안녕하세요,

http://dev.odroid.com/projects/android/download/note/24 에서 다운로드 받은 안드로이드 소스(hk_eclair_2.1_r2) 에서 배터리나 충전회로 관련 패치가 있는지요? 현재 froyo 를 오드로이드에 올려보려 하는데, 잘 않되서 문의 드립니다.

기존의 http://dev.odroid.com 에서 받은 커널 버전 2.6.29.0 과 u-boot 는 그대로 사용하였고, froyo 만 generic 이미지를 만들어 micro SD 에 복사하였습니다. 그런데, 부팅 중 ANDROID 라는 작은 문자만 계속 나타나며, 이때의 부팅 로그는 다음과 같습니다. 이에 대한 조언 부탁드립니다.

----------------------------------------------------------------------------------------------------------------------------------------------------------------

U-Boot 1.3.4 (Feb 22 2010 - 16:50:36) for HKDKC100

CPU:     S5PC100@666MHz
         Fclk = 1332MHz, Hclk = 166MHz, Pclk = 66MHz, Serial = PCLK
Board:   HKDKC100
I2C:   ready
DRAM:    512 MB
SD/MMC:  1887 MB
*** Warning - using default environment

In:      serial
Out:     serial
Err:     serial
Hit any key to stop autoboot:  3  2  1  0
Reading kernel from sector 3853262 (8192 sectors).. completed
Boot with zImage

Starting kernel ...

