AESOP Embedded Forum : QandA - Arndale + MT-6620

Favorites

묻고답하기 : 임베디드 개발에 관한 질문과 답변을 얻을 수 있는 게시판 입니다.

기존 이솝 임베디드 포럼의 지식인 서비스가 게시판 형태로 변경되었습니다.

글 수 6,368

Arndale + MT-6620

조회 수 9355 추천 수 0 2012.12.08 04:55:22

nsys *.237.178.78 http://www.aesop.or.kr/index.php?mid=Board_Community_QandA&document_srl=94249

안녕하세요! Arndale 보드에 6620 관련해서 문의 드립니다.

일단 repo sync 한다음

-rwxrwxr-x 1 hsjung hsjung 3170696 12월 7 19:14 vendor_insignal_arndale_20121205_5bfcd73.run

-rwxrwxr-x 1 hsjung hsjung 1508083 12월 7 19:14 vendor_samsung_slsi_exynos5250_20121127_2c9e06c.run

요거 두개는 풀었구요.

./arndale_envsetup.sh

rm -rf out/target/product/arndale/root

rm -rf out/target/product/arndale/system

rm -rf out/target/product/arndale/data

rm -f out/target/product/arndale/ramdisk.img

rm -f out/target/product/arndale/ramdisk.img.ub

rm -f out/target/product/arndale/system.img

rm -f out/target/product/arndale/userdata.img

make kernel-binaries

make -j6

요렇게 하구요....

fastboot erase userdata

fastboot erase cache

fastboot flash kernel kernel/arch/arm/boot/zImage

fastboot flash ramdisk out/target/product/arndale/ramdisk.img.ub

fastboot flash system out/target/product/arndale/system.img

fastboot reboot

요렇게 해서 넣었습니다.

첫 부팅때

U-Boot 2010.12-dirty (Dec 07 2012 - 13:03:44) for Insignal Arndale

CPU: S5PC520 Rev1.0 [Samsung SOC on SMP Platform Base on ARM CortexA15]

APLL = 1400MHz, MPLL = 800MHz, EPLL = 96MHz, VPLL = 300MHz, BPLL = 666MHz

DRAM: 2047 MiB

TrustZone Enabled BSP

BL1 version: 20120430

PMIC: S5M8767

Checking Boot Mode ... EMMC4.41

REVISION: 1.0

NAME: S5P_MSHC0

[DEBUG] Partition Map ----

fwbl1: 0 to 29 ( 30 sectors, 15360KiB)

iram block: 30 to 61 ( 32 sectors, 16384KiB)

u-boot: 62 to 717 ( 656 sectors, 335872KiB)

TZSW: 718 to 1029 ( 312 sectors, 159744KiB)

env: 1030 to 1061 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 30 to 61 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

MMC Device 0: 3816 MB

[ERROR] response timeout error : 00000104 cmd 1

MMC Device 1: 0 MB

MMC Device 2 not found

*** Warning - using default environment

Hit any key to stop autoboot: 0

[DEBUG] Partition Map ----

fwbl1: 1 to 30 ( 30 sectors, 15360KiB)

iram block: 31 to 62 ( 32 sectors, 16384KiB)

u-boot: 63 to 718 ( 656 sectors, 335872KiB)

TZSW: 719 to 1030 ( 312 sectors, 159744KiB)

env: 1031 to 1062 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 31 to 62 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

reading kernel..device 0 Start 1063, Count 32768

MMC read: dev # 0, block # 1063, count 32768 ... 32768 blocks read: OK

completed

[DEBUG] Partition Map ----

fwbl1: 1 to 30 ( 30 sectors, 15360KiB)

iram block: 31 to 62 ( 32 sectors, 16384KiB)

u-boot: 63 to 718 ( 656 sectors, 335872KiB)

TZSW: 719 to 1030 ( 312 sectors, 159744KiB)

env: 1031 to 1062 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 31 to 62 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

reading RFS..device 0 Count 33831, Start 2048

MMC read: dev # 0, block # 33831, count 2048 ... 2048 blocks read: OK

completed

Boot with zImage

## Loading init Ramdisk from Legacy Image at 41000000 ...

Image Name: Android Ramdisk Image

Image Type: ARM Linux RAMDisk Image (uncompressed)

Data Size: 167712 Bytes = 167712 Load Address: 40800000

Entry Point: 40800000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.0.31-g10fad59-dirty (hsjung@hsjung-desktop) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #2 SMP PREEM2

[ 0.000000] Ignoring unrecognised tag 0x00000000

[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set

[ 0.000000] audiocdclk: no parent clock specified

[ 0.000000] EXYNOS5: PLL settings, A=1400000000, B=1333090909, C=333000000

[ 0.000000] M=1600000000, E=96000000, V=300000000, G=533000000

[ 0.000000] EXYNOS5: ARMCLK=1400000000, CDREX=800000000, ACLK400=533000000

[ 0.000000] ACLK333=333000000, ACLK266=266666666, ACLK200=200000000

[ 0.000000] ACLK166=166500000, ACLK66=66666666

[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] uclk1: source is ext_xtal (0), rate is 6000000

[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666

[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000

[ 0.000000] aclk_266_gscl: source is aclk_266 (1), rate is 266666666

[ 0.000000] sclk_g3d: source is mout_mpll_user (0), rate is 800000000

[ 0.000000] sclk_sata: source is mout_mpll_user (0), rate is 66666666

[ 0.000000] sclk_gscl_wrap0: source is ext_xtal (0), rate is 24000000

[ 0.000000] sclk_gscl_wrap1: source is ext_xtal (0), rate is 24000000

[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000

[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000

[ 0.000000] S5P/CMA: No free space in memory for 'fimc_is'

[ 0.000000] PERCPU: Embedded 7 pages/cpu @c2036000 s7744 r8192 d12736 u32768

[ 0.000000] Kernel command line: console=ttySAC2,115200n8 vmalloc=512M androidboot.console=ttySAC2

[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Memory: 2047MB = 2047MB total

[ 0.000000] Memory: 1836764k/1836764k available, 259364k reserved, 1735680K highmem

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

[ 0.000000] DMA : 0xfea00000 - 0xffe00000 ( 20 MB)

[ 0.000000] vmalloc : 0xd6800000 - 0xf6000000 ( 504 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xd6000000 ( 352 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .init : 0xc0008000 - 0xc0048000 ( 256 kB)

[ 0.000000] .text : 0xc0048000 - 0xc0994000 (9520 kB)

[ 0.000000] .data : 0xc0994000 - 0xc09fe520 ( 426 kB)

[ 0.000000] .bss : 0xc09fe544 - 0xc0b95cf0 (1630 kB)

[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] Preemptible hierarchical RCU implementation.

[ 0.000000] NR_IRQS:552

[ 0.000000] Console: colour dummy device 80x30

[ 0.000000] Calibrating delay loop... 2795.11 BogoMIPS (lpj=6987776)

[ 0.045000] pid_max: default: 32768 minimum: 301

[ 0.045000] Mount-cache hash table entries: 512

[ 0.045000] Initializing cgroup subsys debug

[ 0.045000] Initializing cgroup subsys cpuacct

[ 0.045000] Initializing cgroup subsys freezer

[ 0.045000] CPU: Testing write buffer coherency: ok

[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available

[ 0.095000] Brought up 2 CPUs

[ 0.095000] SMP: Total of 2 processors activated (5590.22 BogoMIPS).

[ 0.095000] devtmpfs: initialized

[ 0.100000] gpio: GPZ has no PM function

[ 0.100000] print_constraints: dummy:

[ 0.100000] NET: Registered protocol family 16

[ 0.105000] SMDK MAIN Board Rev 0.2 (ADC value:881)

[ 0.115000] hw-breakpoint: debug architecture 0x5 unsupported.

[ 0.115000] exynos5_pmu_init: PMU supports 52XX(98)

[ 0.120000] EXYNOS5: Initializing architecture

[ 0.120000] s3c-adc samsung-adc-v4: attached adc driver

[ 0.120000] samsung-pd samsung-pd.0: power domain registered

[ 0.120000] samsung-pd samsung-pd.1: power domain registered

[ 0.120000] samsung-pd samsung-pd.8: power domain registered

[ 0.120000] samsung-pd samsung-pd.9: power domain registered

[ 0.120000] samsung-pd samsung-pd.10: power domain registered

[ 0.120000] samsung-pd samsung-pd.11: power domain registered

[ 0.120000] s3c24xx-pwm s3c24xx-pwm.0: tin at 66666666, tdiv at 66666666, tin=divclk, base 0

[ 0.120000] EXYNOS ASV PMIC MAXIM Detected!

