기존 이솝 임베디드 포럼의 지식인 서비스가 게시판 형태로 변경되었습니다.
글 수 6,368
OOK
U-Boot 2010.12 (Mar 24 2013 - 08:08:34) for Insignal Arndale
CPU: S5PC520 Rev1.0 [Samsung SOC on SMP Platform Base on ARM CortexA15]
APLL = 1400MHz, MPLL = 800MHz, EPLL = 96MHz, VPLL = 300MHz, BPLL = 666MHz
DRAM: 2047 MiB
TrustZone Enabled BSP
BL1 version: 20120430
PMIC: S5M8767
Checking Boot Mode ... EMMC4.41
REVISION: 1.0
REVISION: 1.0
NAME: S5P_MSHC0
MMC Device 0: 3816 MB
there are pending interrupts 0x00000001
MMC Device 1: 7580 MB
MMC Device 2 not found
*** Warning - using default environment
Hit any key to stop autoboot: 0
reading kernel..device 0 Start 1063, Count 8192
MMC read: dev # 0, block # 1063, count 8192 ... 8192 blocks read: OK
completed
reading RFS..device 0 Count 9255, Start 2048
MMC read: dev # 0, block # 9255, count 2048 ... 2048 blocks read: OK
completed
Boot with zImage
## Loading init Ramdisk from Legacy Image at 41000000 ...
Image Name: Android Ramdisk Image
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 183971 Bytes = 183971 Load Address: 40800000
Entry Point: 40800000
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
<hit enter to activate fiq debugger>
위와 같은 메시지만 출력하고 멈추는데요
엔터를 친 후 console을 입력해도 부팅되는 듯 하다가 다시 위 메시지를 출력하고
멈춰 있습니다.
prebuilt된 이미지를 구웠는데 혹시 무슨 문제일까요??
올라가 있는 es3차 es6차 이미지들이 제대로 부팅되는 것을 다시 확인했습니다.
왜 증상이 다른지 모르겠네요.
압축을 푼 디렉터리에서 아래의 명령어들을 사용해 이미지들이 문제가 없는지
확인하고 fusing 하였습니다. 혹시 다른 부분이 있는지 살펴봐 주세요.
$ md5sum -c arndale-jb_mr1-es6.md5sum
arndale-jb_mr1-es6.xml: 성공
ramdisk.img.ub: 성공
system.img: 성공
zImage: 성공
$ fastboot flash kernel zImage
$ fastboot flash ramdisk ramdisk.img.ub
$ fastboot flash system system.img
$ fastboot erase userdata
$ fastboot erase cache
$ fastboot erase fat
<hit enter to activate fiq debugger>
debug> console
console mode
[ 9.917066] bio: create slab <bio-0> at 0
[ 11.219267] VDD_1.8V: 1800 mV
[ 11.538591] DC_5V: 5000 mV
[ 11.658030] VDD_3.3V: 3300 mV
[ 13.313633] SCSI subsystem initialized
[ 16.564547] usbcore: registered new interface driver usbfs
[ 16.829804] usbcore: registered new interface driver hub
[ 17.254641] usbcore: registered new device driver usb
[ 21.326229] vdd_mif range: 950 <--> 1300 mV at 1100 mV
[ 21.660790] vdd_arm range: 800 <--> 1350 mV at 1200 mV
[ 21.984538] vdd_int range: 900 <--> 1200 mV at 1000 mV
[ 22.219976] vdd_g3d range: 700 <--> 1300 mV at 1200 mV
[ 22.745247] vdd_ldo4 range: 1800 mV
[ 22.975442] vdd_ldo9 range: 2800 mV
[ 23.145672] vdd_ldo11 range: 1900 mV
[ 23.393889] vdd_ldo14 range: 1900 mV
[ 23.568870] 5m_core_1.5v: 1500 mV
[ 23.803326] cam_io_1.8v: 1800 mV
[ 24.004685] vt_cam_1.8v: 1800 mV
[ 24.320241] cam_af_2.8v: 2800 mV
[ 24.609910] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 24.723123] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 24.800620] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
[ 25.376026] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
[ 25.465155] s3c-i2c s3c2440-i2c.4: slave address 0x10
[ 25.576402] s3c-i2c s3c2440-i2c.4: bus frequency set to 378 KHz
[ 25.899986] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
[ 26.020572] s3c-i2c s3c2440-i2c.5: slave address 0x10
[ 26.099543] s3c-i2c s3c2440-i2c.5: bus frequency set to 378 KHz
[ 26.448686] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 26.535685] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 26.646441] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
[ 26.919071] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 27.029007] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 27.110272] s3c-i2c s3c2440-i2c.7: bus frequency set to 378 KHz
[ 27.494968] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 27.610967] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 27.688136] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
[ 27.985833] s3c-i2c s3c2440-i2c.8: i2c-8: S3C I2C adapter
[ 28.069391] s3c-i2c s3c2440-i2c.8: slave address 0x10
[ 28.176215] s3c-i2c s3c2440-i2c.8: bus frequency set to 378 KHz
[ 28.374462] Linux media interface: v0.10
[ 28.540923] Linux video capture interface: v2.00
[ 54.857231] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 60.315725] cfg80211: Calling CRDA to update world regulatory domain
[ 61.111987] Switching to clocksource mct-frc
[ 61.635129] hrtimer: interrupt took 16711664 ns
[ 115.606974] NET: Registered protocol family 2
[ 117.394468] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 121.895317] TCP established hash table entries: 65536 (order: 7, 524288 bytes )
[ 137.251712] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 161.308175] TCP: Hash tables configured (established 65536 bind 65536)
[ 161.615375] TCP: reno registered
[ 162.004495] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 162.374282] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 166.048067] NET: Registered protocol family 1
[ 168.617406] Trying to unpack rootfs image as initramfs...