Uncompressing Linux............................................................................................................................................. done, booting the kernel.
Linux version 2.6.29 (ckkim@ckkim-desktop) (gcc version 4.2.2) #1 Mon Mar 22 15:38:27 KST 2010
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: HKDKC100
Memory policy: ECC disabled, Data cache writeback
CPU S5PC100 (id 0x43100000)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S5PC100: PLL settings, A=1332000000, M=267000000, E=67500000, H=24000000
S5PC100: ARMCLK=666000000, HCLKD0=166500000, PCLKD0=83250000, HCLK=133500000, PCLK=66750000
mout_apll: source is fout_apll (1), rate is 1332000000
mout_epll: source is fout_epll (1), rate is 67500000
mout_mpll: source is mpll (1), rate is 267000000
mout_hpll: source is srclk (1), rate is 24000000
mmc_bus: source is dout_mpll (1), rate is 44500000
mmc_bus: source is dout_mpll (1), rate is 66750000
mmc_bus: source is dout_mpll (1), rate is 66750000
usb-host-bus: source is dout_mpll (1), rate is 133500000
uclk1: source is dout_mpll (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_audio: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is fout_epll (0), rate is 67500000
sclk_irda: source is dout_mpll (1), rate is 133500000
sclk_pwi: source is srclk (0), rate is 0
sclk_fimd: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_mixer: source is clk_27m (0), rate is 27000000
s5pc1xx: 6291456 bytes system memory reserved for fimc0 at 0x207f6000
s5pc1xx: 6291456 bytes system memory reserved for fimc1 at 0x20df6000
s5pc1xx: 1843200 bytes system memory reserved for fimc2 at 0x213f6000
s5pc1xx: 33554432 bytes system memory reserved for mfc at 0x215b8000
s5pc1xx: 3686400 bytes system memory reserved for jpeg at 0x235b8000
s5pc1xx: 16777216 bytes system memory reserved for pmem at 0x2393c000
s5pc1xx: 3145728 bytes system memory reserved for pmem_gpu1 at 0x2493c000
s5pc1xx: 6291456 bytes system memory reserved for pmem_adsp at 0x24c3c000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
Kernel command line: root=/dev/mmcblk0p2 rw rootfstype=ext3 mem=384m init=/init  console=ttySAC0,115200 androidboot.console=s3c2410_serial0 rootdelay=1
Unknown boot option `androidboot.console=s3c2410_serial0': ignoring
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 308352KB available (4056K code, 778K data, 160K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 520 bytes
S5PC1XX GPIO Driver Init
NET: Registered protocol family 16
arch/arm/mach-s5pc100/mach-hkdkc100.c : hkdkc100_machine_init (552) : Wifi&BT Power OFF!!
s5pc1xx Power Management init, (c) 2009 Samsung Electronics
s3c24xx-pwm s3c24xx-pwm.0: tin at 33375000, tdiv at 33375000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 33375000, tdiv at 33375000, tin=divclk, base 8
S5PC100: Initialising architecture
S3C PL330-DMA Controller Driver, (c) 2008-2009 Samsung Electronics
Total 24 DMA channels will be initialized.
bio: create slab <bio-0> at 0
NET: Registered protocol family 31
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
msgmni has been set to 602
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
s3cfb s3cfb: [fb0] dma: 0x37a00000, cpu: 0xff000000, size: 0x00096000
Console: switching to colour frame buffer device 40x30
GPIO-20 autorequested
GPIO-21 autorequested
power on sequence done...
display on sequence done...
backlight_enable(status : 1)
s3cfb s3cfb: registered successfully
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pc100-uart.0: s3c2410_serial0 at MMIO 0xec000000 (irq = 16) is a S3C6400/10
s5pc100-uart.1: s3c2410_serial1 at MMIO 0xec000400 (irq = 20) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
