회원 및 비회원 모두 열람이 가능합니다. 최대 업로드 가능한 용량은 20MB 입니다.
글 수 1,910
서울 올라오자마자, 어제 한잔 들이키고.............에구 속쓰려.....ㅎㅎ
오늘 2.6.28 kernel 작업을 몇가지 하였습니다...
일단 ethernet/sound/framebuffer/touch까지는 확인하였습니다.
몇가지 손보고 나면 Android 패치들어가야겠네요......ㅎㅎ
이궁....^^
커널 버전을 하두 여러개 손대니깐 정신이 하나두 없습니다.
release본 말고도 2.6.24 손대다가 2.6.28도 두 종류 포팅하니 정신이 하나두 없네요........ㅎㅎ
주말 잘보내시기 바랍니다.
로그....
===============================
U-Boot 1.1.6 (Mar 21 2009 - 18:13:38) for AESOP6410
CPU: S3C6410@666MHz
Fclk = 666MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (ASYNC Mode)
Board: AESOP-S3C6410
DRAM: 128 MB
Flash: 0 kB
NAND: 256 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
smc911x: initializing
smc911x: detected LAN9215 controller
smc911x: phy initialized
smc911x: MAC 00:40:5c:26:0a:5b
TFTP from server 192.168.0.199; our IP address is 192.168.0.101
Filename 'zImage'.
Load address: 0xc0008000
Loading: T T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################
done
Bytes transferred = 1770768 (1b0510 hex)
Boot with zImage
Starting kernel ...
Uncompressing Linux................................................................................................................... done, booting the kernel.
Linux version 2.6.28.6 (root@build) (gcc version 4.2.4) #33 Sat Mar 28 14:02:59 KST 2009
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C64XX: PLL settings, A=666000000, M=532000000, E=24000000
S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 666000000
mout_epll: source is fout_epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-host-bus: source is mout_epll (0), rate is 24000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.199:/opt/s3c6400/rootfs6400 ip=192.168.0.101:192.168.0.199:192.168.0.1:255.255.255.0::eth0:off console=ttySAC0,115200n81 ethaddr=00:40:5c:26:0a:5b
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125908KB available (3272K code, 407K data, 144K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 316 bytes
NET: Registered protocol family 16
S3C6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE: aesop6410-lms350df01 will be initialized
GPIO-18 autorequested
GPIO-19 autorequested
power on sequence done...
display on sequence done...
Window[0] - FB1: map_video_memory: clear ff000000:00096000
FB1: map_video_memory: dma=57200000 cpu=ff000000 size=00096000
Window[0] - FB2: map_video_memory: clear ff04b000:0004b000
FB2: map_video_memory: dma=5724b000 cpu=ff04b000 size=0004b000
Console: switching to colour frame buffer device 40x30
fb0: s3cfb frame buffer device
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
brd: module loaded
loop: module loaded
eth0: LAN9215 (rev 0) at 0x18000000 IRQ 104
eth0: Ethernet addr: 00:09:c0:ff:ec:48
Driver 'sd' needs updating - please use bus_type methods
spi /dev entries driver
S3C64XX SPI Driver
hspi registers c8828000 (c7144160, c0365980)
hspi irq resource c036599c (80)
s3c2410-spi s3c2410-spi.0: s3c2410-spi.0: S3C SPI adapter
s3c2410-spi.0: S3C SPI adapter
hspi registers c882c000 (c71441c0, c03659c0)
hspi irq resource c03659dc (81)
s3c2410-spi s3c2410-spi.1: s3c2410-spi.1: S3C SPI adapter
s3c2410-spi.1: S3C SPI adapter
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
S3C Touchscreen driver, (c) 2008 Samsung Electronics
S3C TouchScreen got loaded successfully : 12 bits
input: S3C TouchScreen as /class/input/input0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c.0: slave address 0x10
s3c2440-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c2440-i2c s3c2440-i2c.1: slave address 0x10
s3c2440-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
s3c2440-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
at24 1-0057: 16384 byte 24c128 EEPROM (writable)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using DMA
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
WM9713/WM9714 SoC Audio Codec 0.15
playback: 1, capture : 1
asoc: AC97 HiFi <-> s3c64xx-ac97 mapping ok
ALSA device list:
#0: SMDK6400 (WM9713)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
eth0: link down
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
mmc0: error -110 whilst initialising SD card
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
IP-Config: Complete:
device=eth0, addr=192.168.0.101, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.101, domain=, nis-domain=(none),
bootserver=192.168.0.199, rootserver=192.168.0.199, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.199
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 192.168.0.199
VFS: Mounted root (nfs filesystem).
Freeing init memory: 144K
INIT: Entering runlevel: 3
sh: 0: unknown operand
Welcome to the AESOP-6410
You may now login as 'root'.
godori login: root
Linux 2.6.21.5-cfs-v19 AESOP6410
/) /)
(='.'=)
login[2330]: root login on 'tts/0'
s3c_mfc: version magic '2.6.21.5-cfs-v19 mod_unload ARMv6 ' should be '2.6.28.6 mod_unload ARMv6 '
insmod: error inserting 's3c_mfc.ko': -1 Invalid module format
s3c_pp: version magic '2.6.21.5-cfs-v19 mod_unload ARMv6 ' should be '2.6.28.6 mod_unload ARMv6 '
insmod: error inserting 's3c_pp.ko': -1 Invalid module format
root@godori:~#
root@godori:~#
root@godori:~#
root@godori:~# madplay m.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
Title: Master of Puppets
Artist: Metallica
Album: Master of Puppets
Genre: Metal
Comment: http://fly.to/massmp3/
98 frames decoded (0:00:02.5), -3.9 dB peak amplitude, 0 clipped samples
오늘 2.6.28 kernel 작업을 몇가지 하였습니다...