[ 0.120000] EXYNOS5250 ASV : NZW25 IDS : 13 HPM : 12

[ 0.120000] VDD_ARM[SG NON-FUSED] ASV group is 4

[ 0.120000] VDD_INT[SG NON-FUSED] ASV group is 4

[ 0.120000] VDD_MIF[SG NON-FUSED] ASV group is 1

[ 0.120000] VDD_G3D[SG NON-FUSED] ASV group is 4

[ 0.140000] bio: create slab <bio-0> at 0

[ 0.140000] print_constraints: VDD_1.8V: 1800 mV

[ 0.140000] print_constraints: DC_5V: 5000 mV

[ 0.140000] print_constraints: VDD_3.3V: 3300 mV

[ 0.145000] SCSI subsystem initialized

[ 0.145000] usbcore: registered new interface driver usbfs

[ 0.145000] usbcore: registered new interface driver hub

[ 0.145000] usbcore: registered new device driver usb

[ 0.145000] s5m87xx 0-0066: S5M MFD Detected. DEVICE ID = 3

[ 0.150000] print_constraints: vdd_ldo4: 1800 mV

[ 0.150000] print_constraints: vdd_mif range: 950 <--> 1300 mV at 1100 mV

[ 0.150000] print_constraints: vdd_arm range: 800 <--> 1350 mV at 1200 mV

[ 0.150000] print_constraints: vdd_int range: 900 <--> 1200 mV at 1200 mV

[ 0.150000] print_constraints: vdd_g3d range: 700 <--> 1300 mV at 1200 mV

[ 0.150000] print_constraints: vdd_ldo11 range: 1900 mV

[ 0.150000] print_constraints: vdd_ldo14 range: 1900 mV

[ 0.150000] s5m87xx 0-0066: S5M87xx MFD probe done!!!

[ 0.150000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter

[ 0.150000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter

[ 0.155000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter

[ 0.155000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter

[ 0.155000] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter

[ 0.155000] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter

[ 0.155000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter

[ 0.155000] Advanced Linux Sound Architecture Driver Version 1.0.24.

[ 0.155000] Bluetooth: Core ver 2.16

[ 0.155000] NET: Registered protocol family 31

[ 0.155000] Bluetooth: HCI device and connection manager initialized

[ 0.155000] Bluetooth: HCI socket layer initialized

[ 0.155000] Bluetooth: L2CAP socket layer initialized

[ 0.155000] Bluetooth: SCO socket layer initialized

[ 0.155000] cfg80211: Calling CRDA to update world regulatory domain

[ 0.155000] Switching to clocksource mct-frc

[ 0.155126] Switched to NOHz mode on CPU #0

[ 0.159062] Switched to NOHz mode on CPU #1

[ 0.174276] NET: Registered protocol family 2

[ 0.174434] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)

[ 0.174984] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.175717] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[ 0.176428] TCP: Hash tables configured (established 65536 bind 65536)

[ 0.176436] TCP reno registered

[ 0.176444] UDP hash table entries: 256 (order: 1, 8192 bytes)

[ 0.176460] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[ 0.176662] NET: Registered protocol family 1

[ 0.176866] RPC: Registered named UNIX socket transport module.

[ 0.176874] RPC: Registered udp transport module.

[ 0.176880] RPC: Registered tcp transport module.

[ 0.176886] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.177006] Trying to unpack rootfs image as initramfs...

[ 0.183202] Freeing initrd memory: 160K

[ 0.183293] PMU: registered new PMU device of type 0

[ 0.183489] Exynos5 : ARM Clock down on idle mode is enabled

[ 0.183818] Loaded driver for PL330 DMAC-0 s3c-pl330

[ 0.183827] DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32

[ 0.183904] Loaded driver for PL330 DMAC-1 s3c-pl330

[ 0.183911] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.183993] Loaded driver for PL330 DMAC-2 s3c-pl330

[ 0.184000] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.193105] ashmem: initialized

[ 0.202147] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 0.203021] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.203870] NTFS driver 2.1.30 [Flags: R/W].

[ 0.204496] fuse init (API version 7.16)

[ 0.205215] msgmni has been set to 197

[ 0.208467] NET: Registered protocol family 38

[ 0.208492] io scheduler noop registered

[ 0.208499] io scheduler deadline registered

[ 0.208545] io scheduler cfq registered (default)

[ 0.420054] s5p-mipi-dsim s5p-mipi-dsim: DSI Master driver has been completed.

[ 0.420063] s5p-mipi-dsim s5p-mipi-dsim: DSI Master state is stop state

[ 0.692065] s5p-mipi-dsim s5p-mipi-dsim: mipi-dsi driver(RGB mode) has been probed.

[ 0.692442] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[ 0.760286] s5pv210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 16) is a S3C6400/10

[ 0.775067] s5pv210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 20) is a S3C6400/10

[ 0.795068] s5pv210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 24) is a S3C6400/10

[ 1.690838] console [ttySAC2] enabled

[ 1.705066] s5pv210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 28) is a S3C6400/10

[ 1.726947] mali mali-t604.0: Probed as mali0

[ 1.730590] UMP: UMP device driver r1p0-04rel0 loaded

[ 1.741573] brd: module loaded

[ 1.746397] loop: module loaded

[ 1.748097] i2c i2c-5: mpu_probe: 0

[ 1.751547] <6>mldl_cfg:Reset MPU6050 B1

[ 1.863037] i2c i2c-5: Installing irq using 458

[ 1.866100] i2c i2c-5: Module Param interface = mpuirq

[ 1.871550] i2c i2c-5: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68 IRQ: 458, Adapt: 5

[ 1.879790] i2c i2c-5: Installing accelirq irq using 458

[ 1.885085] ======================== probe done ===================

[ 1.891245] i2c-core: driver [mpu6050B1] using legacy suspend method

[ 1.897468] i2c-core: driver [mpu6050B1] using legacy resume method

[ 1.903716] mpu_init: Probe name mpu6050B1

[ 1.907959] i2c i2c-5: ak8975_mod_probe: ak8975

[ 1.912293] i2c i2c-5: inv_mpu_register_slave: +ak8975 Type 2: Addr: c IRQ: 453, Adapt: 5

[ 1.920779] ===================== ak8975_init :: 87 ====================

[ 1.927508] ===================== ak8975_init :: 98 ====================

[ 1.934760] i2c i2c-5: Installing compassirq irq using 453

[ 1.939717] ak8975_mod_init: Probe name ak8975_mod

[ 1.947448] ahci ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode

[ 1.953720] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst

[ 1.961910] scsi0 : ahci_platform

[ 1.964896] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122fffff] port 0x100 irq 179

[ 1.973007] usbcore: registered new interface driver asix

[ 1.978054] usbcore: registered new interface driver cdc_ether

[ 1.983826] usbcore: registered new interface driver net1080

[ 1.989435] usbcore: registered new interface driver cdc_subset

[ 1.995359] usbcore: registered new interface driver zaurus

[ 2.000782] cdc_ncm: 04-Aug-2011

[ 2.004083] usbcore: registered new interface driver cdc_ncm

[ 2.009665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 2.016313] s5p-ehci s5p-ehci: S5P EHCI Host Controller

[ 2.021330] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[ 2.028377] s5p-ehci s5p-ehci: irq 135, io mem 0x12110000

[ 2.040055] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[ 2.044481] hub 1-0:1.0: USB hub found

[ 2.047717] hub 1-0:1.0: 3 ports detected

[ 2.052150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 2.057902] s5p-ohci s5p-ohci: Already power on PHY

[ 2.062714] s5p-ohci s5p-ohci: s5p OHCI

[ 2.066528] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[ 2.073548] s5p-ohci s5p-ohci: irq 135, io mem 0x12120000

[ 2.134537] hub 2-0:1.0: USB hub found

[ 2.136828] hub 2-0:1.0: 3 ports detected

[ 2.141367] exynos-xhci exynos-xhci: EXYNOS xHCI Host Controller

[ 2.146801] exynos-xhci exynos-xhci: new USB bus registered, assigned bus number 3

[ 2.154547] exynos-xhci exynos-xhci: irq 136, io mem 0x12000000

[ 2.160744] hub 3-0:1.0: USB hub found

[ 2.163934] hub 3-0:1.0: 1 port detected

[ 2.168151] exynos-xhci exynos-xhci: EXYNOS xHCI Host Controller

[ 2.173839] exynos-xhci exynos-xhci: new USB bus registered, assigned bus number 4

[ 2.181894] hub 4-0:1.0: USB hub found

[ 2.185117] hub 4-0:1.0: 1 port detected

[ 2.189406] Initializing USB Mass Storage driver...

[ 2.194019] usbcore: registered new interface driver usb-storage

[ 2.199836] USB Mass Storage support registered.