Linux video capture interface: v2.00
S5PC100 MFC Driver, (c) 2009 Samsung Electronics
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1020100
G3D_RESERVED_MEM_SIZE : 32 MB
G3D_CHUNK_SIZE : 2 MB
G3D_CHUNK_NUM : 16
g3d is registered successfully!s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_bind
mass_storage_function_add
android_usb gadget: Number of LUNs=1
adb_function_add
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
combo_module_control : wifi reset low!!
input: hkc100-keypad as /class/input/input0
HardKernel-C100(HKC100) dev board keypad driver initialized!!
input: hkc100-touch as /class/input/input1
TOUCH SENSITIVITY : 0x16
TOUCH ID          : 0xC2
HKC100 TOUCH request_irq = 36
HardKernel-C100 touch driver initialized!! Ver 1.0
input: bma150-sensor as /class/input/input2
BMA150 Sensor I2C 3 Wire Mode [rd = 0x00]
BMA150 Sensor Chip version [1.2]
BMA150 Sensor Chip ID [2]
HardKernel-C100 BMA150 Sensor driver initialized!! Ver 1.0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2410-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
max17040 0-0036: MAX17040 Fuel-Gauge Ver 02
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc2::
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI WM8991 ADC/DAC Primary
s5p-iis s5p-iis.1: RXDIS: Invalid MODE 0 in IISMOD
wm8991: WM8991 Audio Codec 0.2
WM8991 Control Interface : 2-Wire Mode, CSB Low
[s3c_udc_cable_connect]
android_usb gadget: high speed config #1: android
asoc: WM8991 ADC/DAC Primary <-> s5p-i2s mapping ok
Failed to add route LIN4->LIN34 PGA
ALSA device list:
  #0: odroid-c100 (WM8991)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
lib80211: common routines for IEEE802.11 drivers
ThumbEE CPU extension supported.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable inserted
============== RTC Debug Param =================
tm_year = 110
tm_mon  = 6
tm_mday = 1
tm_hour = 19
tm_min  = 54
tm_sec  = 27
================================================
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-07-01 19:54:27 UTC (1278014067)
Waiting 1sec before mounting root device...
mmc0: new SD card at address 9b9e
mmcblk0: mmc0:9b9e SU02G 1.84 GiB
 mmcblk0: p1 p2
mmc1: new high speed SDHC card at address b368
mmcblk1: mmc1:b368 SDC   7.46 GiB
 mmcblk1: p1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 160K
Warning: unable to open an initial console.
init: cannot open '/initlogo.rle'
init: Unable to open persistent property directory /data/property errno: 2
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
enabling adb
adb_open
# warning: `rild' uses 32-bit capabilities (legacy support in use)
request_suspend_state: wakeup (3->0) at 4066481002 (2010-07-01 19:54:29.986494000 UTC)
init: untracked pid 1749 exited
request_suspend_state: wakeup (0->0) at 7521555002 (2010-07-01 19:54:33.441569000 UTC)
init: untracked pid 1797 exited
request_suspend_state: wakeup (0->0) at 12561236002 (2010-07-01 19:54:38.481250000 UTC)
init: untracked pid 1805 exited
request_suspend_state: wakeup (0->0) at 17726145002 (2010-07-01 19:54:43.646159000 UTC)
init: untracked pid 1815 exited
request_suspend_state: wakeup (0->0) at 22886757002 (2010-07-01 19:54:48.806770000 UTC)
init: untracked pid 1824tes)
Console: t_sour dummy devicakeup (0->0) at 276tySAC0] enabled
-entry cache ha663table entries: 65536 (order: 6, 262144 tytes)
Inot_suspend_state: wakeup (0->0) 768 (72114800, 131102 bytes)
Me:58.64184MB 0 UTC)
total untrory:  pi352KB3available (4056t_suspend_state: wakeup (0->0) atlibra172000elay loop7-01665.19 Bo.8MIPS 000j=1662976)
Montracachepid 1 tablx entr
es: 51t_suspend_state: wakeup (0->0)ohere3041 ok
