포럼 회원으로 등록하신분만 다운로드가 가능합니다. 최대 업로드 가능한 용량은 1GB 입니다.
글 수 182
AESOP release된 kernel에 포함된 코드로 시험하였습니다.
하여간 간단히 ts 동작 하는지 확인하는 방법을 찾던중 거의 참조할만한게 없어서 삽질후에 알게되어 이렇게 올립니다.
제가 따로 수정한건 없고 기존 코드 그대로 사용했습니다.
새로이 추가한 config는 Touchscreen interface 이고 아래와 같습니다.
Device Drivers --->
Input device support --->
<*> Touchscreen interface
(1024) Horizontal screen resolution
(1024) Vertical screen resolution
[*] Touchscreens --->
<*> Samsung S3C2410 touchscreen input driver
device명은 /dev/input/ts0
crw-r--r-- 1 root root 13, 128 Nov 21 2006 /dev/input/ts0
ts_event 구조는 아래와 같이 되어 있네요.
struct ts_event {
short pressure;
short x;
short y;
short millisecs;
};
위 config 추가하신후 부팅하고 첨부한 ts.c로 시험해보세요^^
필요하신분이 있었으면 좋겠네요^^
* 고도리님에 의해서 게시물 이동되었습니다 (2007-03-19 10:36)
하여간 간단히 ts 동작 하는지 확인하는 방법을 찾던중 거의 참조할만한게 없어서 삽질후에 알게되어 이렇게 올립니다.
제가 따로 수정한건 없고 기존 코드 그대로 사용했습니다.
새로이 추가한 config는 Touchscreen interface 이고 아래와 같습니다.
Device Drivers --->
Input device support --->
<*> Touchscreen interface
(1024) Horizontal screen resolution
(1024) Vertical screen resolution
[*] Touchscreens --->
<*> Samsung S3C2410 touchscreen input driver
device명은 /dev/input/ts0
crw-r--r-- 1 root root 13, 128 Nov 21 2006 /dev/input/ts0
ts_event 구조는 아래와 같이 되어 있네요.
struct ts_event {
short pressure;
short x;
short y;
short millisecs;
};
위 config 추가하신후 부팅하고 첨부한 ts.c로 시험해보세요^^
필요하신분이 있었으면 좋겠네요^^
* 고도리님에 의해서 게시물 이동되었습니다 (2007-03-19 10:36)
michael
Hi I met problem in touchscreen.
I downloaded your rootfs and tried to run the X using "startx".
The screen for calibrate touch panel comes out and I tied to click the panel, nothing happened.
I think my touch panel driver is ok. For it's running well if I used my another fs(Qtopia is used)
Can I skip this step, I mean the calibration? I just want to have a look at how the TinyX+GTK looks.
I downloaded your rootfs and tried to run the X using "startx".
The screen for calibrate touch panel comes out and I tied to click the panel, nothing happened.
I think my touch panel driver is ok. For it's running well if I used my another fs(Qtopia is used)
Can I skip this step, I mean the calibration? I just want to have a look at how the TinyX+GTK looks.
aesop's rootfs is for 2.6 input device driver. You may have kernel 2.4.x traditional device driver.
you see /etc/profile of roofs
TSLIB_TSDEVICE=/dev/input/event1
TSLIB_CONFFILE=/etc/tslib/ts.conf-input
This is for 2.6 input device driver.
If you have kernel 2.4.x style touch driver. see /etc.2420's profile
TSLIB_TSDEVICE=/dev/touchscreen/0raw
TSLIB_CONFFILE=/etc/tslib/ts.conf-h3600-2.4
This is for hp ipaq 3600 touch driver(traditional 2.4.x touch driver)
Qt & Qtopia only use 2.4.x style touch driver & calibrate.
you see /etc/profile of roofs
TSLIB_TSDEVICE=/dev/input/event1
TSLIB_CONFFILE=/etc/tslib/ts.conf-input
This is for 2.6 input device driver.
If you have kernel 2.4.x style touch driver. see /etc.2420's profile
TSLIB_TSDEVICE=/dev/touchscreen/0raw
TSLIB_CONFFILE=/etc/tslib/ts.conf-h3600-2.4
This is for hp ipaq 3600 touch driver(traditional 2.4.x touch driver)
Qt & Qtopia only use 2.4.x style touch driver & calibrate.
^^
That's good...
Tinyx(aka.Xkdrive) is very fast. but large capacity.
I prefer SDL, too. it is simple & fast.
If you want to get SDL application launcher. visit to www.pmplab.org
This site is open source application site used in I-station V43 PMP.
SDL launcher is good solution for visual multimedia device.
That's good...
Tinyx(aka.Xkdrive) is very fast. but large capacity.
I prefer SDL, too. it is simple & fast.
If you want to get SDL application launcher. visit to www.pmplab.org
This site is open source application site used in I-station V43 PMP.
SDL launcher is good solution for visual multimedia device.
