안녕하세요.

고현철입니다.

aesop-mp2530f 2차 sample입니다.(1차 정식 공제보드가 될....)

2개정도의 점퍼가 나왔지만, 다행히 큰 문제없이 넘어갔습니다.
사진을 디카로 찍지 못해서(찍사의 실력문제도 있공...--;) 좀 부실하게 나왔습니다만

실제로 굉장히 예쁩니다......ㅎㅎ

4.8" 800x480 LCD 정말 좋네요......진짜 깔끔합니다.

슬슬 공제 입금공지 올려야겠네요.......^^

참고로 동영상 돌아가는 장면도 찍었습니다. 핸폰이로 찍은거라 부실이지만
그냥 올려봅니다.

그럼....

ps>

부팅 로그...
//===========================

U-Boot 1.1.6 (Sep 29 2007 - 14:27:18)

U-Boot code: 03680000 -> 036A432C  BSS: -> 036AAEA4
RAM Configuration:
Bank #0: 00000000 64 MB
Bank #1: 40000000 32 MB
NAND:  64 MiB
nand_read_ecc: from = 0x00040000, len = 16384
In:    serial
Out:   serial
Err:   serial
[ MAC : 08 00 3e 26 0a 5b ]
LCD divider = 4, rtc = 127586
### main_loop entered: bootdelay=2

### main_loop: bootcmd="tftp 02000000 mp2530; bootm 02000000"
Hit any key to stop autoboot:  0
AESOP2530> boot
[ MAC : 08 00 3e 26 0a 5b ]
Using MAC Address 08:00:3E:26:0A:5B
TFTP from server 172.16.1.249; our IP address is 172.16.1.100
Filename 'mp2530'.
Load address: 0x2000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###############################################################
done
Bytes transferred = 1653622 (193b76 hex)
## Booting image at 02000000 ...
   Image Name:   Linux-2.6.20
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    1653558 Bytes =  1.6 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 00008000) ...

Starting kernel ...

Linux version 2.6.20 (root@ghcdev) (gcc version 4.0.2) #78 Mon Oct 1 09:33:45 KST 2007
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: MP2530_MES_NAVIKIT
parse_tag_mem32 start 0, size 67108864
parse_tag_mem32 start 1073741824, size 33554432
Memory policy: ECC disabled, Data cache writeback
BUG: not creating mapping for 0x00000000 at 0x00000000 in user region
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists.  Total pages: 13970
Kernel command line: mem=55M root=/dev/nfs rw nfsroot=172.16.1.249:/root/mp2530/rootfs/AESOP ip=172.16.1.100:172.16.1.253:172.16.1.1:255.255.255.0::eth0:off console=ttySAC3,115200n81 ethaddr=08:00:3e:26:0a:5b
mp2530_init_irq: registering mp2530 interrupt handlers
mp2530: registered interrupt handlers
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 55MB = 55MB total
Memory: 52224KB available (2904K code, 514K data, 112K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
yaffs Oct  1 2007 09:30:55 Installing.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 200x80
fb0: mp2530f-fb frame buffer device
MP2530F Disp. Mem. Alloc. Driver
MP2530F DualCPU IF Driver
mp2530-uart.0: mp2530_serial0 at MMIO 0xf0016000 (irq = 42) is a MP2530
mp2530-uart.1: mp2530_serial1 at MMIO 0xf0016080 (irq = 46) is a MP2530
mp2530-uart.2: mp2530_serial2 at MMIO 0xf0016800 (irq = 50) is a MP2530
mp2530-uart.3: mp2530_serial3 at MMIO 0xf0016880 (irq = 54) is a MP2530
mp2530-uart.4: mp2530_serial4 at MMIO 0xf0017000 (irq = 58) is a MP2530
mp2530-uart.5: mp2530_serial5 at MMIO 0xf0017080 (irq = 62) is a MP2530
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre
No IRQF_TRIGGER set_type function for IRQ 9 (mp2530)
eth0: SMC91C11xFD (rev 2) at c3850300 IRQ 9
eth0: Ethernet addr: 08:00:3e:26:0a:5b
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
MP2530F IDE: driver is installed 0
Searching for NAND flash...
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 1636 at 0x01990000
Using static partition definition
Creating 1 MTD partitions on "mp2530f-nand":
0x00200000-0x00800000 : "mp2530f_nand_flash"
usbmon: debugfs is not available
mp2530f-hcd mp2530f-hcd.0: MP2530F OHCI
mp2530f-hcd mp2530f-hcd.0: new USB bus registered, assigned bus number 1
mp2530f-hcd mp2530f-hcd.0: irq 28, io mem 0xf000d000
usb usb1: Product: MP2530F OHCI
usb usb1: Manufacturer: Linux 2.6.20 ohci_hcd
usb usb1: SerialNumber: mp2530f
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using mp2530f-hcd and address 2
usb 1-1: Product: CS8819A2-108
usb 1-1: Manufacturer: Myson Century, Inc.
usb 1-1: SerialNumber: 100
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
initialization done.
ac97_codec: AC97 Audio codec, id: WML18 (Wolfson WM9711/9712)
TCP cubic registered
NET: Registered protocol family 1
eth0: link down
IP-Config: Complete:
      device=eth0, addr=172.16.1.100, mask=255.255.255.0, gw=172.16.1.1,
     host=172.16.1.100, domain=, nis-domain=(none),
     bootserver=172.16.1.253, rootserver=172.16.1.249, rootpath=
Looking up port of RPC 100003/2 on 172.16.1.249
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 172.16.1.249
VFS: Mounted root (nfs filesystem).
Freeing init memory: 112K
scsi 0:0:0:0: Direct-Access     Myson    CS8819A2-108  0  1.01 PQ: 0 ANSI: 0 CCS
SCSI device sda: 1984512 512-byte hdwr sectors (1016 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 1984512 512-byte hdwr sectors (1016 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda:<7>eth0: spurious interrupt (mask = 0xb3)
sda1
sd 0:0:0:0: Attached scsi removable disk sda
INIT: version 2.86 booting
Initializing udev dynamic device directory.
mount: Mounting /dev/root on / failed: No such file or directory
INIT: Entering runlevel: 3
[: 0: unknown operand


AESOP Linux

/) /)
(='.'=) <- godori

login[378]: root login  on `tts/3'

mount: Mounting /dev/mmcblk0p1 on /mnt failed: No such file or directory
root@godori:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00600000 00004000 "mp2530f_nand_flash"
root@godori:~# flash_eraseall /dev/mtd0
Erasing 16 Kibyte @ 5fc000 -- 99 % complete.
root@godori:~#
* 고도리님에 의해서 게시물 복사되었습니다 (2007-10-01 14:20)

이 게시물을