[ 27.181597] Freeing initrd memory: 176K
[ 31.166841] Exynos5 : ARM Clock down on idle mode is enabled
[ 32.970392] EXYNOS5250 ASV(ARM : 5 MIF : 2) using fused group
[ 36.323050] exynos_tmu exynos_tmu: Current auto refresh interval(7791 nsec), Normal auto refresh interval(7791 nsec), memory throttle auto refresh internal(3895 nsec)
[ 36.658103] exynos_tmu exynos_tmu: TC ARM frequency = 200000, TC MIF frequency = 100000,TC INT frequency = 100000
[ 37.136352] exynos_tmu exynos_tmu: Tmu Initialization is sucessful...!
[ 37.970133] s3c-adc samsung-adc-v4: operating without regulator "vdd" .
[ 39.574619] s3c-adc samsung-adc-v4: attached adc driver
[ 46.345798] highmem bounce pool size: 64 pages
[ 55.633888] fuse init (API version 7.18)
[ 56.397874] msgmni has been set to 938
[ 60.104917] io scheduler noop registered
[ 60.206171] io scheduler deadline registered
[ 61.260645] io scheduler cfq registered (default)
[ 66.145371] s5p-mipi-dsim s5p-mipi-dsim: start latency exceeded, new value 9666542 ns
[ 66.334933] s5p-mipi-dsim s5p-mipi-dsim: state restore latency exceeded, new value 11632622 ns
[ 66.476983] s5p-mipi-dsim s5p-mipi-dsim: stop latency exceeded, new value 9502734 ns
[ 69.348606] s5p-mipi-dsim s5p-mipi-dsim: DSI Master driver has been completed.
[ 69.439046] s5p-mipi-dsim s5p-mipi-dsim: DSI Master state is stop state
[ 71.531283] s5p-mipi-dsim s5p-mipi-dsim: mipi-dsi driver(RGB mode) has been probed.
[ 75.816354] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 75.943658] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 79.480636] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 79.579267] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 81.129522] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 81.236018] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 82.272306] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 84.591789] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
[ 85.117715] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
[ 85.367243] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
[ 89.253364] mali mali.0: Probed as mali0
[ 96.674497] mali mali.0: start latency exceeded, new value 2621416 ns
[ 97.210090] mali mali.0: state restore latency exceeded, new value 349143042 ns
[ 97.329202] mali mali.0: stop latency exceeded, new value 1146875 ns
[ 98.676786] mali mali.0: state save latency exceeded, new value 19660792 ns
[ 98.932867] mali mali.0: stop latency exceeded, new value 19333125 ns
[ 99.477144] pd-g3d: Power-off latency exceeded, new value 368967666 ns
[ 107.357520] brd: module loaded
[ 111.306064] loop: module loaded
[ 112.615801] ============ gps power probe !!!!! ===============
[ 112.765387] ============ gps reset probe !!!!! ===============
[ 115.219055] AVDD1:
[ 116.068893] DCVDD:
[ 118.286959] wm8994 1-001a: Failed to read ID register
[ 120.728667] rdac: device handler registered
[ 121.051104] hp_sw: device handler registered
[ 121.115820] emc: device handler registered
[ 121.176441] alua: device handler registered
[ 125.356491] ahci ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 125.481993] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 133.729371] scsi0 : ahci_platform
[ 134.064587] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122fffff] port 0x100 irq 147
[ 134.633440] tun: Universal TUN/TAP device driver, 1.6
[ 134.725518] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 135.110869] usbcore: registered new interface driver asix
[ 135.213597] usbcore: registered new interface driver cdc_ether
[ 135.289619] usbcore: registered new interface driver net1080
[ 135.452640] usbcore: registered new interface driver cdc_subset
[ 135.528661] usbcore: registered new interface driver zaurus
[ 135.793918] usbcore: registered new interface driver cdc_ncm
[ 136.139785] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
[ 136.238744] exynos-drd exynos-dwc3.0: Release Number: 0x200a
[ 137.181807] ata1: SATA link down (SStatus 0 SControl 300)
[ 142.068007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 143.027618] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 143.618098] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 144.961749] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