[ 2.204657] s3c-udc : version 15 March 2009

[ 2.218608] android_usb gadget: Mass Storage Function, version: 2009/09/11

[ 2.224019] android_usb gadget: Number of LUNs=1

[ 2.228621] lun0: LUN: removable file: (no medium)

[ 2.233893] android_usb gadget: android_usb ready

[ 2.238155] Registered gadget driver 'android_usb'

[ 2.242966] s3c-usbgadget s3c-usbgadget: Already power on PHY

[ 2.250052] mousedev: PS/2 mouse device common for all mice

[ 2.254812] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0

[ 2.262248] s3c-rtc exynos-rtc: rtc disabled, re-enabling

[ 2.266406] s3c-rtc exynos-rtc: rtc clk out disabled, re-enabling

[ 2.272848] using rtc device, s3c, for alarms

[ 2.276638] s3c-rtc exynos-rtc: rtc core: registered s3c as rtc0

[ 2.282913] i2c /dev entries driver

[ 2.287468] Linux media interface: v0.10

[ 2.290065] ata1: SATA link down (SStatus 0 SControl 300)

[ 2.295650] Linux video capture interface: v2.00

[ 2.306122] s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6

[ 2.312054] s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7

[ 2.318428] exynos-mdev.0: Media0[0xcba3e400] was registered successfully

[ 2.324887] exynos-mdev.1: Media1[0xcba3dc00] was registered successfully

[ 2.331637] exynos-mdev.2: Media2[0xcba3d400] was registered successfully

[ 2.340816] [DBG] fimc_is_front_probe

[ 2.343144] [ISC] fimc_is_init_mem - ION

[ 2.346914] [ISC] Allocating memory for FIMC-IS firmware.

[ 2.356443] [ISC] Device vaddr = c0000000 , size = 00a00000

[ 2.360074] usb 1-3: new high speed USB device number 2 using s5p-ehci

[ 2.367071] [ISC] Virtual address for FW: d6e61000

[ 2.395566] [ISC] fimc_is_init_mem done

[ 2.397941] [DBG] fimc_is_sensor_init_formats

[ 2.402269] [DBG] fimc_is_sensor_subdev_registered

[ 2.407035] [DBG] fimc_is_front_init_formats

[ 2.411279] [DBG] fimc_is_front_subdev_registered

[ 2.415962] [DBG] fimc_is_front_init_formats

[ 2.420203] [DBG] fimc_is_back_subdev_registered

[ 2.424783] [SCC] fimc_is_scc_video_probe

[ 2.429236] [SEN] fimc_is_sensor_video_probe

[ 2.433206] [ISP] fimc_is_isp_video_probe

[ 2.437669] [DBG] fimc_is_probe : fimc_is_front_-1 probe success

[ 2.443329] i2c i2c-2: attached exynos hdcp into i2c adapter successfully

[ 2.449869] i2c-core: driver [exynos_hdcp] using legacy suspend method

[ 2.456264] i2c-core: driver [exynos_hdcp] using legacy resume method

[ 2.470504] s5p-hdmi exynos5-hdmi: hdmiphy i2c bus number = 8

[ 2.476335] s5p-hdmiphy 8-0038: probe successful

[ 2.495890] hub 1-3:1.0: USB hub found

[ 2.498235] hub 1-3:1.0: 3 ports detected

[ 2.590198] s5p_hpd_kobject_uevent: sent uevent HDMI_STATE=online

[ 2.594824] s5p-hdmi exynos5-hdmi: HDMI interrupt source is changed : internal

[ 2.602110] s5p-hdmi exynos5-hdmi: probe sucessful

[ 2.614511] s5p-mixer s5p-mixer: probe start

[ 2.618455] s5p-mixer s5p-mixer: resources acquired

[ 2.623283] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'

[ 2.631610] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16

[ 2.638666] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17

[ 2.645811] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18

[ 2.652892] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19

[ 2.659827] s5p-mixer s5p-mixer: mixer0 create links

[ 2.664769] s5p-mixer s5p-mixer: mixer1 create links

[ 2.669708] s5p-mixer s5p-mixer: mixer links are created successfully

[ 2.676115] s5p-mixer s5p-mixer: probe successful

[ 2.681189] s5p-tvout-cec s5p-tvout-cec: probe successful

[ 2.686352] exynos-rot exynos-rot: ++rot_probe

[ 2.690806] exynos-rot exynos-rot: rotator registered successfully

[ 2.696875] Initialize JPEG driver

[ 2.700356] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12

[ 2.706961] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11

[ 2.719940] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe

[ 2.733030] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled

[ 2.741145] device-mapper: uevent: version 1.0.3

[ 2.745372] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]

[ 2.753497] Bluetooth: HCI UART driver ver 2.2

[ 2.757846] Bluetooth: HCI H4 protocol initialized

[ 2.762614] Bluetooth: HCI BCSP protocol initialized

[ 2.767572] Bluetooth: HCILL protocol initialized

[ 2.772236] Bluetooth: HCIATH3K protocol initialized

[ 2.777647] cpuidle: using governor ladder

[ 2.781895] cpuidle: using governor menu

[ 2.785332] dw_mmc dw_mmc.0: Using internal DMA controller.

[ 2.790722] mmc0: no vmmc regulator found

[ 2.794911] dw_mmc dw_mmc.0: Version ID is 241a

[ 2.799195] dw_mmc dw_mmc.0: DW MMC controller at irq 139, 32 bit host data width, 128 deep fifo

[ 2.808058] dw_mmc dw_mmc.2: Using internal DMA controller.

[ 2.813522] mmc1: no vmmc regulator found

[ 2.815107] usb 1-3.2: new high speed USB device number 3 using s5p-ehci

[ 2.824186] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)

[ 2.833876] dw_mmc dw_mmc.2: Version ID is 241a

[ 2.838125] dw_mmc dw_mmc.2: DW MMC controller at irq 141, 32 bit host data width, 128 deep fifo

[ 2.846926] dw_mmc dw_mmc.1: Using internal DMA controller.

[ 2.852416] mmc2: no vmmc regulator found

[ 2.856616] dw_mmc dw_mmc.1: Version ID is 241a

[ 2.860909] dw_mmc dw_mmc.1: DW MMC controller at irq 140, 32 bit host data width, 128 deep fifo

[ 2.869785] sdhci: Secure Digital Host Controller Interface driver

[ 2.875816] sdhci: Copyright(c) Pierre Ossman

[ 2.879193] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)

[ 2.880216] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)

[ 2.880441] mmc0: new high speed DDR MMC card at address 0001

[ 2.905510] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB

[ 2.909983] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB

[ 2.915929] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB

[ 2.927019] ACE: ecb-aes-s5p-ace

[ 2.930286] ACE: cbc-aes-s5p-ace

[ 2.931271] mmcblk0: p1 p2 p3 p4

[ 2.936761] ACE: ctr-aes-s5p-ace

[ 2.939001] mmcblk0boot1: unknown partition table

[ 2.944733] ACE: sha1-s5p-ace

[ 2.947688] ACE: sha256-s5p-ace

[ 2.948231] mmcblk0boot0: unknown partition table

[ 2.955481] ACE driver is initialized

[ 2.959579] usbcore: registered new interface driver usbhid

[ 2.963070] hub 1-3.2:1.0: USB hub found

[ 2.963376] hub 1-3.2:1.0: 4 ports detected

[ 2.972733] usbhid: USB HID core driver

[ 2.976949] logger: created 256K log 'log_main'

[ 2.981219] logger: created 256K log 'log_events'

[ 2.985851] logger: created 256K log 'log_radio'

[ 2.990095] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)

[ 2.999930] logger: created 256K log 'log_system'

[ 3.030122] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 392157Hz, actual 390625HZ div = 64)

[ 3.104924] asoc: alc5631-hifi <-> samsung-i2s.0 mapping ok

[ 3.109755] ALSA device list:

[ 3.111974] #0: Origen

[ 3.114520] GACT probability NOT on

[ 3.118010] Mirror/redirect action on

[ 3.121592] u32 classifier

[ 3.124262] Actions configured

[ 3.127659] Netfilter messages via NETLINK v0.30.

[ 3.132371] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[ 3.139108] ctnetlink v0.93: registering with nfnetlink.

[ 3.143730] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[ 3.156842] xt_time: kernel timezone is -0000

[ 3.161590] IPv4 over IPv4 tunneling driver

[ 3.165867] GRE over IPv4 demultiplexor driver

[ 3.169154] GRE over IPv4 tunneling driver

[ 3.183563] TCP cubic registered

[ 3.186749] Initializing XFRM netlink socket

[ 3.191677] NET: Registered protocol family 10

[ 3.199298] Mobile IPv6

[ 3.205822] IPv6 over IPv4 tunneling driver

[ 3.214301] NET: Registered protocol family 17

[ 3.217289] NET: Registered protocol family 15

[ 3.221834] Bridge firewalling registered

[ 3.225766] Bluetooth: RFCOMM socket layer initialized

[ 3.230800] usb 1-3.2.3: new low speed USB device number 4 using s5p-ehci

[ 3.230858] Bluetooth: RFCOMM ver 1.11

[ 3.230866] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 3.230873] Bluetooth: BNEP filters: protocol multicast

[ 3.230882] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[ 3.250852] L2TP core driver, V2.0

[ 3.250859] L2TP IP encapsulation support (L2TPv3)

[ 3.250897] L2TP netlink interface

[ 3.250950] L2TP ethernet pseudowire support (L2TPv3)

[ 3.250987] NET: Registered protocol family 35

[ 3.251133] 802.1Q VLAN Support v1.8

[ 3.251171] lib80211: common routines for IEEE802.11 drivers

[ 3.252178] rfkill_gpio rfkill_gpio: arndale-bt device registered.