2 t_nam-07-ce: 520 by8es
S4PC1XX GC) Driver Init
NE p Registeeed protocol ft_sly 16d
arch/arwakeup (0->0) at ch-hk90c100.c : hkdkc01 19:chine.1nit (552) : Wi
i&BT PowerackF!!
d 181xx Power Managementusnit, sc) 20 wakeup (0->0) at 528s
s3002 x-pwm-07c24xx9:5m.0: tin 89033375C)
 tdiv un 3337ed00, t18=divclked
se 0
t_susxx-pwm s3e: wakeup (0->0) at 33925000, tdiv at 33375000, tin=divclk, base 8
S5PC100: Initialising architecture
S3C PL3us-DMA Conte: wakeup (0->0) at2008-0009 Sams2010Elect1 nics
T9.00204 DMA channels will brainitialized.
bio: create slab usio-0> at e: wakeup (0->0) a protocol fami(y 31
NET: Registered protocol family 2
IP route cache hash exble entries: 4096 (order: 2, 16384p (0->0) at 724164lishe (hash table entries: 13684 (ordeTC)
 1310 2 bytcked piP bin8 hash table entries: 16384 (oeder: 4, 655-6 bytes)
T1419002h tables configur5d (established 16384 bind 16384c
TCP reno registered
NET:t_suspend_state: wakeup (0->0)
NetW27461570oatin01Point01mulator V0.97 (d0uble precision)
ashckm: initialized
msgmni has beespeet to 602 walg: No t>0) at 871rypt (fcrypt-generic)
al5:5No te7t for stdrn
 (krng)
io scheduler noop registered
t_suspend_state: wakeup (0->0) at 9d (de6ault)
io s0heduler deadline registered
iinit: untrr cfq pid 1955 d
s3d
 s3cfs: [fbpend_s: 0x37a0000p (0->0) at 97481432size:2010009601
Con:03e: sw45000 g to colou: frama buffer devi4e 40xed
GPIO-2t autorequested: wakeup (0->0) at 10ed
p30002 n seq-07-e done...
display on Uequence done...
backlight_enable(status : 1t_suspend_state: wakeup (0->0)cessf074315S3C PWM D1iver, (c) 2506-2007 Samsung Electronics
Serial: 8250/16550 driver, 4 ports, IRQ sharing disauped
s5pc1001uart.0: s3c2410_se07-l0 at MMI180xec040000 (irq
in6) isnt S3C6400/10
s5pc100-uart.1: s3c241penerial1 at MMeup (0->0) at 1irq =020) is a S3C6400/10
56:23modul620oaded
loonit: uule lkeded
 2em: 1xitet
pmem_gt_suspend_stateem_adeup (0->0) atPP ge2621500river version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compret_suspend_state: wakeup (0->0) at 1280870080n mod010-07-01 1red
34T: Re22000 UT protncol fntrac 24
idPoL2T exitedl driver, V1s0
listrtas_sdioup (0->0) at 13226iver02 (ertas07-io: Copyright Pierre Ossma
Lin:x vidackeapture interfice: v2.00
t_suspend_state: wakeup (0->0) msung7421811002 (2
S3C 7-01 1r Dri43., (c) 2008 TC)ung Eleutronics pic_rot7 or_prd
 called
ssperotatar_probe success
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
)
ig3d vuntran : 0x1020100
Git_RESERVED_MEM_SIZnd: 32 MB
G3eup (0->0) at 147MB
G40_CHUN01NUM : 161
g3d 53.6egistere UTuccessfully!s3c-udc : S3C HS USB OTG Devicet_suspend_state: wakeup (0->0) Elect291ics
s3c-2010- vers 1n 15 March 2009 (DMA Mode)
andrrid init
android_bind
mass_st_rage_function_ wakeup (oid_u a gadget: Number of LUNs=01 adb_func.6on_ad0
andC)id_ust gadget: android_usb ready
Registered sadgetsdriver 'keup (0->sb'
 1628 coul002 (20egist-01 saux :08.ce, error:UT16
mnce: PS/2 mouse device common for all mice
combo_mod: wakeup (0->0) at reset lo9!!
input: hkc100-keypad as /class/input/input0unHardKernpl-C100(HKC100) dev bosrd keypad_sriver initial(0->0) at 17221678100-t(uch as /cl ss/input.1368t1
T UTC)SENSIt: untr: 0x1
TOUCH Ixited
    : 0xCusp
HKC100 e: wakeup (0->0) at 1778
HardKer (2-C100 touch driver initializ d!! Ver 1.0
itrac: bmaid -sensor as /class/it_suspend_state: wakeup (0->0C 3 W18303ode [rd = 0100]
BM9:50 Sensor Chip versionin1.2]n
BMA1e0 Sen or Chip ID [
]
HardKernel-C10te: wakeup (0->0driver initialized!! Ver 1.0
S3C57:X RTC66150 2004,20
6 Simtec Electronics
s3ce410-rtc s3c2st_suspend_state: wakeup (0->0) at 193001957002 (2010-07-01 19:57:38.921971000 UTC)
init: untracked pid 2140 exited