일단 ethernet/sound/framebuffer/touch까지는 확인하였습니다.
몇가지 손보고 나면 Android 패치들어가야겠네요......ㅎㅎ
이궁....^^
커널 버전을 하두 여러개 손대니깐 정신이 하나두 없습니다.
release본 말고도 2.6.24 손대다가 2.6.28도 두 종류 포팅하니 정신이 하나두 없네요........ㅎㅎ
주말 잘보내시기 바랍니다.
로그....
===============================
U-Boot 1.1.6 (Mar 21 2009 - 18:13:38) for AESOP6410
CPU: S3C6410@666MHz
Fclk = 666MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (ASYNC Mode)
Board: AESOP-S3C6410
DRAM: 128 MB
Flash: 0 kB
NAND: 256 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
smc911x: initializing
smc911x: detected LAN9215 controller
smc911x: phy initialized
smc911x: MAC 00:40:5c:26:0a:5b
TFTP from server 192.168.0.199; our IP address is 192.168.0.101
Filename 'zImage'.
Load address: 0xc0008000
Loading: T T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################
done
Bytes transferred = 1770768 (1b0510 hex)
Boot with zImage
Starting kernel ...
Uncompressing Linux................................................................................................................... done, booting the kernel.
Linux version 2.6.28.6 (root@build) (gcc version 4.2.4) #33 Sat Mar 28 14:02:59 KST 2009
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C64XX: PLL settings, A=666000000, M=532000000, E=24000000
S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 666000000
mout_epll: source is fout_epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-host-bus: source is mout_epll (0), rate is 24000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.199:/opt/s3c6400/rootfs6400 ip=192.168.0.101:192.168.0.199:192.168.0.1:255.255.255.0::eth0:off console=ttySAC0,115200n81 ethaddr=00:40:5c:26:0a:5b
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125908KB available (3272K code, 407K data, 144K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 316 bytes
NET: Registered protocol family 16
S3C6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE: aesop6410-lms350df01 will be initialized
GPIO-18 autorequested
GPIO-19 autorequested
power on sequence done...
display on sequence done...
Window[0] - FB1: map_video_memory: clear ff000000:00096000
FB1: map_video_memory: dma=57200000 cpu=ff000000 size=00096000
Window[0] - FB2: map_video_memory: clear ff04b000:0004b000
FB2: map_video_memory: dma=5724b000 cpu=ff04b000 size=0004b000
Console: switching to colour frame buffer device 40x30
fb0: s3cfb frame buffer device
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
brd: module loaded
loop: module loaded
eth0: LAN9215 (rev 0) at 0x18000000 IRQ 104
eth0: Ethernet addr: 00:09:c0:ff:ec:48
Driver 'sd' needs updating - please use bus_type methods
spi /dev entries driver
S3C64XX SPI Driver
hspi registers c8828000 (c7144160, c0365980)
hspi irq resource c036599c (80)
s3c2410-spi s3c2410-spi.0: s3c2410-spi.0: S3C SPI adapter
s3c2410-spi.0: S3C SPI adapter
hspi registers c882c000 (c71441c0, c03659c0)
hspi irq resource c03659dc (81)
s3c2410-spi s3c2410-spi.1: s3c2410-spi.1: S3C SPI adapter
s3c2410-spi.1: S3C SPI adapter
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
S3C Touchscreen driver, (c) 2008 Samsung Electronics
S3C TouchScreen got loaded successfully : 12 bits
input: S3C TouchScreen as /class/input/input0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c.0: slave address 0x10
s3c2440-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c2440-i2c s3c2440-i2c.1: slave address 0x10
s3c2440-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
s3c2440-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
at24 1-0057: 16384 byte 24c128 EEPROM (writable)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using DMA
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
WM9713/WM9714 SoC Audio Codec 0.15
playback: 1, capture : 1
asoc: AC97 HiFi <-> s3c64xx-ac97 mapping ok
ALSA device list:
#0: SMDK6400 (WM9713)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
eth0: link down
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
mmc0: error -110 whilst initialising SD card
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
IP-Config: Complete:
device=eth0, addr=192.168.0.101, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.101, domain=, nis-domain=(none),
bootserver=192.168.0.199, rootserver=192.168.0.199, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.199
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 192.168.0.199
VFS: Mounted root (nfs filesystem).
Freeing init memory: 144K
INIT: Entering runlevel: 3
sh: 0: unknown operand
Welcome to the AESOP-6410
You may now login as 'root'.
godori login: root
Linux 2.6.21.5-cfs-v19 AESOP6410
/) /)
(='.'=)
login[2330]: root login on 'tts/0'
s3c_mfc: version magic '2.6.21.5-cfs-v19 mod_unload ARMv6 ' should be '2.6.28.6 mod_unload ARMv6 '
insmod: error inserting 's3c_mfc.ko': -1 Invalid module format
s3c_pp: version magic '2.6.21.5-cfs-v19 mod_unload ARMv6 ' should be '2.6.28.6 mod_unload ARMv6 '
insmod: error inserting 's3c_pp.ko': -1 Invalid module format
root@godori:~#
root@godori:~#
root@godori:~#
root@godori:~# madplay m.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
Title: Master of Puppets
Artist: Metallica
Album: Master of Puppets
Genre: Metal
Comment: http://fly.to/massmp3/
98 frames decoded (0:00:02.5), -3.9 dB peak amplitude, 0 clipped samples
