666000000, HCLKD0=166500000, PCLKD0=83250000, HCLK=133500000, 0
mout_apll: source is fout_apll (1), rate is 1332000000
mout_epll: source is fout_epll (1), rate is 67500000
mout_mpll: source is mpll (1), rate is 267000000
mout_hpll: source is srclk (1), rate is 24000000
mmc_bus: source is dout_mpll (1), rate is 44500000
mmc_bus: source is dout_mpll (1), rate is 66750000
mmc_bus: source is dout_mpll (1), rate is 66750000
usb-host-bus: source is dout_mpll (1), rate is 133500000
uclk1: source is dout_mpll (1), rate is 66750000
spi-bus: source is dout_mpll2 (1), rate is 66750000
spi-bus: source is dout_mpll2 (1), rate is 66750000
spi-bus: source is dout_mpll2 (1), rate is 66750000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
sclk_irda: source is dout_mpll (1), rate is 133500000
sclk_pwi: source is srclk (0), rate is 0
sclk_lcd: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_mixer: source is clk_27m (0), rate is 27000000
s5pc1xx: 10485760 bytes SDRAM reserved for fimc at 0x20796000
s5pc1xx: 33554432 bytes SDRAM reserved for mfc at 0x21196000
s5pc1xx: 10485760 bytes SDRAM reserved for jpeg at 0x23196000
s5pc1xx: 16777216 bytes SDRAM reserved for pmem at 0x23b96000
s5pc1xx: 4194304 bytes SDRAM reserved for pmem_gpu1 at 0x24b96000
s5pc1xx: 6291456 bytes SDRAM reserved for pmem_adsp at 0x24f96000
CPU0: D VIPT write-back cache
CPU0: cache: 768 bytes, associativity 1, 8 byte lines, 64 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: root=/dev/mmcblk0p2 rw rootfstype=ext3 mem=384m init=/init0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 305024KB available (3568K code, 887K data, 156K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 288 bytes
regulator: core version 0.5
NET: Registered protocol family 16
s5pc1xx Power Management init, (c) 2009 Samsung Electronics
Requested domain-LP mode: 2
S5PC100: Initialising architecture
S3C PL330-DMA Controller Driver, (c) 2008-2009 Samsung Electronics
Total 24 DMA channels will be initialized.
SCSI subsystem initialized
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
msgmni has been set to 596
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc (133500000 Hz)
/n*** mmc->f_min : 521484***
/n*** mmc->f_max : 133500000***
Registered led device: mmc0
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc (133500000 Hz)
/n*** mmc->f_min : 521484***
/n*** mmc->f_max : 133500000***
Registered led device: mmc1
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: mmc_bus (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: hsmmc (133500000 Hz)
/n*** mmc->f_min : 521484***
/n*** mmc->f_max : 133500000***
Registered led device: mmc2
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
S3C_LCD clock got enabled :: 133.500 Mhz
LCD TYPE :: LMS350DF will be initialized
===================>>>>>>> S3C_FB_VFRAME_FREQ 60
GPIO-20 autorequested
GPIO-21 autorequested
power on sequence done...
display on sequence done...
Window[0] - FB1: map_video_memory: clear ff000000:00096000
FB1: map_video_memory: dma=37a00000 cpu=ff000000 size=00096000
Window[0] - FB2: map_video_memory: clear ff04b000:0004b000
FB2: map_video_memory: dma=37a4b000 cpu=ff04b000 size=0004b000
Console: switching to colour frame buffer device 40x30
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff096000:00096000
FB1: map_video_memory: dma=37b00000 cpu=ff096000 size=00096000
Window[1] - FB2: map_video_memory: clear ff0e1000:0004b000
FB2: map_video_memory: dma=37b4b000 cpu=ff0e1000 size=0004b000
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff12c000:0004b000
FB1: map_video_memory: dma=37980000 cpu=ff12c000 size=0004b000
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff177000:0004b000
FB1: map_video_memory: dma=37c00000 cpu=ff177000 size=0004b000
fb3: s3cfb frame buffer device
Window[4] - FB1: map_video_memory: clear ff1c2000:0004b000
FB1: map_video_memory: dma=37c80000 cpu=ff1c2000 size=0004b000
fb4: s3cfb frame buffer device
*** KEVIN_DEBUG : First we search for SDIO...***
SMDK board LCD Backlight Device Driver (c) 2008 Samsung Electronics
Registered led device: lcd-backlight
*** KEVIN_DEBUG : ...then normal SD...***
***KEVIN : mmc_attach_sd***
s5pc100-uart.0: s3c2410_serial0 at MMIO 0xec000000 (irq = 16) is a S3C6400/10
s5pc100-uart.1: s3c2410_serial1 at MMIO 0xec000400 (irq = 20) is a S3C6400/10
s5pc100-uart.2: s3c2410_serial2 at MMIO 0xec000800 (irq = 24) is a S3C6400/10
s5pc100-uart.3: s3c2410_serial3 at MMIO 0xec000c00 (irq = 28) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
mmc0: new SD card at address 8ba1
mmcblk0: mmc0:8ba1 SU02G 1931264KiB
mmcblk0:<7>PM: Adding info for No Bus:log_main
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
p1 p2
logger: created 64K log 'log_radio'
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
Linux video capture interface: v2.00
S5PC100 MFC Driver, (c) 2009 Samsung Electronics
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
S5PC1XX TVOUT Driver probe is done
S5PC1XX TVOUT Driver init OK.