[ 3.252606] Registering the dns_resolver key type

[ 3.252636] EXYNOS5250: Adaptive Support Voltage init

[ 3.252648] EXYNOS5250(NO SG): IDS : 13 HPM : 12 RESULT : 4 MIF : 1

[ 3.252656] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0

[ 3.317633] Registering SWP/SWPB emulation handler

[ 3.322346] DVFS : VDD_ARM Voltage table set with 4 Group

[ 3.327683] VDD_ARM : L0, 0 uV

[ 3.330738] VDD_ARM : L1, 0 uV

[ 3.333739] VDD_ARM : L2, 0 uV

[ 3.336807] VDD_ARM : L3, 0 uV

[ 3.339805] VDD_ARM : L4, 0 uV

[ 3.342849] VDD_ARM : L5, 1250000 uV

[ 3.346417] VDD_ARM : L6, 1200000 uV

[ 3.349946] VDD_ARM : L7, 1150000 uV

[ 3.353522] VDD_ARM : L8, 1112500 uV

[ 3.357066] VDD_ARM : L9, 1087500 uV

[ 3.360617] VDD_ARM : L10, 1050000 uV

[ 3.364241] VDD_ARM : L11, 1024999 uV

[ 3.367897] VDD_ARM : L12, 1000000 uV

[ 3.371536] VDD_ARM : L13, 975000 uV

[ 3.375094] VDD_ARM : L14, 962500 uV

[ 3.378627] VDD_ARM : L15, 937500 uV

[ 3.382199] VDD_ARM : L16, 925000 uV

[ 3.385750] VDD_ARM : L17, 912500 uV

[ 3.389287] VDD_ARM : L18, 900000 uV

[ 3.392913] VDD_ARM : L19, 900000 uV

[ 3.396430] VDD_ARM : L20, 900000 uV

[ 3.400338] [ 6 ] Memory is not LPDDR type.

[ 3.404146] DVFS : VDD_INT Voltage table set with 4 Group

[ 3.409510] DVFS : VDD_INT Voltage of L0 level is 1000000

[ 3.414959] DVFS : VDD_MIF Voltage table set with 1 Group

[ 3.420368] DVFS : VDD_MIF Voltage of L0 level is 1062500

[ 3.426704] Failed to init busfreq.

[ 3.429445] exynos_integrated_dvfs_hotplug_init, max(1700000),min(200000)

[ 3.436191] ** temperature set value **

[ 3.436195] Throttling stop_temp = 82 start_temp = 85

[ 3.436198] Waring stop_temp = 95 start_tmep = 103

[ 3.436202] Tripping temp = 110

[ 3.436204] Hw_tripping temp = 113

[ 3.436207] Trhottling freq = 800000 Warning freq = 200000

[ 3.464259] TC_voltage stop_temp = 13 Start_temp = 10

[ 3.469332] exynos5250_find_busfreq_by_volt: req_volt has no value.

[ 3.475567] get_busfreq_value error

[ 3.479002] exynos_tmu_init: cpufreq_level[16], busfreq_value[0]

[ 3.486040] Tmu Initialization is sucessful...!

[ 3.492047] s3c-fb exynos5-fb.1: window 2: fb

[ 3.496758] input: Microsoft Express Mouse as /devices/platform/s5p-ehci/usb1/1-3/1-3.2/1-3.2.3/1-3.2.3:1.0/input/input1

[ 3.506315] s3c-fb exynos5-fb.1: window 1: fb

[ 3.506949] generic-usb 0003:045E:077A.0001: input: USB HID v1.11 Mouse [Microsoft Express Mouse] on usb-s5p-ehci-3.2.3/input0

[ 3.523272] s3c-fb exynos5-fb.1: window 0: fb

[ 3.537334] otg_wakelock_init: No OTG transceiver found

[ 3.541127] s3c-rtc exynos-rtc: setting system clock to 2084-01-03 02:17:02 UTC (3597704222)

[ 3.549720] Freeing init memory: 256K

[ 3.561243] init: could not import file 'init.ar6003x.rc' from '/init.arndale.rc'

[ 3.567283] init: could not import file 'init.csr8811.rc' from '/init.arndale.rc'

[ 3.575103] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

[ 3.590387] usb 1-3.2.4: new high speed USB device number 5 using s5p-ehci

[ 3.727369] init: cannot open '/initlogo.rle'

[ 3.808544] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem

[ 3.814388] EXT4-fs (mmcblk0p2): write access will be enabled during recovery

[ 4.093716] EXT4-fs (mmcblk0p2): recovery complete

[ 4.105254] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 4.152355] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended

[ 4.167598] EXT4-fs (mmcblk0p4): recovery complete

[ 4.175835] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic

[ 4.321102] ASIX USB Ethernet Adapter:v4.4.0 13:22:06 Dec 7 2012

[ 4.321135] <6> http://www.asix.com.tw

[ 4.348847] eth0: register 'asix' at usb-s5p-ehci-3.2.4, ASIX AX88772A USB 2.0 Ethernet, 00:00:00:00:00:00

[ 4.747460] EXT4-fs (mmcblk0p3): warning: checktime reached, running e2fsck is recommended

[ 4.758712] EXT4-fs (mmcblk0p3): recovery complete

[ 4.766430] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic

[ 4.841186] init: cannot find '/system/bin/rild', disabling 'ril-daemon'

[ 4.868223] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

[ 5.193961] GPS: mt3326_gps_power: Switching GPS device on

[ 5.198168] GPS: mt3326_gps_power: ignore power control: 1

[ 5.204229] GPS: mt3326_gps_probe: Registering chardev

[ 5.218808] GPS: mt3326_gps_probe: major: 250, minor: 0

[ 5.227548] GPS: mt3326_gps_probe: Done

[ 5.422298] adb_open

[ 5.423002] mtp_bind_config

[ 5.426296] adb_bind_config

shell@android:/ $ [ 5.666998] android_work: sent uevent USB_STATE=CONNECTED

[ 5.776280] android_usb gadget: high speed config #1: android

[ 5.781301] android_work: sent uevent USB_STATE=CONFIGURED

[ 6.167733] ion_share_mmap: trying to map larger area than handle has available

[ 6.175451] ion_share_mmap: trying to map larger area than handle has available

[ 6.350366] s5p_hpd_kobject_uevent: sent uevent HDMI_STATE=online

[ 6.360339] s5p_hpd_kobject_uevent: sent uevent HDMI_STATE=online

[ 7.043650] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[ 9.212231] [mtk_wcn_stp_set_if_tx_type] set STP_IF_TX to UART.

[ 9.221466] GPS: mt3326_gps_power: Switching GPS device off

[ 9.802464] warning: `zygote' uses 32-bit capabilities (legacy support in use)

[ 9.814755] s3c-rtc exynos-rtc: rtc can't support 1970 year

[ 9.818862] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

[ 10.729187] wlan: module license 'MTK Propietary' taints kernel.

[ 10.733854] Disabling lock debugging due to kernel taint

[ 10.847073] [WMT-PLAT][E]wmt_plat_dump_pin_conf(460):[WMT-PLAT]=>dump wmt pin configuration start<=

[ 10.855353] [WMT-PLAT][E]wmt_plat_dump_pin_conf(564):[WMT-PLAT]=>dump wmt pin configuration ends<=

[ 10.863638] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(884):WMT-PLAT:BGFInt init(in pd)

[ 10.928866] mtk_stp_GPS_chrdev driver(major 191) installed.

[ 11.165122] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(894):WMT-PLAT:BGFInt mux (eint)

[ 11.171597] wake enabled for irq 456

[ 11.232605] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 11.239587] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 13.746936] <6>MPL-accODR : 28571 mHz

[ 13.766412] <6>MPL-accODR : 5000 mHz

[ 13.789825] <6>MPL-accODR : 14285 mHz

[ 14.533606] acc_open

[ 14.534318] acc_release

[ 16.044260] GPS: mt3326_gps_power: Switching GPS device off

[ 16.048382] GPS: mt3326_gps_power: ignore power control: 0

[ 16.677525] mtp_open

[ 16.690094] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9a 0x00 0x04 0x9e 0x00 0xa9 0xf0 0xca <end of dup

[ 16.870100] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f

[ 16.877985] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 16.877994] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 16.878008] [STP-C][E]stp_process_packet:mtkstp_process_packet: expected_rxseq = 4, parser.seq = 3

[ 16.911847] [STP-C][E]stp_process_packet:sequence not match && previous packet enqueue successfully, send the previous ACK (ack no =3)

[ 17.090097] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 17.241692] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 17.246429] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 17.254466] [STP-C][E]stp_process_packet:mtkstp_process_packet: expected_rxseq = 4, parser.seq = 3

[ 17.263864] [STP-C][E]stp_process_packet:sequence not match && previous packet enqueue successfully, send the previous ACK (ack no =3)

[ 17.280071] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 17.470075] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 17.510035] Bluetooth: hci0 command tx timeout

