기존 이솝 임베디드 포럼의 지식인 서비스가 게시판 형태로 변경되었습니다.

mboot까지 설정하고 마지막으로 이미지를 다운받을려고 하니까

아무 동작이 없네요...

설명서에는 tftp가 있어서 BOOTME를 기다리는 듯한데요...

아직 그런 메시지가 나오지 않습니다...

아시는분 계시면 답변 부탁드립니다.

수고하세요...

BSP Version: 1.1.2

AESOP MP2530 Boot Loader Configuration

IP: 192.168.0.30, Subnet mask: 255.255.255.0
LAN91C111 MAC address: 0:11:22:33:44:55, DHCP: Disabled
Write to NAND: Disabled, Reserved Image Area: 32 MB
Auto Boot: Download, Download Through Ethernet

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 0 seconds.

Starting auto-download ...
+InitEthDevice.
INFO : Ethernet : VA[b0300300], PA[85000300]
LAN91Cxxx: Chip Id 9 Revision 1
Before CleanUp
-InitEthDevice.
-- OEMPlatformInit.
System ready!
Preparing for download...
++ OEMPreDownload
+OALKitlCreateName('MP2530F', 0xc203c, 0x000c2014)
-OALKitlCreateName(pBuffer = 'MP2530F56746')
INFO: *** Device Name 'MP2530F56746' ***
INFO: Using static IP address 192.168.0.30.
INFO: Using subnet mask 255.255.255.0.

고현철

2008.04.07 07:51:04
*.187.44.115

수정사항 pds에 올렸습니다.

어떤 문제가 생긴 듯 한데(uartboot/nandboot) 다시 좀 디버깅을
해봐야할 듯 합니다.

이태간

2008.04.07 09:44:31
*.143.79.187

다시 한번 해봐야겠네요..

이태간

2008.04.14 04:27:23
*.143.79.187

오늘 다시 시간내서 하는데요..

LED에 불이 3개 들어오고

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Apr 7 2008 13:58:33
INFO:OALLogSetZones: g_oalLogMask: 0x8000000f
++ OEMPlatformInit.
+ReadBootConfig

BSP Version: 2.0.5

AESOP MP2530 Boot Loader Configuration

IP: 192.168.1.11, Subnet mask: 255.255.255.0
LAN91C111 MAC address: 0:11:22:33:44:55, DHCP: Disabled
Write to NAND: Disabled, Reserved Image Area: 32 MB
Auto Boot: Download, Download Through Ethernet

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 3 seconds.

Starting auto-download ...
+InitEthDevice.
INFO : Ethernet : VA[b0300300], PA[85000300]
LAN91Cxxx: Chip Id 9 Revision 1
Before CleanUp
-InitEthDevice.
-- OEMPlatformInit.
System ready!
Preparing for download...
++ OEMPreDownload
+OALKitlCreateName('MP2530F', 0xc203c, 0x000c2014)
-OALKitlCreateName(pBuffer = 'MP2530F56746')
INFO: *** Device Name 'MP2530F56746' ***
INFO: Using static IP address 192.168.1.11.
INFO: Using subnet mask 255.255.255.0.

이렇게 메시지가 나오고
Send BOOTME to 255.255.255.255 메시지가 나오지 않네요..

어디가 문제인지 알수 있나요?
List of Articles
번호 제목 글쓴이 날짜 조회 수sort

사용자 로그인