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
s3c-fimc: controller 2 registered successfully
S3C JPEG Driver, (c) 2007 Samsung Electronics
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1020100
Driver 'sd' needs updating - please use bus_type methods
[S3C USB-OTG MODE] : DMA
android init
android_bind
mass_storage_function_add
android_usb gadget: Number of LUNs=1
adb_function_add
composite vendor = 0x18d1, product = 0x1, device = 0x222
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: hkc100-keypad as /class/input/input0
HardKernel-C100(HKC100) dev board keypad driver initialized!!
input: hkc100-touch as /class/input/input1
TOUCH ID : 0xC2
HKC100 TOUCH request_irq = 36
HardKernel-C100 touch driver initialized!! Ver 1.0
bma150_sensor_init
input: bma150-sensor as /class/input/input2
BMA150 Sensor I2C 3 Wire Mode [rd = 0x00]
BMA150 Sensor Chip version [1.2]
BMA150 Sensor Chip ID [2]
HardKernel-C100 BMA150 Sensor driver initialized!! Ver 1.0
platform_driver_register 0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c-rtc: rtc disabled, re-enabling
s3c-rtc s3c-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2410-i2c s3c2410-i2c.0: slave address 0x10
s3c2410-i2c s3c2410-i2c.0: bus frequency set to 379 KHz
parent clock for camera: 133.500 MHz, divisor: 3
s3c2410-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
s3c2410-i2c s3c2410-i2c.1: slave address 0x10
s3c2410-i2c s3c2410-i2c.1: bus frequency set to 379 KHz
parent clock for camera: 133.500 MHz, divisor: 3
s3c2410-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
max17040 0-0036: MAX17040 Fuel-Gauge Ver 02
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
ret : fe
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
s5pc1xx_snd_rxctrl : RXDMA -> [off]
s5pc1xx_snd_rxctrl : IISCON [0x00000e78]
wm8991: WM8991 Audio Codec 0.1
WM8991 Control Interface : 2-Wire Mode, CSB Low
playback: 1, capture : 1
asoc: WM8991 ADC/DAC Primary <-> s5pc1xx-i2s1 mapping ok
Failed to add route LIN4->LIN34 PGA
playback: 1, capture : 1
asoc: SPDIF PAIFRX <-> s5p-spdif mapping ok
ALSA device list:
#0: s5pc100 (WM8991)
#1: smdkc100_spdif (SPDIF)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <
[email protected]>
All bugs added by David S. Miller <
[email protected]>
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
s3c-rtc s3c-rtc: setting system clock to 2011-05-26 17:53:54 UTC (1306432434)
*** KEVIN_DEBUG : First we search for SDIO...***
*** KEVIN_DEBUG : ...then normal SD...***
***KEVIN : mmc_attach_sd***
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
mmc1: new high speed SD card at address 0002
mmcblk1: mmc1:0002 00000 1974272KiB
mmcblk1: p1
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 156K
Warning: unable to open an initial console.
*** KEVIN_DEBUG : First we search for SDIO...***
Kernel panic - not syncing: Attempted to kill init!
이솝에서 만든 리눅스 루트파일 시스템도 별 문제없이 올라갈것 같습니다.크로스 툴체인은 가능하면 아래 링크에서 권장하는 것을 이용하시길 바랍니다.http://dev.odroid.com/projects/uboot/wiki/
다른 툴체인은 테스트해보지 못했습니다.