[ 17.605408] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 17.609837] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 17.624744] [STP-C][E]stp_process_packet:mtkstp_process_packet: expected_rxseq = 4, parser.seq = 3

[ 17.636984] [STP-C][E]stp_process_packet:sequence not match && previous packet enqueue successfully, send the previous ACK (ack no =3)

[ 17.690079] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 17.701049] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca <end of dup

[ 17.895096] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 17.898179] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca <end of dup

[ 17.969204] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 17.973679] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 17.990067] [STP-C][E]stp_process_packet:mtkstp_process_packet: expected_rxseq = 4, parser.seq = 3

[ 17.997604] [STP-C][E]stp_process_packet:sequence not match && previous packet enqueue successfully, send the previous ACK (ack no =3)

[ 18.075100] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 18.083542] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca <end of dup

[ 18.126172] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit

[ 18.260076] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 18.278274] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca <end of dup

[ 18.332894] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 18.337356] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 18.348759] [STP-C][E]stp_process_packet:mtkstp_process_packet: expected_rxseq = 4, parser.seq = 3

[ 18.356277] [STP-C][E]stp_process_packet:sequence not match && previous packet enqueue successfully, send the previous ACK (ack no =3)

[ 18.475093] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 18.491545] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca

[ 18.510329] Bluetooth: hci0 command tx timeout

[ 18.696638] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 18.700079] [STP-C][E]stp_dump_tx_queue:tx_seq=3,start of dump>[tx_q] len=8, limit=32,0x9b 0x00 0x04 0x9f 0x00 0xa9 0xf0 0xca <end of dup

[ 18.700115] [STP-C][E]stp_dump_tx_queue:tx_seq=4,start of dump>[tx_q] len=8, limit=32,0xa3 0x00 0x04 0xa7 0x00 0xad 0xf0 0xca <end of dup

[ 18.700148] [STP-C][E]stp_dump_tx_queue:tx_seq=5,start of dump>[tx_q] len=8, limit=32,0xab 0x00 0x04 0xaf 0x00 0xa6 0xf0 0xca <end of dup

[ 18.700182] [STP-C][E]stp_do_tx_timeout:stop retry timer for retry limit=10

[ 18.700189] drivers/mtk_combo/common/core/stp_core.c, 598, (0)

[ 18.700200] [WMT-ASSERT][E][Module]:[MT6620]NoAck, [INFO]**STP Tx Timeout**

[ 18.700203] F/W has NO any RESPONSE. Please check F/W status first

[ 18.700207]

[ 18.700220] [BTM][I]_stp_btm_handler: whole chip reset start!

[ 18.700226] [BTM][I]_stp_btm_handler: ....+

[ 18.776199] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 18.783949] drivers/mtk_combo/common/core/stp_core.c, 1983, (0)

[ 18.792550] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: go to MTKSTP_RESYNC2, buff = 7f

[ 18.912230] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 18.920161] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 19.510118] Bluetooth: hci0 command tx timeout

[ 20.510120] Bluetooth: hci0 command tx timeout

[ 21.500169] [WMT-CTRL][E]wmt_ctrl_rx(352):wmt_ctrl_rx_timeout: timeout

[ 21.505808] [WMT-C][E]wmt_core_rx(402):wmt_ctrl failed: WMT_CTRL_RX, iRet:-1

[ 21.510135] Bluetooth: hci0 command tx timeout

[ 21.518074] drivers/mtk_combo/common/core/wmt_core.c, 404, (0)

[ 21.523279] [WMT-IC][E]mt6620_patch_dwn_nodiv(1351):wmt_core: read WMT_PATCH_EVT length(5, 0) fail(-1)

[ 22.510038] Bluetooth: hci0 command tx timeout

[ 23.510125] Bluetooth: hci0 command tx timeout

[ 23.530061] [WMT-CTRL][E]wmt_ctrl_rx(352):wmt_ctrl_rx_timeout: timeout

[ 23.535223] [WMT-C][E]wmt_core_rx(402):wmt_ctrl failed: WMT_CTRL_RX, iRet:-1

[ 23.543107] drivers/mtk_combo/common/core/wmt_core.c, 404, (0)

[ 23.548132] [WMT-C][E]wmt_core_init_script(686):read (wmt reset) iRet(-1) evt len err(rx:0, exp:5)

[ 23.557701] [WMT-IC][E]mt6620_sw_init(753):init_table_3 fail(-1)

[ 23.563072] [WMT-C][E]wmt_core_stp_init(825):gMtkWmtCtx.p_ic_ops->sw_init fail:-11

[ 23.575082] [WMT-LIB][E]wmt_lib_cmb_rst(1552):[whole chip reset] fail at wmt_lib_sw_rst!

[ 23.590628] drivers/mtk_combo/common/core/stp_core.c, 1992, (0)

[ 23.595096] [STP-C][E]mtk_wcn_stp_parser_data:MTKSTP_SYNC: unexpected data, buff = 0

[ 23.722240] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 23.735049] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 24.510151] Bluetooth: hci0 command tx timeout

[ 25.510166] Bluetooth: hci0 command tx timeout

[ 26.510132] Bluetooth: hci0 command tx timeout

[ 26.513255] [WMT-CTRL][E]wmt_ctrl_rx(352):wmt_ctrl_rx_timeout: timeout

[ 26.519819] [WMT-C][E]wmt_core_rx(402):wmt_ctrl failed: WMT_CTRL_RX, iRet:-1

[ 26.527198] drivers/mtk_combo/common/core/wmt_core.c, 404, (0)

[ 26.532669] [WMT-IC][E]mt6620_patch_dwn_nodiv(1351):wmt_core: read WMT_PATCH_EVT length(5, 0) fail(-1)

[ 28.540057] [WMT-CTRL][E]wmt_ctrl_rx(352):wmt_ctrl_rx_timeout: timeout

[ 28.555053] [WMT-C][E]wmt_core_rx(402):wmt_ctrl failed: WMT_CTRL_RX, iRet:-1

[ 28.560647] drivers/mtk_combo/common/core/wmt_core.c, 404, (0)

[ 28.575048] [WMT-C][E]wmt_core_init_script(686):read (wmt reset) iRet(-1) evt len err(rx:0, exp:5)

[ 28.588711] [WMT-IC][E]mt6620_sw_init(753):init_table_3 fail(-1)

[ 28.593263] [WMT-C][E]wmt_core_stp_init(825):gMtkWmtCtx.p_ic_ops->sw_init fail:-11

[ 28.600820] [WMT-LIB][E]wmt_lib_cmb_rst(1552):[whole chip reset] fail at wmt_lib_sw_rst!

[ 28.609039] [WMT-C][E]wmt_core_ctrl(559):failed: id(4), type(0), value(0) iRet:(-1)

[ 28.616582] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 28.622494] [WMT-C][E]wmt_core_stp_init(751):open stp fail(-1)

[ 28.628183] [WMT-C][E]opfunc_pwr_on(1058):wmt_core_stp_init fail (-4)

[ 28.634581] drivers/mtk_combo/common/core/wmt_core.c, 1059, (0)

[ 28.640486] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(1), value(0) iRet:(-1)

[ 28.648178] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 28.653932] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(0), value(0) iRet:(-1)

[ 28.661549] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 28.667843] [WMT-PLAT][E]wmt_plat_eirq_ctrl(649):WMT-PLAT:BGFInt (deinit)

[ 28.674199] wake disabled for irq 456

[ 28.677985] [WMT-PLAT][E]wmt_plat_dump_pin_conf(460):[WMT-PLAT]=>dump wmt pin configuration start<=

[ 28.686862] [WMT-PLAT][E]wmt_plat_dump_pin_conf(564):[WMT-PLAT]=>dump wmt pin configuration ends<=

[ 28.695822] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(884):WMT-PLAT:BGFInt init(in pd)

[ 28.890058] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(894):WMT-PLAT:BGFInt mux (eint)

[ 28.896023] wake enabled for irq 456

[ 28.899531] wmt_plat_bgf_irq_isr bgf_irq false alarm:pin_state(1)!