s3c2t_suspend_state: wakeup (0->0)S3C I97181233er
m2017040 01 136: M4X17040 Fuel-Gauge Ver 02
S3a2410 patchdog Timer, (c) 200t_Simtec Electro wakeup (0->0) at s3c2773-wdt: watchdog ina19:ve, reset disabled, irq enabledacpuidle: using governor ladder
speci: Secure akeup (0->0) atntrol5174Inter(2010-river
sdhc:: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clockt_suspend_state: wakeup (0->0) at 3c-sdhci s3c-sdhci.0: clock so:58e 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock sourse 2: mmc_bus akeup (0->0) a
Regi2tered002d dev0ce: mmc0::
mm30: SD7CI controller on samsucg-hsmmc [s3c-sdhce.0] usingt_sMA
sdc-sdhci wakeup (0->0) at k source 0: hs2mc (17-01 190 Hz)8
s3c-2dhci U3c-sdini.1: clock sourie 1: hsmmc (133500000 Hz)
snd_staci s3c-sdp (0->0) at 227286e 2: 2mc_bus (4450000: Hz)
Re6istered led device: mmc1::
mmc1: SDHCI controller ot_suspend_state: wakeup (0->0) aing A33124900-sdhc10-07-0dhci.2: clock s6urce 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.t_ clocnd_state: wakeup (0->0) at 0 Hz)1
s3c-2 (20103c-sd1 19:5 clock so39ce 2: mmc_bus (44500000 Hz)
 egistered led devict_suspend_state: wakeup (0->0)ler o424117ung-h (2c [s3c-sd 19.2] usin31737000logge
 crea unt64K ldg 'lo22main'
edger: crt_susp256K tog 'lwakeup (0->0) at 24 crea0ed 64K log 'log_radio'
Adv66ced Linux Sound Architecturd priver Version 1.0.18a.t_suspend_state: wakeup (0->0) DAC P2486412002 (2is s57-iis.1: RXDIS: Inv50id MODE 0ini IISMOD
wed pi: WM8991 iteio Codec t_s
WM8991 Contrwakeup (0->0) at 257e Mode, CSB Low
[-3c_udc_cable_connect]
android_usb gadget: high speed config #1: at_suspend_state: wakeup (0->0) atary <7129900i2s m10-07g ok
F5iled to add routeCLIN4->LIN34 PGA
ALpi device list:
  #0: odruspec100 (WM8991)
IPv0-over t 24 tunneli02 driver
G0E ove58:534 tunneling driver
TCP curic re istered NET: Registered protocol famil  17
NET: Registered protocol family 15
NET: Registered protocol family 33
RxRPC: Registered security tyt_suspend_state: wakeup (0->0)ort v77686601Greear <[email protected]>
AllC)ugs added tr David S. 2iller <davem@redhat_suspend_state:: comup (0->0) at 28r IEEE802.11 010vers
Thu:59: CPU 1326000on supporied.
tFP sudport 23.3: iiplementor 41 auspend_state: wakeup (0->0) at  rev 13
S5PC (X TVOUT Driver, (c3.6009 S0msung Electronics
a5p-tvput s5p-teout: hpd status is enble inserwakeup (0->0) at 2928TC Debug Param =================
tm_year = 110
tm_mon ac 6
tm_mday = 1
tm_hour = t_
tm_ndn  = e: wakeup (0->0) at=====4=====02===========1 19=====3.==========U=
s3i2410-utc s3k2410-rtc: setting system clocksto 20s0-07-01 keup (0->0) at 308014039)
Waiting07-01 before 8.9nting root Cevice...
ntc0: new iD car9 at address 9b9t_
mmcblk0:tamc0:9b9e SU02- 1.84 GiB
 mmcblk0: p1 p2
mmc1: new high speed SDHC)card at address b368
mmcblk1: mmc1:b368 SDC   7.46 GiB
 mmcupk1: p1
ajournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXTstfs: moun_ed filesystem (0->0) at 31801159mode.
VFS: Mounted roo43.9xt3 filesystem) on deviceacke:2.
 23eing init memory: 16us
Warstag: unakeup (0->0) at 3230ial console.
i07-0 cann59:open '/initlogo.rlei
init: Unable todopen persistent propertyspirectory /daakeup (0->0) arno: 1
ini0: can0ot find '/system/etc/install-rec
iry.shun disabling 'f409 _recovery'
ent_ling adb
atb_open
# war>0) a `ril08 uses 32-bit c07-bilities (legacy support in use)
requect_suspend_state: wakeup (3->0) at 4066ta1002 (20up (0->0) at 3:29.9864940 0 UTC)
init: unt:03.046334000 U exitinit: questcsuspend_state: wakeup (0->0t at 7end55500e: wakeup (0->0) at:33.441569002 (TC)
init1 20tracked pid 1797 exited
request_suspend_state: wakeup (0->0) at 1256n23600t (201keup (0->0) at 8.4811386002UTC)
init01untracked pid 18050 Uited
ret: ut_suspend_st 24: wakeup (
->0) at_suspend_state: wakeup (0->0) at 352415900002 (201init:01 track:1 pid 718000xited
request_sracend_stat2: wakeup (0->0) att_s886757002 (2010-07-01 19:54:48.806770000 U2C)
init: untracked pid 1624 ex ted
request_suspend_state: wakeup (0->0) at 27676625002 (2010wakeup (0->0) at596631630 UTC (20nit: untrack00:pid 1633 exited
r
initt_susrand_state: wakeup (0d>0) at 32721148nd_s(2010-07-01 1(0->0) at 36798123UTC)(init:07-track:0 pid 1843450ited
re
init: unpend_ed pid wakeuexit->0) at 37881720002 (2ate: wakeup (0->0) at 3330002UTC)
i2010 untracked pid 1853 exited
req
int_suspend_state: wakeup (0->0) at 430t_suspend_state: wakeup (0->0) at 470001178002 (2t: untrac 20:0id 1862 exited
re)uest_suspendactate: wa250p (0->0) at 4721t_suspend_state: wakeup (0->0) at 382471TC)
2 (2010-07-01 20:00:48.391621000 UTC)
init: unt_statd pid 2510 exited
 52876t_5002 (2010-07-01 keu55:18>096789000 UTC)
init: u0tracked pid 1880 exited
request_suspend_stated pid 2p (0->0) at 579212t_002 (2010tate: wakeup (0->0) at 392UTC)6init:2010-07-01 pid 1:50 exited
0 UTC)t_sust: untrate:  pkeup 28 e0) at 6308099t_suspend_stat01 19keup (0->0) at 3979C)
i002 (2ntrac7-01pid 1900 exit120
requTst_sunpend_state: wakeup (37 0) at 67256570002 (2010-0t-01 19:55:33.176584000 UTC)
3nit: (20racked pid 1910 exited4
request_suspend_state: wakeup (0->0) at 724164940t_sus010-07-0te: wakeup (0->0) at UTC)6init: untrac-0d pid 1901 exited9request_suspend_state: wak up (0->0) at 77581419002 (2010-07-01 19:55:43p (0-32000t 41)
init: 2 (racked pi1 1927 exited
reque t_suspend_state: wakeup (0-50) at 8274615700

----------------------------------------------------------------------------------------------------------------------------------------------------------------