[ 145.158849] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 145.740645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 145.875157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 145.960846] usb usb1: Product: S5P EHCI Host Controller
[ 146.062590] usb usb1: Manufacturer: Linux 3.4.5-gd5dd9f6 ehci_hcd
[ 146.162041] usb usb1: SerialNumber: s5p-ehci
[ 147.256001] hub 1-0:1.0: USB hub found
[ 147.393954] hub 1-0:1.0: 3 ports detected
[ 149.256815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 149.912011] exynos-ohci exynos-ohci: Already power on PHY
[ 150.035874] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 150.431875] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 150.910780] exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
[ 151.284990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 151.444079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 151.563355] usb usb2: Product: EXYNOS OHCI Host Controller
[ 151.632495] usb usb2: Manufacturer: Linux 3.4.5-gd5dd9f6 ohci_hcd
[ 151.742104] usb usb2: SerialNumber: exynos-ohci
[ 152.117625] hub 2-0:1.0: USB hub found
[ 152.218878] hub 2-0:1.0: 3 ports detected
[ 152.829674] usb 1-3: new high-speed USB device number 2 using s5p-ehci
[ 154.465944] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
[ 154.563593] exynos-drd exynos-dwc3.0: Release Number: 0x200a
[ 154.656654] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
[ 155.032339] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 3
[ 156.960899] exynos-xhci exynos-xhci.0: irq 104, io mem 0x12000000
[ 157.317251] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 157.424731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 157.507470] usb usb3: Product: EXYNOS xHCI Host Controller
[ 157.601022] usb usb3: Manufacturer: Linux 3.4.5-gd5dd9f6 xhci_hcd
[ 157.692117] usb usb3: SerialNumber: exynos-xhci.0
[ 158.727422] hub 3-0:1.0: USB hub found
[ 158.829003] hub 3-0:1.0: 1 port detected
[ 159.292015] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
[ 159.633785] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 4
[ 159.893144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 159.971459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 160.099910] usb usb4: Product: EXYNOS xHCI Host Controller
[ 160.177734] usb usb4: Manufacturer: Linux 3.4.5-gd5dd9f6 xhci_hcd
[ 160.278332] usb usb4: SerialNumber: exynos-xhci.0
[ 161.008239] hub 4-0:1.0: USB hub found
[ 161.300857] hub 4-0:1.0: 1 port detected
[ 162.254406] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
[ 162.464941] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 163.024946] hub 1-3:1.0: USB hub found
[ 163.243017] hub 1-3:1.0: 3 ports detected
[ 163.382117] usbcore: registered new interface driver usblp
[ 163.385230] Initializing USB Mass Storage driver...
[ 163.770418] usbcore: registered new interface driver usb-storage
[ 163.911975] USB Mass Storage support registered.
[ 167.379157] s3c-hsotg : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
[ 167.379321] s3c-hsotg : version 15 March 2009
[ 168.353022] file system registered
[ 188.481094] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0
[ 188.971795] Backtrace:
[ 189.491168] [<c00130ac>] (dump_backtrace+0x0/0x10c) from [<c05a439c>] (dump_stack+0x18/0x1c)
[ 190.005461] r6:c2042b68 r5:c07f1018 r4:c0856a00 r3:00000001
[ 190.906745] [<c05a4384>] (dump_stack+0x0/0x1c) from [<c05a44ac>] (panic+0x90/0x1d8)
[ 191.416779] [<c05a441c>] (panic+0x0/0x1d8) from [<c009aebc>] (watchdog_timer_fn+0x2b0/0x2f8)
[ 191.921243] r3:00000001 r2:01872000 r1:00000000 r0:c06e4748
[ 192.813679] r7:00000000
[ 14.267947] [<c009ac0c>] (watchdog_timer_fn+0x0/0x2f8) from [<c005650c>] (__run_hrtimer+0x7c/0x288)
[ 14.793873] [<c0056490>] (__run_hrtimer+0x0/0x288) from [<c00573b4>] (hrtimer_interrupt+0x120/0x290)
[ 15.385991] [<c0057294>] (hrtimer_interrupt+0x0/0x290) from [<c00255cc>] (exynos4_mct_tick_isr+0x48/0x78)
[ 15.936985] [<c0025584>] (exynos4_mct_tick_isr+0x0/0x78) from [<c009bb58>] (handle_irq_event_percpu+0x80/0x2f0)
[ 16.490272] r5:c07d54d4 r4:c0801e40
[ 17.039464] [<c009bad8>] (handle_irq_event_percpu+0x0/0x2f0) from [<c009be0c>] (handle_irq_event+0x44/0x64)
커널 패닉나네요 ㅠ
부트로더 파일 첨부하였습니다.
$ fastboot flash bl2 bl2.bin
$ fastboot flash bootloader u-boot.bin
으로 fusing 해서 시험해 봐 주세요.
커널 부터 재부팅 되는 현상은 처음 접하는 데요,
최근 이미지 ES6차에서도 동일한 증상인지 확인 부탁 드립니다.
[arndale][jb-mr1][es6] prebuilt image - 20130419
http://forum.insignal.co.kr/viewtopic.php?f=6&t=62#p4401