[ 28.957603] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 28.964318] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 30.620084] [WMT-LIB][E]wmt_lib_put_act_op(1001):wait completion timeout

[ 30.625416] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 30.686382] [WMT-CTRL][E]wmt_ctrl_tx_ex(403):wmt state(0x801)

[ 30.690760] drivers/mtk_combo/common/core/wmt_ctrl.c, 404, (osal_test_bit(WMT_STAT_STP_EN, &pDev->state))

[ 30.700332] drivers/mtk_combo/common/core/wmt_ctrl.c, 405, (osal_test_bit(WMT_STAT_STP_OPEN, &pDev->state))

[ 30.710056] [WMT-IC][E]mt6620_patch_dwn_nodiv(1341):wmt_core: write fragSeq(18) size(1005, 0) fail(-2)

[ 30.719417] [WMT-CTRL][E]wmt_ctrl_tx_ex(403):wmt state(0x801)

[ 30.725278] drivers/mtk_combo/common/core/wmt_ctrl.c, 404, (osal_test_bit(WMT_STAT_STP_EN, &pDev->state))

[ 30.734624] drivers/mtk_combo/common/core/wmt_ctrl.c, 405, (osal_test_bit(WMT_STAT_STP_OPEN, &pDev->state))

[ 30.744358] [WMT-C][E]wmt_core_init_script(679):write (wmt reset) iRet(-2) cmd len err(0, 5)

[ 30.752920] [WMT-IC][E]mt6620_sw_init(753):init_table_3 fail(-1)

[ 30.758824] [WMT-C][E]wmt_core_stp_init(825):gMtkWmtCtx.p_ic_ops->sw_init fail:-11

[ 30.766420] [WMT-C][E]opfunc_pwr_on(1058):wmt_core_stp_init fail (-10)

[ 30.772824] drivers/mtk_combo/common/core/wmt_core.c, 1059, (0)

[ 30.779164] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(1), value(0) iRet:(-1)

[ 30.786366] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 30.792206] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(0), value(0) iRet:(-1)

[ 30.799793] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 30.805774] [WMT-PLAT][E]wmt_plat_eirq_ctrl(649):WMT-PLAT:BGFInt (deinit)

[ 30.812476] wake disabled for irq 456

[ 30.816118] [WMT-PLAT][E]wmt_plat_dump_pin_conf(460):[WMT-PLAT]=>dump wmt pin configuration start<=

[ 30.825216] [WMT-PLAT][E]wmt_plat_dump_pin_conf(564):[WMT-PLAT]=>dump wmt pin configuration ends<=

[ 30.834060] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(884):WMT-PLAT:BGFInt init(in pd)

[ 31.030079] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(894):WMT-PLAT:BGFInt mux (eint)

[ 31.036135] wake enabled for irq 456

[ 31.092176] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 31.098902] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 32.630048] [WMT-LIB][E]wmt_lib_put_act_op(1001):wait completion timeout

[ 32.635288] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 32.724407] [WMT-CTRL][E]wmt_ctrl_tx_ex(403):wmt state(0x801)

[ 32.728880] drivers/mtk_combo/common/core/wmt_ctrl.c, 404, (osal_test_bit(WMT_STAT_STP_EN, &pDev->state))

[ 32.742612] drivers/mtk_combo/common/core/wmt_ctrl.c, 405, (osal_test_bit(WMT_STAT_STP_OPEN, &pDev->state))

[ 32.755070] [WMT-IC][E]mt6620_patch_dwn_nodiv(1341):wmt_core: write fragSeq(17) size(1005, 0) fail(-2)

[ 32.762984] [WMT-CTRL][E]wmt_ctrl_tx_ex(403):wmt state(0x801)

[ 32.775187] drivers/mtk_combo/common/core/wmt_ctrl.c, 404, (osal_test_bit(WMT_STAT_STP_EN, &pDev->state))

[ 32.783305] drivers/mtk_combo/common/core/wmt_ctrl.c, 405, (osal_test_bit(WMT_STAT_STP_OPEN, &pDev->state))

[ 32.794056] [WMT-C][E]wmt_core_init_script(679):write (wmt reset) iRet(-2) cmd len err(0, 5)

[ 32.801499] [WMT-IC][E]mt6620_sw_init(753):init_table_3 fail(-1)

[ 32.807476] [WMT-C][E]wmt_core_stp_init(825):gMtkWmtCtx.p_ic_ops->sw_init fail:-11

[ 32.815004] [WMT-C][E]opfunc_pwr_on(1058):wmt_core_stp_init fail (-10)

[ 32.821497] drivers/mtk_combo/common/core/wmt_core.c, 1059, (0)

[ 32.827394] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(1), value(0) iRet:(-1)

[ 32.835017] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 32.840822] [WMT-C][E]wmt_core_ctrl(559):failed: id(5), type(0), value(0) iRet:(-1)

[ 32.848447] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 32.854412] [WMT-PLAT][E]wmt_plat_eirq_ctrl(649):WMT-PLAT:BGFInt (deinit)

[ 32.861112] wake disabled for irq 456

[ 32.864748] [WMT-C][E]opfunc_func_on(1170):func(0) pwr_on fail(-2)

[ 32.870908] drivers/mtk_combo/common/core/wmt_core.c, 1171, (0)

[ 32.960108] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 32.966295] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 32.972099] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 32.977568] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.070150] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 33.076346] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 33.082861] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 33.087624] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.180131] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 33.186323] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 33.192121] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 33.197595] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.290405] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 33.296598] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 33.302396] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 33.307869] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.400140] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 33.406332] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 33.412146] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 33.417611] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.510168] [WMT-C][E]wmt_core_ctrl(559):failed: id(3), type(0), value(0) iRet:(-2)

[ 33.516356] drivers/mtk_combo/common/core/wmt_core.c, 560, (0)

[ 33.522159] [WMT-C][E]opfunc_hw_rst(1885):STP_CLOSE failed

[ 33.527632] [WMT-LIB][E]wmt_lib_cmb_rst(1544):[whole chip reset] fail at wmt_lib_hw_rst!

[ 33.535781] [BTM][I]_stp_btm_handler: whole chip reset end!

[ 33.541317] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.548506] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.555708] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.562957] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.570086] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.577279] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.584471] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 33.591665] [STP-C][E]stp_do_tx_timeout:stop retry timer for MTKSTP_WINSIZE(7)

[ 44.105381] [WMT-LIB][E]wmt_lib_put_act_op(1001):wait completion timeout

[ 44.121233] [WMT-PLAT][E]wmt_plat_dump_pin_conf(460):[WMT-PLAT]=>dump wmt pin configuration start<=

[ 44.128976] [WMT-PLAT][E]wmt_plat_dump_pin_conf(564):[WMT-PLAT]=>dump wmt pin configuration ends<=

[ 44.137939] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(884):WMT-PLAT:BGFInt init(in pd)

[ 44.335211] [WMT-PLAT][E]wmt_plat_bgf_eint_ctrl(894):WMT-PLAT:BGFInt mux (eint)

[ 44.341234] wake enabled for irq 456

[ 44.402860] [WMT-DEV][E]wmt_dev_read_file(222):failed to open or read!(0xfffffffe, 0, 0)

[ 44.409614] [WMT-DEV][E]wmt_dev_patch_get(338):load file (/system/etc/firmware/mt6620_patch_e3_hdr.bin) fail, iRet(-1)

[ 49.662449] Unable to handle kernel NULL pointer dereference at virtual address 00000054

[ 49.669227] pgd = c0004000

[ 49.671853] [00000054] *pgd=00000000

[ 49.675601] Internal error: Oops: 5 [#1] PREEMPT SMP

[ 49.680272] Modules linked in: mtk_stp_gps mtk_fm_priv(P) mt6620_fm_drv hci_stp wlan(P) mtk_wmt_wifi gps mtk_stp_uart mtk_stp_wmt mtk_hio

[ 49.693021] CPU: 0 Tainted: P (3.0.31-g10fad59-dirty #2)

[ 49.699622] PC is at skb_put+0x10/0xa8

[ 49.703356] LR is at stp_rx_event_cb_directly+0x11c/0x5a8 [hci_stp]

[ 49.709578] pc : [<c059f454>] lr : [<bf0d040c>] psr: 60000013

[ 49.709603] sp : cb86be38 ip : cb86be70 fp : cb86be6c

[ 49.721008] r10: 00000004 r9 : bf0d3540 r8 : 00000001

[ 49.726209] r7 : bf032248 r6 : 00000000 r5 : bf0d3540 r4 : 00000000

[ 49.732709] r3 : 00000000 r2 : 00000003 r1 : 00000004 r0 : 00000000

[ 49.739215] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel

[ 49.746492] Control: 10c5387d Table: 4aafc06a DAC: 00000015

[ 49.752206]

[ 49.752218] PC: 0xc059f3d4:

[ 49.756448] f3d4 e063c00c e5902050 e15c0004 e580c0a8 e0822003 e5802050 3a000002 e1a0000c

[ 49.764595] f3f4 e24bd01c e89da8f0 e5905014 e303eed0 e590609c e34ce095 e59070a0 e3550000

[ 49.772741] f414 e3030ed8 e34c0095 01a0500e e88d1010 e58d6008 e58d700c e58d5010 eb072d7c

[ 49.780888] f434 e3030e80 e3a01093 e34c0095 ebead06a e1a0c00d e92dd8f0 e24cb004 e24dd018

[ 49.789034] f454 e5902054 e1a03001 e590509c e1a0100e e3520000 1a00000a e59040a0 e085c003

[ 49.797181] f474 e5902050 e15c0004 e580c09c e0822003 e5802050 8a000006 e1a00005 e24bd01c

[ 49.805327] f494 e89da8f0 e3030e80 e30013ef e34c0095 ebead051 e5905014 e303eed0 e59060a4

[ 49.813474] f4b4 e34ce095 e59070a8 e3550000 e3030f30 e34c0095 01a0500e e88d10c0 e58d400c

[ 49.821626]

[ 49.821639] SP: 0xcb86bdb8:

[ 49.825867] bdb8 cb86be40 ca900cc0 bf032248 cb86bdd8 cb86be3c cb86bdd8 0000040f 00000005

[ 49.834014] bdd8 00000000 bf032248 cb86be6c cb86bdf0 c004e9d0 c0048520 00000000 00000004

[ 49.842161] bdf8 00000003 00000000 00000000 bf0d3540 00000000 bf032248 00000001 bf0d3540

[ 49.850307] be18 00000004 cb86be6c cb86be70 cb86be38 bf0d040c c059f454 60000013 ffffffff

[ 49.858454] be38 bf019f1c bf019de8 000151a7 000cef3a 00000001 ffffffff 00000000 bf0d3540

[ 49.866600] be58 00000000 bf032248 cb86beac cb86be70 bf0d040c c059f450 000cef3a 000151a7

[ 49.874747] be78 bf032240 000240a8 d69ed009 bf032240 000240a8 d69ed009 00000001 bf0561b0

[ 49.882894] be98 bf02ce00 bf032240 cb86bebc cb86beb0 bf01cf60 bf0d02fc cb86bf14 cb86bec0

[ 49.891044]

[ 49.891055] IP: 0xcb86bdf0:

[ 49.895287] bdf0 00000000 00000004 00000003 00000000 00000000 bf0d3540 00000000 bf032248

[ 49.903434] be10 00000001 bf0d3540 00000004 cb86be6c cb86be70 cb86be38 bf0d040c c059f454

[ 49.911580] be30 60000013 ffffffff bf019f1c bf019de8 000151a7 000cef3a 00000001 ffffffff

[ 49.919727] be50 00000000 bf0d3540 00000000 bf032248 cb86beac cb86be70 bf0d040c c059f450

[ 49.927874] be70 000cef3a 000151a7 bf032240 000240a8 d69ed009 bf032240 000240a8 d69ed009

[ 49.936020] be90 00000001 bf0561b0 bf02ce00 bf032240 cb86bebc cb86beb0 bf01cf60 bf0d02fc

[ 49.944166] beb0 cb86bf14 cb86bec0 bf0196f0 bf01cf48 00000000 bf032248 00000004 c0a42e80

[ 49.952313] bed0 ca89ea00 d69ef000 00000000 cb86bee8 000240ab 0000000a 00000532 bf06f1c8

[ 49.960464]

[ 49.960476] FP: 0xcb86bdec:

[ 49.964707] bdec c0048520 00000000 00000004 00000003 00000000 00000000 bf0d3540 00000000

[ 49.972854] be0c bf032248 00000001 bf0d3540 00000004 cb86be6c cb86be70 cb86be38 bf0d040c

[ 49.981001] be2c c059f454 60000013 ffffffff bf019f1c bf019de8 000151a7 000cef3a 00000001

[ 49.989147] be4c ffffffff 00000000 bf0d3540 00000000 bf032248 cb86beac cb86be70 bf0d040c

[ 49.997293] be6c c059f450 000cef3a 000151a7 bf032240 000240a8 d69ed009 bf032240 000240a8

[ 50.005440] be8c d69ed009 00000001 bf0561b0 bf02ce00 bf032240 cb86bebc cb86beb0 bf01cf60

[ 50.013587] beac bf0d02fc cb86bf14 cb86bec0 bf0196f0 bf01cf48 00000000 bf032248 00000004

[ 50.021734] becc c0a42e80 ca89ea00 d69ef000 00000000 cb86bee8 000240ab 0000000a 00000532

[ 50.029895] Process kworker/u:1 (pid: 13, stack limit = 0xcb86a2f0)

[ 50.036128] Stack: (0xcb86be38 to 0xcb86c000)

[ 50.040467] be20: bf019f1c bf019de8

[ 50.048625] be40: 000151a7 000cef3a 00000001 ffffffff 00000000 bf0d3540 00000000 bf032248

[ 50.056769] be60: cb86beac cb86be70 bf0d040c c059f450 000cef3a 000151a7 bf032240 000240a8

[ 50.064916] be80: d69ed009 bf032240 000240a8 d69ed009 00000001 bf0561b0 bf02ce00 bf032240

[ 50.073062] bea0: cb86bebc cb86beb0 bf01cf60 bf0d02fc cb86bf14 cb86bec0 bf0196f0 bf01cf48

[ 50.081209] bec0: 00000000 bf032248 00000004 c0a42e80 ca89ea00 d69ef000 00000000 cb86bee8

[ 50.089356] bee0: 000240ab 0000000a 00000532 bf06f1c8 0000000a ca89ea00 d69ef000 cb84f110

[ 50.097500] bf00: 00000000 c09fd5a4 cb86bf2c cb86bf18 bf06e75c bf018090 cb84f100 c0a42e80

[ 50.105646] bf20: cb86bf64 cb86bf30 c00a6fe4 bf06e700 ca89ea05 bf06e6f4 c0a42e88 cb84f100

[ 50.113796] bf40: c0a42e80 c09a7d48 c0a42e88 cb84f110 00000089 cb86a000 cb86bfb4 cb86bf68

[ 50.121941] bf60: c00a7770 c00a6ec0 00000013 cb841ec0 c0047c80 c0047c80 c0047c80 cb84f110

[ 50.130088] bf80: c0047c80 c0047c80 c00a75c8 cb841eb0 00000002 cb84f100 c00a75c8 00000000

[ 50.138234] bfa0: 00000000 00000000 cb86bff4 cb86bfb8 c00ae448 c00a75d4 00000000 00000000

[ 50.146381] bfc0: cb84f100 00000000 00000000 00000000 cb86bfd0 cb86bfd0 cb841eb0 c00ae3b4

[ 50.154528] bfe0: c008fe44 00000013 00000000 cb86bff8 c008fe44 c00ae3c0 ffffffff ffffffff

[ 50.162655] Backtrace:

[ 50.165138] [<c059f444>] (skb_put+0x0/0xa8) from [<bf0d040c>] (stp_rx_event_cb_directly+0x11c/0x5a8 [hci_stp])

[ 50.175052] r7:bf032248 r6:00000000 r5:bf0d3540 r4:00000000

[ 50.180897] [<bf0d02f0>] (stp_rx_event_cb_directly+0x0/0x5a8 [hci_stp]) from [<bf01cf60>] (mtk_wcn_sys_if_rx+0x24/0x30 [mtk_stp_wmt])

[ 50.192930] [<bf01cf3c>] (mtk_wcn_sys_if_rx+0x0/0x30 [mtk_stp_wmt]) from [<bf0196f0>] (mtk_wcn_stp_parser_data+0x166c/0x1764 [mtk_stp_wm)

[ 50.205286] [<bf018084>] (mtk_wcn_stp_parser_data+0x0/0x1764 [mtk_stp_wmt]) from [<bf06e75c>] (stp_uart_rx_worker+0x68/0xcc [mtk_stp_uar)

[ 50.217644] [<bf06e6f4>] (stp_uart_rx_worker+0x0/0xcc [mtk_stp_uart]) from [<c00a6fe4>] (process_one_work+0x130/0x50c)

[ 50.228264] r5:c0a42e80 r4:cb84f100

[ 50.231841] [<c00a6eb4>] (process_one_work+0x0/0x50c) from [<c00a7770>] (worker_thread+0x1a8/0x490)

[ 50.240864] [<c00a75c8>] (worker_thread+0x0/0x490) from [<c00ae448>] (kthread+0x94/0x98)

[ 50.248923] [<c00ae3b4>] (kthread+0x0/0x98) from [<c008fe44>] (do_exit+0x0/0x7c8)

[ 50.256344] r7:00000013 r6:c008fe44 r5:c00ae3b4 r4:cb841eb0

[ 50.261998] Code: e1a0c00d e92dd8f0 e24cb004 e24dd018 (e5902054)

[ 50.268830] [STP-C][E]stp_dump_tx_queue:tx_seq=3,

[ 50.269693] ---[ end trace e3e5345e85dabf15 ]---

[ 50.271107] Kernel panic - not syncing: Fatal exception

[ 50.271114] Backtrace:

[ 50.271132] [<c0053834>] (dump_backtrace+0x0/0x110) from [<c076a880>] (dump_stack+0x18/0x1c)

[ 50.271139] r6:00000000 r5:c0a01180 r4:c0a01180 r3:cb86a000

[ 50.271157] [<c076a868>] (dump_stack+0x0/0x1c) from [<c076a910>] (panic+0x8c/0x1a4)

[ 50.271167] [<c076a884>] (panic+0x0/0x1a4) from [<c0053da4>] (die+0x1c8/0x1d8)

[ 50.271173] r3:cb86a000 r2:00000000 r1:cb86a000 r0:c08d6e80

[ 50.271188] r7:c08d7f9c

[ 50.271201] [<c0053bdc>] (die+0x0/0x1d8) from [<c005a814>] (__do_kernel_fault+0x7c/0x8c)

[ 50.271211] [<c005a798>] (__do_kernel_fault+0x0/0x8c) from [<c005a9ac>] (do_page_fault+0x188/0x2ec)

[ 50.271218] r8:cb86bdf0 r7:00000005 r6:00000054 r5:00000054 r4:00000000

[ 50.271233] r3:cb86bdf0

[ 50.271243] [<c005a824>] (do_page_fault+0x0/0x2ec) from [<c005ac28>] (do_translation_fault+0xa4/0xa8)

[ 50.271256] [<c005ab84>] (do_translation_fault+0x0/0xa8) from [<c0048550>] (do_DataAbort+0x3c/0xa4)

[ 50.271262] r7:cb86bdf0 r6:00000054 r5:c09b1040 r4:00000005

[ 50.271281] [<c0048514>] (do_DataAbort+0x0/0xa4) from [<c004e9d0>] (__dabt_svc+0x70/0xa0)

[ 50.271288] Exception stack(0xcb86bdf0 to 0xcb86be38)

[ 50.271295] bde0: 00000000 00000004 00000003 00000000

[ 50.271304] be00: 00000000 bf0d3540 00000000 bf032248 00000001 bf0d3540 00000004 cb86be6c

[ 50.271312] be20: cb86be70 cb86be38 bf0d040c c059f454 60000013 ffffffff

[ 50.271318] r7:bf032248 r6:00000000 r5:00000005 r4:0000040f

[ 50.271339] [<c059f444>] (skb_put+0x0/0xa8) from [<bf0d040c>] (stp_rx_event_cb_directly+0x11c/0x5a8 [hci_stp])

[ 50.271346] r7:bf032248 r6:00000000 r5:bf0d3540 r4:00000000

[ 50.271388] [<bf0d02f0>] (stp_rx_event_cb_directly+0x0/0x5a8 [hci_stp]) from [<bf01cf60>] (mtk_wcn_sys_if_rx+0x24/0x30 [mtk_stp_wmt])

[ 50.271428] [<bf01cf3c>] (mtk_wcn_sys_if_rx+0x0/0x30 [mtk_stp_wmt]) from [<bf0196f0>] (mtk_wcn_stp_parser_data+0x166c/0x1764 [mtk_stp_wm)

[ 50.271454] [<bf018084>] (mtk_wcn_stp_parser_data+0x0/0x1764 [mtk_stp_wmt]) from [<bf06e75c>] (stp_uart_rx_worker+0x68/0xcc [mtk_stp_uar)

[ 50.271466] [<bf06e6f4>] (stp_uart_rx_worker+0x0/0xcc [mtk_stp_uart]) from [<c00a6fe4>] (process_one_work+0x130/0x50c)

[ 50.271473] r5:c0a42e80 r4:cb84f100

[ 50.271486] [<c00a6eb4>] (process_one_work+0x0/0x50c) from [<c00a7770>] (worker_thread+0x1a8/0x490)

[ 50.271496] [<c00a75c8>] (worker_thread+0x0/0x490) from [<c00ae448>] (kthread+0x94/0x98)

[ 50.271506] [<c00ae3b4>] (kthread+0x0/0x98) from [<c008fe44>] (do_exit+0x0/0x7c8)

[ 50.271512] r7:00000013 r6:c008fe44 r5:c00ae3b4 r4:cb841eb0

[ 50.510527] CPU1: stopping

[ 50.513212] Backtrace:

[ 50.515645] [<c0053834>] (dump_backtrace+0x0/0x110) from [<c076a880>] (dump_stack+0x18/0x1c)

[ 50.524046] r6:ca8c6000 r5:c00470e8 r4:c09a7800 r3:ca8c6000

[ 50.529683] [<c076a868>] (dump_stack+0x0/0x1c) from [<c00483d8>] (do_IPI+0x17c/0x190)

[ 50.537482] [<c004825c>] (do_IPI+0x0/0x190) from [<c004ea4c>] (__irq_svc+0x4c/0x118)

[ 50.545192] Exception stack(0xca8c7bd0 to 0xca8c7c18)

[ 50.550220] 7bc0: c09c7acc 60000013 c09c7b28 c09c7b28

[ 50.558368] 7be0: c0a01698 00000003 c09c7acc c0a016c0 0000003a 0000003a 00000000 ca8c7ccc

[ 50.566513] 7c00: ca8c7be0 ca8c7c18 c008c38c c008cb8c 60000013 ffffffff

[ 50.573102] [<c008c724>] (vprintk+0x0/0x5c0) from [<c076aa4c>] (printk+0x24/0x2c)

[ 50.580577] [<c076aa28>] (printk+0x0/0x2c) from [<bf01ed40>] (osal_err_print+0x44/0x50 [mtk_stp_wmt])

[ 50.589739] r3:ca8c7cfc r2:00000200 r1:ca8c7cfc r0:bf02b760

[ 50.595409] [<bf01ecfc>] (osal_err_print+0x0/0x50 [mtk_stp_wmt]) from [<bf016fd8>] (stp_do_tx_timeout+0x120/0x384 [mtk_stp_wmt])

[ 50.606899] r3:0000200f r2:00000003 r1:bf021a98 r0:bf028838

[ 50.612532] r4:00000003

[ 50.615074] [<bf016eb8>] (stp_do_tx_timeout+0x0/0x384 [mtk_stp_wmt]) from [<bf011fe8>] (_stp_btm_proc+0x218/0x37c [mtk_stp_wmt])

[ 50.626588] [<bf011dd0>] (_stp_btm_proc+0x0/0x37c [mtk_stp_wmt]) from [<c00ae448>] (kthread+0x94/0x98)

[ 50.635849] [<c00ae3b4>] (kthread+0x0/0x98) from [<c008fe44>] (do_exit+0x0/0x7c8)

[ 50.643299] r7:00000013 r6:c008fe44 r5:c00ae3b4 r4:cb833e48

이렇게 죽어서 (참 파티션 어쩌구는 커널 영역 모자라서 늘리면서 넣은거구요.)

요렇게 하니까

adb wait-for-device;adb shell mount -t ext4 -o rw,remount /system;adb shell mv /system/etc/firmware/mt6620_patch_hdr.bin /system/etc/firmware/mt6620_patch_e3_hdr.bin

load file 에러나는건 없어졌는데...

U-Boot 2010.12-dirty (Dec 07 2012 - 13:03:44) for Insignal Arndale

CPU: S5PC520 Rev1.0 [Samsung SOC on SMP Platform Base on ARM CortexA15]

APLL = 1400MHz, MPLL = 800MHz, EPLL = 96MHz, VPLL = 300MHz, BPLL = 666MHz

DRAM: 2047 MiB

TrustZone Enabled BSP

BL1 version: 20120430

PMIC: S5M8767

Checking Boot Mode ... EMMC4.41

REVISION: 1.0

NAME: S5P_MSHC0

[DEBUG] Partition Map ----

fwbl1: 0 to 29 ( 30 sectors, 15360KiB)

iram block: 30 to 61 ( 32 sectors, 16384KiB)

u-boot: 62 to 717 ( 656 sectors, 335872KiB)

TZSW: 718 to 1029 ( 312 sectors, 159744KiB)

env: 1030 to 1061 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 30 to 61 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

MMC Device 0: 3816 MB

[ERROR] response timeout error : 00000104 cmd 1

MMC Device 1: 0 MB

MMC Device 2 not found

*** Warning - using default environment

Hit any key to stop autoboot: 0

[DEBUG] Partition Map ----

fwbl1: 1 to 30 ( 30 sectors, 15360KiB)

iram block: 31 to 62 ( 32 sectors, 16384KiB)

u-boot: 63 to 718 ( 656 sectors, 335872KiB)

TZSW: 719 to 1030 ( 312 sectors, 159744KiB)

env: 1031 to 1062 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 31 to 62 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

reading kernel..device 0 Start 1063, Count 32768

MMC read: dev # 0, block # 1063, count 32768 ... 32768 blocks read: OK

completed

[DEBUG] Partition Map ----

fwbl1: 1 to 30 ( 30 sectors, 15360KiB)

iram block: 31 to 62 ( 32 sectors, 16384KiB)

u-boot: 63 to 718 ( 656 sectors, 335872KiB)

TZSW: 719 to 1030 ( 312 sectors, 159744KiB)

env: 1031 to 1062 ( 32 sectors, 16384KiB)

kernel: 1063 to 33830 ( 32768 sectors, 16777216KiB)

ramdisk: 33831 to 132134 ( 98304 sectors, 50331648KiB)

bl2: 31 to 62 ( 32 sectors, 16384KiB)

[DEBUG] Partition Map ----

reading RFS..device 0 Count 33831, Start 2048

MMC read: dev # 0, block # 33831, count 2048 ... 2048 blocks read: OK

completed

Boot with zImage

## Loading init Ramdisk from Legacy Image at 41000000 ...

Image Name: Android Ramdisk Image

Image Type: ARM Linux RAMDisk Image (uncompressed)

Data Size: 167712 Bytes = 167712 Load Address: 40800000

Entry Point: 40800000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.0.31-g10fad59-dirty (hsjung@hsjung-desktop) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #2 SMP PREEMPT Fri Dec 7 13:23:39 KST 2012